MICROSTRUCTURE CHARACTERISTICS OF Fe-0.85Mo-3Mn-0.5C SINTERED STEEL IN DEPENDENCE ON SINTERING CONDITIONS

被引：0
|
作者：
Simkulet, Vladimir [1 ]
Parilak, L'udovit [1 ]
机构：
[1] Univ Kosice Seat Presov, Fac Mfg Technol Tech, Presov 08001, Slovakia
来源：
CHEMICKE LISTY | 2012年 / 106卷
关键词：
powder metallurgy; alloying; microhardness measurement;
D O I：
暂无
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
V. Simkulet, and L. Parilak (Faculty of Manufacturing Technologies of the Technical University of Kosice with a seat in Presov, Slovakia): Microstructures Characteristics of Fe-0.85Mo-3Mn-0.5C Sintered Steel in Dependence on Sintering Conditions Manganese in combination with Molybdenum atomized prealloyed powder forms a new group of sintered high strength steels. The final properties of these steels depend on microstructure homogeneity. The aim was to investigate the alloying of molybdenum prealloyed powder with manganese in comparison with plain iron powder. The circular cross section samples were prepared for the investigation from basis water atomized and plain iron powders. The microstructure characteristics of sintered samples were characterized by micro hardness measurement.
引用
收藏
页码：S529 / S530
页数：2
相关论文
共 50 条
  • [1] Effect of small amount of Mo addition on microstructure and mechanical properties of Fe-0.5Mn-0.5C sintered steels
    Li, Song-Lin, 1600, Central South University (19):
  • [2] Microstructure, mechanical properties and failure of Fe-3Mn-0.7C sintered steel
    Dudrová, E
    Kabátová, M
    Bidulsky, R
    METALURGIJA, 2003, 42 (01): : 3 - 8
  • [3] Thermal analysis of prealloyed Fe-3Cr-0.5Mo sintered steel
    Campos, M
    Blanco, L
    Torralba, JM
    JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2006, 84 (02) : 483 - 487
  • [4] Effect of Mn addition and Its Nitridation on Microstructure and Properties of Sintered Fe-1Mn-0.5C Low-Alloy Steel
    Huizhu Chen
    Peng Luo
    Yingjie Yang
    Anping Long
    Songlin Li
    Journal of Materials Engineering and Performance, 2017, 26 : 4481 - 4490
  • [5] Effect of Mn addition and Its Nitridation on Microstructure and Properties of Sintered Fe-1Mn-0.5C Low-Alloy Steel
    Chen, Huizhu
    Luo, Peng
    Yang, Yingjie
    Long, Anping
    Li, Songlin
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2017, 26 (09) : 4481 - 4490
  • [6] MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Fe-2.2Mn-1.5Cr-0.2Mo-0.3C STEEL SINTERED AT 1120°C AND 1250°C
    Dudek, P.
    Cias, A.
    ARCHIVES OF METALLURGY AND MATERIALS, 2008, 53 (03) : 809 - 816
  • [7] Thermal analysis of prealloyed Fe–3Cr–0.5Mo sintered steel
    M. Campos
    L. Blanco
    J. M. Torralba
    Journal of Thermal Analysis and Calorimetry, 2006, 84 : 483 - 487
  • [8] Tensile property and microstructure of Fe-22Mn-0.5C TWIP steel
    Lan, Peng
    Zhang, Jiaquan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 707 : 373 - 382
  • [9] Effect of local sintering microatmosphere on mechanical properties of Fe-3Cr-0.5Mo-0.6C steel
    Cias, A.
    POWDER METALLURGY, 2013, 56 (03) : 231 - 238
  • [10] Effect of annealing conditions on the microstructure and tensile properties of 0.5 V containing Fe-16Mn-0.8C-0.5Si steel
    Kwon, Yunik
    Zargaran, A.
    Ryu, Joo Hyun
    Kim, Nack J.
    SCRIPTA MATERIALIA, 2019, 172 : 125 - 129
12345