Study on Crack Propagation of Rock Bridge in Rock-like Material with Fractures under Compression Loading with Sudden Change Rate

被引:1
|
作者
Huang, Xuanqi [1 ]
Wan, Wen [1 ,2 ,3 ]
Wang, Min [2 ]
Zhou, Yu [2 ]
Liu, Jie [4 ]
Chen, Wei [4 ]
机构
[1] Hunan Univ Sci & Technol, Sch Civil Engn, Xiangtan 411201, Peoples R China
[2] Hunan Univ Sci & Technol, Sch Resource Environm & Safety Engn, Xiangtan 411201, Peoples R China
[3] Hunan Univ Sci & Technol, Work Safety Key Lab Prevent & Control Gas & Roof D, Xiangtan 411201, Peoples R China
[4] Hunan Inst Engn, Architectural Engn Inst, Xiangtan 411101, Peoples R China
来源
APPLIED SCIENCES-BASEL | 2023年 / 13卷 / 07期
基金
中国国家自然科学基金;
关键词
mechanical damage; micro mechanism; sudden change loading rate; loading rate; crack propagation; STRENGTH;
D O I
10.3390/app13074354
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
In order to study the influence of sudden change of loading rate on crack propagation and failure mode of rock bridge of fractured rock mass, the specimens used in this paper were rock-like materials containing two prefabricated fractures. The mechanical properties and the failure mode of the specimens under different constant loading rates and sudden changes in loading rate were tested. The photographic monitoring and acoustic emission were carried out at the same time. The results show that: (1) In the process of sudden change loading, the specimen shows the characteristics of approximate elastic deformation, and the stress-strain curve after sudden loading is similar to the corresponding stress-strain curve at the corresponding constant loading rate. (2) Combined with acoustic emission detection, it is found that when the loading rate is not much different before the mutation, the loading rates is the same after the mutation and the stress-strain curve of the specimen is similar. In the low-speed loading stage, the acoustic emission count is generally low, while in the high-speed loading stage, the acoustic emission count is generally high. The sudden change from low-speed loading to high-speed loading easily induces stress drop, resulting in crack generation and increase of acoustic emission count. (3) The rate of the specimen during the crack development period plays a decisive role in the failure mode of the specimen. Before the sudden change of loading rate, the low-speed loading within a certain range has little effect on the specimen. When the high-speed loading is carried out when the stress is low in the early stage of the mutation, the acoustic emission count of the specimen is high, which will cause some damage inside the specimen. As a result, even if the rate is the same after the mutation, the final peak stress and failure mode may be different.
引用
收藏
页数:17
相关论文
共 50 条
  • [41] Experimental study on fracture characteristics of rock-like material with prefabricated cracks under compression shear
    Yuan, Shuang-Xi
    Jiang, Tong
    Lei, Jia-Hua
    Cui, Cheng-Hao
    SCIENTIFIC REPORTS, 2022, 12 (01)
  • [42] Experimental Study on the Crack Initiation and Propagation of Unequal Cracks in Rock-Like Materials
    Chen, Qingfeng
    Huang, Min
    Duan, Jingmin
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2022, 2022
  • [43] Strain-rate effect on mechanical properties of rock-like specimens with narrow crack under uniaxial compression
    Xi, Yanhui
    Dui, Guansuo
    Sun, Zhenyu
    Wei, Dianen
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, 133
  • [44] Characteristics of Crack Growth in Rock-Like Materials under Monotonic and Cyclic Loading Conditions
    Ko, Tae Young
    Lee, Sean Seungwon
    APPLIED SCIENCES-BASEL, 2020, 10 (02):
  • [45] Crack propagation and coalescence of brittle rock-like specimens with pre-existing cracks in compression
    Cao, Ping
    Liu, Taoying
    Pu, Chengzhi
    Lin, Hang
    ENGINEERING GEOLOGY, 2015, 187 : 113 - 121
  • [46] Experimental study on crack propagation of precrack rock-like specimens under hydro-mechanical coupling
    Zhao C.
    Xing J.
    Niu J.
    Ma C.
    Yanshilixue Yu Gongcheng Xuebao/Chinese Journal of Rock Mechanics and Engineering, 2019, 38 : 2823 - 2830
  • [47] Fracture behaviors of multi-crack in rock-like material
    Li, LY
    Che, FX
    Liu, DA
    ADVANCES IN FRACTURE AND FAILURE PREVENTION, PTS 1 AND 2, 2004, 261-263 : 1523 - 1528
  • [48] Crack coalescence in a rock-like material containing two cracks
    Wong, RHC
    Chau, KT
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 1998, 35 (02): : 147 - 164
  • [49] Crack propagation process and acoustic emission characteristics of rock-like specimens with double parallel flaws under uniaxial compression
    Wang, Zhiheng
    Li, Yong
    Cai, Weibing
    Zhu, Weishen
    Kong, Weiqiu
    Dai, Feng
    Wang, Chen
    Wang, Kai
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2021, 114
  • [50] Propagation Mechanism of Neighboring Cracks in Rock-Like Cylindrical Specimens under Uniaxial Compression
    Haeri, H.
    JOURNAL OF MINING SCIENCE, 2015, 51 (03) : 487 - 496