Effect of graphite content on the microstructure and mechanical properties of Al5SiC-xCgr hybrid composites produced by powder metallurgy

被引：0
|
作者：
Wasik, Anna [1 ]
Leszczynska-Madej, Beata [1 ]
Madej, Marcin [2 ]
机构：
[1] AGH Univ Sci & Technol, Fac Non Ferrous Met, Dept Mat Sci & Nonferrous Met Engn, Mickiewicza 30 Ave, Krakow, Poland
[2] AGH Univ Sci & Technol, Fac Met Engn & Ind Comp Sci, Dept Phys & Powder Met, Mickiewicza 30 Ave, Krakow, Poland
来源：
MRS COMMUNICATIONS | 2023年 / 13卷 / 01期
关键词：
Composite; Hybrid; Powder metallurgy; Microstructure; Scanning electron microscopy (SEM); Tribology; ALUMINUM-MATRIX COMPOSITES;
D O I：
10.1557/s43579-023-00322-9
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of the addition of graphite (2, 8 wt%) in aluminum and in Al5SiC composites on the microstructure and mechanical properties was investigated. The hybrid composites were fabricated through powder metallurgy technology, applying single-action compaction press (300 MPa) and free sintering (600?) in a protective nitrogen atmosphere. The addition of SiC particles to Al-xCg(r) composites reduced the weight loss in friction process. On the other hand, the addition of graphite in hybrid composites reduced the friction coefficient in relation to the matrix and the Al5SiC composites. The SEM analysis of worn surface revealed both abrasive and adhesive wear tracks.
引用
收藏
页码：121 / 128
页数：8
相关论文
共 50 条
  • [21] Effect of Sintering Temperature on Microstructure and Mechanical Properties of Ti-Nb-Sn-HA Composites Produced by Powder Metallurgy
    Nawai, Wan Nurul Syaza Wan
    Kasani, Norhanida Awang
    Nordin, Razif
    Ahmad, Zainal Arifin
    Shamsuddin, Saidatulakmar
    PROCESS AND ADVANCED MATERIALS ENGINEERING, 2014, 625 : 180 - +
  • [22] Investigation of graphite effect on the mechanical and tribological properties of Al 7075-SiC-graphite hybrid metal matrix composites
    Sridhar A.
    Lakshmi K.P.
    Tribologia, 2020, 37 (01): : 26 - 32
  • [23] SiC content effect on the properties of Cu-SiC composites produced by mechanical alloying
    Prosviryakov, A. S.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 632 : 707 - 710
  • [24] Evolution of Microstructure and Mechanical Properties of CNTs/Al-Mg Composites Prepared by Powder Metallurgy
    Zhou, Lei
    Xu, Fushun
    Cai, Xiaolan
    Chen, Yaguang
    Guo, Li
    Yue, Youcheng
    INTEGRATED FERROELECTRICS, 2022, 228 (01) : 1 - 8
  • [25] Effect of BN nanoparticle content in SiC matrix on microstructure and mechanical properties of SiC/SiC composites
    Shimoda, Kazuya
    Hinoki, Tatsuya
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2023, 20 (04) : 2466 - 2477
  • [26] Effect of the Graphite Content on the Tribological Behavior of Al/Gr and Al/30SiC/Gr Composites Processed by In Situ Powder Metallurgy (IPM) Method
    S. Mahdavi
    F. Akhlaghi
    Tribology Letters, 2011, 44 : 1 - 12
  • [27] Effect of the Graphite Content on the Tribological Behavior of Al/Gr and Al/30SiC/Gr Composites Processed by In Situ Powder Metallurgy (IPM) Method
    Mahdavi, S.
    Akhlaghi, F.
    TRIBOLOGY LETTERS, 2011, 44 (01) : 1 - 12
  • [28] Effect of iron addition on microstructure, mechanical and magnetic properties of Al-matrix composite produced by powder metallurgy route
    Fathy, A.
    El-Kady, Omyma
    Mohammed, Moustafa M. M.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2015, 25 (01) : 46 - 53
  • [29] Effect of CeO2 Content on Microstructure and Properties of SiCp/Al-Si Composites Prepared by Powder Metallurgy
    Dong, Xuedan
    Wang, Aiqin
    Xie, Jingpei
    Zhu, Pengfei
    MATERIALS, 2021, 14 (16)
  • [30] INVESTIGATION OF STRUCTURAL AND MECHANICAL PROPERTIES OF Al-Al2O3-SiC-WS2 HYBRID COMPOSITES FABRICATED BY POWDER METALLURGY
    Biswal, Sweta Rani
    Sahoo, Seshadev
    COMPOSITES THEORY AND PRACTICE, 2023, 23 (01): : 50 - 55
12345