Investigation on effect of injector orifice diameter on injector atomization and combustion characteristics of pulse detonation combustor

被引:0
|
作者
Ding-Ding, Wang [1 ]
Long-Xi, Zheng [1 ]
Jie, Lu [1 ]
Wen-Hao, Tan [1 ]
Qing, Li [1 ]
机构
[1] Northwest Polytech Univ, Sch Power & Energy, Xian 710129, Peoples R China
关键词
PDC; pneumatic atomizing injector; fuel atomization; fuel consumption rate;
D O I
10.1515/tjj-2023-0088
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
To reduce the fuel consumption rate of the pulse detonation combustor (PDC), an experimental study was carried out to study the influence of the injector aperture on the atomization particle size of the pneumatic atomization injector and its combustion characteristics of the PDC. The test used gasoline\air as the fuel and oxidant, tested the atomization particle size and obtained the detonation characteristics of PDC. The research results show that the atomization particle size of the injector under the three apertures decreases with the increase of the mixed air volume and increases with the increase of the fuel flow rate. The injector atomization effect is better when the aperture is 1.4 mm, the atomization particle size range is 71.8-119.8 mu m. PDC using different injectors can achieve stable operation in the range of 5-20 Hz. Under the same working conditions, the smaller the injector aperture, the higher the average detonation pressure of the PDC.
引用
收藏
页码:845 / 852
页数:8
相关论文
共 50 条
  • [21] Study on Spray Characteristics and 0-D Model of Marine Injector with Large Orifice Diameter
    Lu, Xiuwei
    Wei, Lijiang
    Sun, Rongkang
    COMBUSTION SCIENCE AND TECHNOLOGY, 2024,
  • [22] Combustion Characteristics of a Coaxial Porous Injector
    Kim, Dohun
    Lee, Gunwoong
    Koo, Jaye
    JOURNAL OF PROPULSION AND POWER, 2014, 30 (06) : 1620 - 1627
  • [23] Study on atomization characteristic of dual-orifice pressure-swirl injector
    Zhao, Fang
    Li, Xianfeng
    Ren, Zebin
    Shi, Yu
    Yang, Yang
    INTERNATIONAL CONFERENCE ON FLUID MECHANICS AND INDUSTRIAL APPLICATIONS (FMIA 2017), 2017, 916
  • [24] Numerical investigation on implication of innovative hydrogen strut in comparison with multi strut injector on performance and combustion characteristics in a scramjet combustor
    Kireeti, S. K.
    Sastry, Gadepalli Ravikiran
    Gugulothu, Santhosh Kumar
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2022, 47 (99) : 41932 - 41946
  • [25] SPRAY ATOMIZATION CHARACTERISTICS OF A LOW PRESSURE ROTARY INJECTOR
    Ghate, Kushal
    Sharma, Shraddha
    Sundararajan, Thirumalachari
    ATOMIZATION AND SPRAYS, 2019, 29 (06) : 493 - 519
  • [26] Experimental studies on the unsteady atomization characteristics of a swirl injector
    Liu, Lu-Hao
    Wang, Huan-Ran
    Fu, Qing-Fei
    ACTA ASTRONAUTICA, 2022, 194 : 162 - 173
  • [27] Effects of Backpressure on Atomization Characteristics of Impinging Jet Injector
    Li J.-N.
    Lei F.-P.
    Zhou L.-X.
    Tuijin Jishu/Journal of Propulsion Technology, 2020, 41 (04): : 847 - 859
  • [28] Experiments on atomization and spray characteristics of an effervescent strut injector
    Chakraborty, Mayukhmali
    Vaidyanathan, Aravind
    Desikan, S. L. N.
    PHYSICS OF FLUIDS, 2021, 33 (01)
  • [29] Shock Propagation Through a Square Injector: Investigation into Rotating-Detonation Engine Injector Dynamics
    Pryor, Jeremy
    Weightman, Joel
    Sandberg, Richard
    Bohon, Myles D.
    Edgington-Mitchell, Daniel
    AIAA JOURNAL, 2025, 63 (03) : 839 - 853
  • [30] Experimental and numerical investigation of transverse combustion instability in a rectangle multi-injector rocket combustor
    Ren, Yongjie
    Guo, Kangkang
    Feng, Songjiang
    Tong, Yiheng
    Lin, Wei
    Nie, Wansheng
    ACTA ASTRONAUTICA, 2023, 213 : 215 - 230