Investigation on effect of injector orifice diameter on injector atomization and combustion characteristics of pulse detonation combustor

被引:0
|
作者
Ding-Ding, Wang [1 ]
Long-Xi, Zheng [1 ]
Jie, Lu [1 ]
Wen-Hao, Tan [1 ]
Qing, Li [1 ]
机构
[1] Northwest Polytech Univ, Sch Power & Energy, Xian 710129, Peoples R China
关键词
PDC; pneumatic atomizing injector; fuel atomization; fuel consumption rate;
D O I
10.1515/tjj-2023-0088
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
To reduce the fuel consumption rate of the pulse detonation combustor (PDC), an experimental study was carried out to study the influence of the injector aperture on the atomization particle size of the pneumatic atomization injector and its combustion characteristics of the PDC. The test used gasoline\air as the fuel and oxidant, tested the atomization particle size and obtained the detonation characteristics of PDC. The research results show that the atomization particle size of the injector under the three apertures decreases with the increase of the mixed air volume and increases with the increase of the fuel flow rate. The injector atomization effect is better when the aperture is 1.4 mm, the atomization particle size range is 71.8-119.8 mu m. PDC using different injectors can achieve stable operation in the range of 5-20 Hz. Under the same working conditions, the smaller the injector aperture, the higher the average detonation pressure of the PDC.
引用
收藏
页码:845 / 852
页数:8
相关论文
共 50 条
  • [41] Continuous Injector Geometry Variation to Augment Rotating Detonation Combustor Operation and Performance
    Plaehn, Ethan W.
    Gejji, Rohan M.
    Walters, Ian V.
    Slabaugh, Carson D.
    JOURNAL OF PROPULSION AND POWER, 2024, 40 (03) : 420 - 438
  • [42] Atomization Characteristics of Camelina-Based Alternative Aviation Fuels Discharging From Dual-Orifice Injector
    Sivakumar, D.
    Sakthikumar, R.
    Raghunandan, B. N.
    Hu, John T. C.
    Puri, S. K.
    Jain, A. K.
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2015, 137 (08):
  • [43] Experimental Investigation on Ignition and Detonation Characteristics of U-Bend Pulse Detonation Combustor
    Tan, Wen-Hao
    Zheng, Long-Xi
    Huang, Kang
    Wang, Ling-Yi
    Tuijin Jishu/Journal of Propulsion Technology, 2022, 43 (01): : 167 - 174
  • [44] An experimental study of a spring-loaded needle-free injector: Influence of the ejection volume and injector orifice diameter
    Dongping Zeng
    Ni Wu
    Lu Xie
    Xiaoxiao Xia
    Yong Kang
    Journal of Mechanical Science and Technology, 2019, 33 : 5581 - 5588
  • [45] NUMERICAL-ANALYSIS OF SSME PREBURNER INJECTOR ATOMIZATION AND COMBUSTION PROCESSES
    LIANG, PY
    JENSEN, RJ
    CHANG, YM
    JOURNAL OF PROPULSION AND POWER, 1987, 3 (06) : 508 - 514
  • [46] NUMERICAL ANALYSIS OF SSME PREBURNER INJECTOR ATOMIZATION AND COMBUSTION PROCESSES.
    Liang, P.Y.
    Jensen, R.J.
    Chang, Y.M.
    1600, (03):
  • [47] Injector-Driven Combustion Instabilities in a Hydrogen/Oxygen Rocket Combustor
    Groening, Stefan
    Hardi, Justin S.
    Suslov, Dmitry
    Oschwald, Michael
    JOURNAL OF PROPULSION AND POWER, 2016, 32 (03) : 560 - 573
  • [48] Effect of Hydrophilicity/Hydrophobicity of the Injector Wall on Atomization Performance
    Zhang, Xiaoyu
    Zhang, Xiaolei
    Duan, Runze
    Liu, Lujia
    INTERNATIONAL JOURNAL OF AEROSPACE ENGINEERING, 2022, 2022
  • [49] Study of flow and combustion characteristics of swirl injector
    Deng Y.-B.
    Yu F.-R.
    Jiang X.
    Song D.-Y.
    2016, Journal of Propulsion Technology (37): : 1341 - 1349
  • [50] Numerical Investigation on detonation combustion waves of hydrogen-air mixture in pulse detonation combustor with blockage
    Debnath, Pinku
    Pandey, K. M.
    ADVANCES IN AIRCRAFT AND SPACECRAFT SCIENCE, 2023, 10 (03): : 203 - 222