Study on Crack Propagation of Rock Bridge in Rock-like Material with Fractures under Compression Loading with Sudden Change Rate

被引:1
|
作者
Huang, Xuanqi [1 ]
Wan, Wen [1 ,2 ,3 ]
Wang, Min [2 ]
Zhou, Yu [2 ]
Liu, Jie [4 ]
Chen, Wei [4 ]
机构
[1] Hunan Univ Sci & Technol, Sch Civil Engn, Xiangtan 411201, Peoples R China
[2] Hunan Univ Sci & Technol, Sch Resource Environm & Safety Engn, Xiangtan 411201, Peoples R China
[3] Hunan Univ Sci & Technol, Work Safety Key Lab Prevent & Control Gas & Roof D, Xiangtan 411201, Peoples R China
[4] Hunan Inst Engn, Architectural Engn Inst, Xiangtan 411101, Peoples R China
来源
APPLIED SCIENCES-BASEL | 2023年 / 13卷 / 07期
基金
中国国家自然科学基金;
关键词
mechanical damage; micro mechanism; sudden change loading rate; loading rate; crack propagation; STRENGTH;
D O I
10.3390/app13074354
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
In order to study the influence of sudden change of loading rate on crack propagation and failure mode of rock bridge of fractured rock mass, the specimens used in this paper were rock-like materials containing two prefabricated fractures. The mechanical properties and the failure mode of the specimens under different constant loading rates and sudden changes in loading rate were tested. The photographic monitoring and acoustic emission were carried out at the same time. The results show that: (1) In the process of sudden change loading, the specimen shows the characteristics of approximate elastic deformation, and the stress-strain curve after sudden loading is similar to the corresponding stress-strain curve at the corresponding constant loading rate. (2) Combined with acoustic emission detection, it is found that when the loading rate is not much different before the mutation, the loading rates is the same after the mutation and the stress-strain curve of the specimen is similar. In the low-speed loading stage, the acoustic emission count is generally low, while in the high-speed loading stage, the acoustic emission count is generally high. The sudden change from low-speed loading to high-speed loading easily induces stress drop, resulting in crack generation and increase of acoustic emission count. (3) The rate of the specimen during the crack development period plays a decisive role in the failure mode of the specimen. Before the sudden change of loading rate, the low-speed loading within a certain range has little effect on the specimen. When the high-speed loading is carried out when the stress is low in the early stage of the mutation, the acoustic emission count of the specimen is high, which will cause some damage inside the specimen. As a result, even if the rate is the same after the mutation, the final peak stress and failure mode may be different.
引用
收藏
页数:17
相关论文
共 50 条
  • [31] Acoustic Emission and Mechanical Characteristics of Rock-Like Material Containing Single Crack Under Uniaxial Compression
    Li, Kesheng
    Zhao, Zhen
    Ma, Depeng
    Liu, Chuanxiao
    Zhang, Jinpeng
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2022, 47 (04) : 4749 - 4761
  • [32] Experimental and numerical study on crack development characteristics between two cavities in rock-like material under uniaxial compression
    Liu, Bing
    Zhou, Yu
    Gao, Yong-Tao
    Xu, Chaoshui
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2020, 109
  • [33] Experimental Study of the Mechanical Characteristics of a Rock-Like Material Containing a Preexisting Fissure under Loading and Unloading Triaxial Compression
    Xiao, Taoli
    Huang, Mei
    Gao, Min
    ADVANCES IN CIVIL ENGINEERING, 2020, 2020
  • [34] Erratum to: On the Strength and Crack Propagation Process of the Pre-Cracked Rock-Like Specimens Under Uniaxial Compression
    H. Haeri
    K. Shahriar
    M. F. Marji
    P. Moarefvand
    Strength of Materials, 2014, 46 : 301 - 301
  • [35] Laboratory Study on the Propagation of Horizontal Edge Cracks in Rock-like Material
    Zhang, Baoliang
    Shen, Baotang
    Chen, Shaojie
    Sun, Xizhen
    PROCEEDINGS OF THE 9TH CHINA-RUSSIA SYMPOSIUM COAL IN THE 21ST CENTURY: MINING, INTELLIGENT EQUIPMENT AND ENVIRONMENT PROTECTION, 2018, 176 : 63 - 67
  • [37] Crack Initiation, Propagation, and Failure Characteristics of Jointed Rock or Rock-Like Specimens: A Review
    Cao, Ri-hong
    Cao, Ping
    Lin, Hang
    Fan, Xiang
    Zhang, Chunyang
    Liu, Taoying
    ADVANCES IN CIVIL ENGINEERING, 2019, 2019
  • [38] Experimental study on fracture characteristics of rock-like material with prefabricated cracks under compression shear
    Shuang-Xi Yuan
    Tong Jiang
    Jia-Hua Lei
    Cheng-Hao Cui
    Scientific Reports, 12
  • [39] Crack coalescence between two non-parallel flaws in rock-like material under uniaxial compression
    Zhang, Xiao-Ping
    Liu, Quansheng
    Wu, Shunchuan
    Tang, Xuhai
    ENGINEERING GEOLOGY, 2015, 199 : 74 - 90
  • [40] Research on the Propagation Pattern of 3-D Initial Crack in Rock-like Material under Uniaxial Tension
    Yang, L.
    Jiang, Y.
    Li, S.
    Li, B.
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS IX, 2011, 452-453 : 817 - +