Effect of graphite content on the microstructure and mechanical properties of Al5SiC-xCgr hybrid composites produced by powder metallurgy

被引：0

作者：

Wasik, Anna ^{[1
]}

Leszczynska-Madej, Beata ^{[1
]}

Madej, Marcin ^{[2
]}

机构：

[1] AGH Univ Sci & Technol, Fac Non Ferrous Met, Dept Mat Sci & Nonferrous Met Engn, Mickiewicza 30 Ave, Krakow, Poland

[2] AGH Univ Sci & Technol, Fac Met Engn & Ind Comp Sci, Dept Phys & Powder Met, Mickiewicza 30 Ave, Krakow, Poland

来源：

MRS COMMUNICATIONS | 2023年 / 13卷 / 01期

关键词：

Composite; Hybrid; Powder metallurgy; Microstructure; Scanning electron microscopy (SEM); Tribology; ALUMINUM-MATRIX COMPOSITES;

D O I：

10.1557/s43579-023-00322-9

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effect of the addition of graphite (2, 8 wt%) in aluminum and in Al5SiC composites on the microstructure and mechanical properties was investigated. The hybrid composites were fabricated through powder metallurgy technology, applying single-action compaction press (300 MPa) and free sintering (600?) in a protective nitrogen atmosphere. The addition of SiC particles to Al-xCg(r) composites reduced the weight loss in friction process. On the other hand, the addition of graphite in hybrid composites reduced the friction coefficient in relation to the matrix and the Al5SiC composites. The SEM analysis of worn surface revealed both abrasive and adhesive wear tracks.

引用

页码：121 / 128

页数：8

共 50 条

[31] Some properties of Cu-SiC composites produced by powder metallurgy method
Efe, G. F. Celebi
Altinsoy, I.
Ipek, M.
Zeytin, S.
Bindal, C.
KOVOVE MATERIALY-METALLIC MATERIALS, 2011, 49 (02): : 131 - 136
[32] Mechanical and Electrical Properties of Nano Al-Matrix Composites Reinforced with SiC and Prepared by Powder Metallurgy
Zawrah, Mahmoud F.
El-Meligy, Wafaa M.
Saudi, Heba H. A.
Ramadan, Safae
Taha, Mohammed A.
BIOINTERFACE RESEARCH IN APPLIED CHEMISTRY, 2022, 12 (02): : 2068 - 2083
[33] Effect of Ni content on the microstructure, thermal properties, and morphology of Ni-SiC composites produced by mechanical alloying
Baron, A. F.
Guerrero, J.
Gonzalez, J. M.
Gomez, A.
Jurado, A.
Sanchez Sthepa, H.
CERAMICS INTERNATIONAL, 2017, 43 (02) : 2592 - 2597
[34] MECHANICAL PROPERTIES AND WEAR RESISTANCE OF Al4Cu-SiC COMPOSITES FABRICATED BY POWDER METALLURGY
Wasik, Anna
Leszczynska-Madej, Beata
Madej, Marcin
28TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2019), 2019, : 1260 - 1266
[35] A review on effect of powder metallurgy process on mechanical and tribological properties of Hybrid nano composites
Patil, Omkar M.
Khedkar, Nitin N.
Sachit, T. S.
Singh, T. P.
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 5802 - 5808
[36] Effect of SiC Content on Mechanical and Tribological Properties of Al2024-SiC Composites
Dey, Dipankar
Bhowmik, Abhijit
Biswas, Ajay
SILICON, 2022, 14 (01) : 1 - 11
[37] Effect of SiC Content on Mechanical and Tribological Properties of Al2024-SiC Composites
Dipankar Dey
Abhijit Bhowmik
Ajay Biswas
Silicon, 2022, 14 : 1 - 11
[38] Experimental Investigations on the Mechanical Properties, Microstructure and Corrosion Effect of Cu-20Al-4Ni/SiC Composites Synthesized Using Powder metallurgy Route
L. Mamundi Azaath
U. Natarajan
G. Veerappan
M. Ravichandran
S. Marichamy
Silicon, 2022, 14 : 5993 - 6002
[39] Experimental Investigations on the Mechanical Properties, Microstructure and Corrosion Effect of Cu-20Al-4Ni/SiC Composites Synthesized Using Powder metallurgy Route
Azaath, L. Mamundi
Natarajan, U.
Veerappan, G.
Ravichandran, M.
Marichamy, S.
SILICON, 2022, 14 (11) : 5993 - 6002
[40] Development of Al-SiC-TiO2 hybrid composite using powder metallurgy route and the influence of TiO2 content variation on microstructure and mechanical properties
Mishra, Dinesh Kumar
Pattanaik, Rutuparna
Behera, Gourahari
Dalai, Renu Prava
Badjena, Sushant Kumar
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2023, 114 (4-5) : 431 - 436

← 1 2 3 4 5 →