Investigation on effect of injector orifice diameter on injector atomization and combustion characteristics of pulse detonation combustor

被引:0
|
作者
Ding-Ding, Wang [1 ]
Long-Xi, Zheng [1 ]
Jie, Lu [1 ]
Wen-Hao, Tan [1 ]
Qing, Li [1 ]
机构
[1] Northwest Polytech Univ, Sch Power & Energy, Xian 710129, Peoples R China
关键词
PDC; pneumatic atomizing injector; fuel atomization; fuel consumption rate;
D O I
10.1515/tjj-2023-0088
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
To reduce the fuel consumption rate of the pulse detonation combustor (PDC), an experimental study was carried out to study the influence of the injector aperture on the atomization particle size of the pneumatic atomization injector and its combustion characteristics of the PDC. The test used gasoline\air as the fuel and oxidant, tested the atomization particle size and obtained the detonation characteristics of PDC. The research results show that the atomization particle size of the injector under the three apertures decreases with the increase of the mixed air volume and increases with the increase of the fuel flow rate. The injector atomization effect is better when the aperture is 1.4 mm, the atomization particle size range is 71.8-119.8 mu m. PDC using different injectors can achieve stable operation in the range of 5-20 Hz. Under the same working conditions, the smaller the injector aperture, the higher the average detonation pressure of the PDC.
引用
收藏
页码:845 / 852
页数:8
相关论文
共 50 条
  • [31] Periodic atomization characteristics of an impinging jet injector element modulated by Klystron effect
    Anlong YANG
    Bin LI
    Shangrong YANG
    Yunfei XU
    Longfei LI
    Chinese Journal of Aeronautics, 2018, 31 (10) : 1973 - 1984
  • [32] Periodic atomization characteristics of an impinging jet injector element modulated by Klystron effect
    Yang, Anlong
    Li, Bin
    Yang, Shangrong
    Xu, Yunfei
    Li, Longfei
    CHINESE JOURNAL OF AERONAUTICS, 2018, 31 (10) : 1973 - 1984
  • [33] Periodic atomization characteristics of an impinging jet injector element modulated by Klystron effect
    YANG, Anlong (allanyang1984@qq.com), 1973, Chinese Journal of Aeronautics (31):
  • [34] An experimental study of a spring-loaded needle-free injector: Influence of the ejection volume and injector orifice diameter
    Zeng, Dongping
    Wu, Ni
    Xie, Lu
    Xia, Xiaoxiao
    Kang, Yong
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2019, 33 (11) : 5581 - 5588
  • [35] Experimental investigation of the orifice-to-orifice variability in jet velocities in a diesel injector
    Coratella, Carlo
    Sahu, Amrit
    Parry, Lewis
    Xu, Hongming
    Ma, Xiao
    FUEL, 2020, 280
  • [36] Quasi-Two-Dimensional Simulation of a Rotating Detonation Engine Combustor and Injector
    Lau-Chapdelaine, S. She-Ming
    Radulescu, Matei, I
    Hong, Zekai
    JOURNAL OF PROPULSION AND POWER, 2024, 40 (01) : 42 - 49
  • [37] Dynamic cavitation characteristics of the DME blended fuel and enhanced atomization performance using cavity-orifice injector
    Liu, Wenchuan
    Yuan, Bo
    Pan, Liangming
    Xie, Chengli
    Liu, Qi
    JOURNAL OF NATURAL GAS SCIENCE AND ENGINEERING, 2021, 95
  • [38] Periodic atomization characteristics of an impinging jet injector element modulated by Klystron effect
    Anlong YANG
    Bin LI
    Shangrong YANG
    Yunfei XU
    Longfei LI
    Chinese Journal of Aeronautics, 2018, (10) : 1973 - 1984
  • [39] Experimental study on atomization characteristics of space engine swirl injector working in pulse mode in vacuum
    Wang, Ping
    Yao, Zhaopu
    Mao, Xiaofang
    Liu, Qiyou
    Cheng, Jinbo
    Fu, Qingfei
    Yang, Lijun
    Tuijin Jishu/Journal of Propulsion Technology, 45 (09):
  • [40] Influence of injector configuration on secondary wave formation and propagation in a rotating detonation combustor
    Ullman, Michael
    Raman, Venkat
    APPLICATIONS IN ENERGY AND COMBUSTION SCIENCE, 2024, 20