Investigation on effect of injector orifice diameter on injector atomization and combustion characteristics of pulse detonation combustor

被引:0
|
作者
Ding-Ding, Wang [1 ]
Long-Xi, Zheng [1 ]
Jie, Lu [1 ]
Wen-Hao, Tan [1 ]
Qing, Li [1 ]
机构
[1] Northwest Polytech Univ, Sch Power & Energy, Xian 710129, Peoples R China
关键词
PDC; pneumatic atomizing injector; fuel atomization; fuel consumption rate;
D O I
10.1515/tjj-2023-0088
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
To reduce the fuel consumption rate of the pulse detonation combustor (PDC), an experimental study was carried out to study the influence of the injector aperture on the atomization particle size of the pneumatic atomization injector and its combustion characteristics of the PDC. The test used gasoline\air as the fuel and oxidant, tested the atomization particle size and obtained the detonation characteristics of PDC. The research results show that the atomization particle size of the injector under the three apertures decreases with the increase of the mixed air volume and increases with the increase of the fuel flow rate. The injector atomization effect is better when the aperture is 1.4 mm, the atomization particle size range is 71.8-119.8 mu m. PDC using different injectors can achieve stable operation in the range of 5-20 Hz. Under the same working conditions, the smaller the injector aperture, the higher the average detonation pressure of the PDC.
引用
收藏
页码:845 / 852
页数:8
相关论文
共 50 条
  • [1] INVESTIGATION ON THE EFFECT OF INJECTOR MODIFICATION ON INJECTOR ATOMIZATION AND U-BEND PULSE DETONATION COMBUSTION CHARACTERISTICS
    Wang, Dingding
    Zheng, Longxi
    Lu, Jie
    Tan, Wenhao
    Li, Qing
    THERMAL SCIENCE, 2024, 28 (2C): : 1729 - 1739
  • [2] Experimental investigation on coaxial injector of pulse detonation rocket engines
    Yao, Kui-Guang
    Fan, Wei
    Yan, Yu
    Zhang, Yong-Jian
    Tuijin Jishu/Journal of Propulsion Technology, 2014, 35 (03): : 428 - 432
  • [3] Effect of fuel temperature on the atomization characteristics for swirl injector
    Li W.
    Cai W.
    Duan Z.
    Di D.
    Yan Y.
    Atomization and Sprays, 2021, 30 (10) : 697 - 711
  • [4] EFFECT OF FUEL TEMPERATURE ON THE ATOMIZATION CHARACTERISTICS FOR SWIRL INJECTOR
    Li, Wei
    Cai, Wenzhe
    Duan, Zhengliang
    Di, Dong
    Yan, Yingwen
    ATOMIZATION AND SPRAYS, 2020, 30 (10) : 697 - 711
  • [5] The Effect of the Structure and Parameters of Diesel Injector on Atomization Characteristics
    Chen, Guojin
    Chen, Chang
    Yuan, Yiming
    Zhu, Lingjun
    Lou, Xiang
    INTEGRATED FERROELECTRICS, 2021, 219 (01) : 145 - 159
  • [6] Numerical investigation on implication of innovative hydrogen strut injector on performance and combustion characteristics in a scramjet combustor
    Kireeti, Sribhashyam Krishna
    Ravikiran Sastry, Gadepalli
    Gugulothu, Santosh Kumar
    INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES, 2021, : S43 - S57
  • [7] Investigation of strut-ramp injector in a Scramjet combustor: Effect of strut geometry, fuel and jet diameter on mixing characteristics
    Soni, Rahul Kumar
    De, Ashoke
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2017, 31 (03) : 1169 - 1179
  • [8] Investigation of strut-ramp injector in a Scramjet combustor: Effect of strut geometry, fuel and jet diameter on mixing characteristics
    Rahul Kumar Soni
    Ashoke De
    Journal of Mechanical Science and Technology, 2017, 31 : 1169 - 1179
  • [9] Numerical Investigation of Detonation Combustion Wave in Pulse Detonation Combustor with Ejector
    Debnath, P.
    Pandey, K. M.
    JOURNAL OF APPLIED FLUID MECHANICS, 2017, 10 (02) : 725 - 733
  • [10] Research on combustion stability characteristics of scramjet combustor equipped with strut injector
    Quan, Fuxu
    Chang, Juntao
    Lv, Chengkun
    Wu, Guangwei
    Kong, Chen
    APPLIED THERMAL ENGINEERING, 2025, 258