Study on Crack Propagation of Rock Bridge in Rock-like Material with Fractures under Compression Loading with Sudden Change Rate

被引:1
|
作者
Huang, Xuanqi [1 ]
Wan, Wen [1 ,2 ,3 ]
Wang, Min [2 ]
Zhou, Yu [2 ]
Liu, Jie [4 ]
Chen, Wei [4 ]
机构
[1] Hunan Univ Sci & Technol, Sch Civil Engn, Xiangtan 411201, Peoples R China
[2] Hunan Univ Sci & Technol, Sch Resource Environm & Safety Engn, Xiangtan 411201, Peoples R China
[3] Hunan Univ Sci & Technol, Work Safety Key Lab Prevent & Control Gas & Roof D, Xiangtan 411201, Peoples R China
[4] Hunan Inst Engn, Architectural Engn Inst, Xiangtan 411101, Peoples R China
来源
APPLIED SCIENCES-BASEL | 2023年 / 13卷 / 07期
基金
中国国家自然科学基金;
关键词
mechanical damage; micro mechanism; sudden change loading rate; loading rate; crack propagation; STRENGTH;
D O I
10.3390/app13074354
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
In order to study the influence of sudden change of loading rate on crack propagation and failure mode of rock bridge of fractured rock mass, the specimens used in this paper were rock-like materials containing two prefabricated fractures. The mechanical properties and the failure mode of the specimens under different constant loading rates and sudden changes in loading rate were tested. The photographic monitoring and acoustic emission were carried out at the same time. The results show that: (1) In the process of sudden change loading, the specimen shows the characteristics of approximate elastic deformation, and the stress-strain curve after sudden loading is similar to the corresponding stress-strain curve at the corresponding constant loading rate. (2) Combined with acoustic emission detection, it is found that when the loading rate is not much different before the mutation, the loading rates is the same after the mutation and the stress-strain curve of the specimen is similar. In the low-speed loading stage, the acoustic emission count is generally low, while in the high-speed loading stage, the acoustic emission count is generally high. The sudden change from low-speed loading to high-speed loading easily induces stress drop, resulting in crack generation and increase of acoustic emission count. (3) The rate of the specimen during the crack development period plays a decisive role in the failure mode of the specimen. Before the sudden change of loading rate, the low-speed loading within a certain range has little effect on the specimen. When the high-speed loading is carried out when the stress is low in the early stage of the mutation, the acoustic emission count of the specimen is high, which will cause some damage inside the specimen. As a result, even if the rate is the same after the mutation, the final peak stress and failure mode may be different.
引用
收藏
页数:17
相关论文
共 50 条
  • [21] The Effects of Crack Openings on Crack Initiation, Propagation and Coalescence Behavior in Rock-Like Materials Under Uniaxial Compression
    Hao Cheng
    Xiaoping Zhou
    Jiang Zhu
    Qihu Qian
    Rock Mechanics and Rock Engineering, 2016, 49 : 3481 - 3494
  • [22] The Effects of Crack Openings on Crack Initiation, Propagation and Coalescence Behavior in Rock-Like Materials Under Uniaxial Compression
    Cheng, Hao
    Zhou, Xiaoping
    Zhu, Jiang
    Qian, Qihu
    ROCK MECHANICS AND ROCK ENGINEERING, 2016, 49 (09) : 3481 - 3494
  • [23] Experimental Study of the Crack Predominance of Rock-Like Material Containing Parallel Double Fissures under Uniaxial Compression
    Chen, Wei
    Wan, Wen
    Zhao, Yanlin
    Peng, Wenqing
    SUSTAINABILITY, 2020, 12 (12)
  • [24] Non-parallel double-crack propagation in rock-like materials under uniaxial compression
    Weidong Pan
    Xin Wang
    Qiming Liu
    Yongkang Yuan
    Baodong Zuo
    International Journal of Coal Science & Technology, 2019, 6 : 372 - 387
  • [25] On the Strength and Crack Propagation Process of the Pre-Cracked Rock-Like Specimens under Uniaxial Compression
    Haeri, H.
    Shahriar, K.
    Marji, M. F.
    Moarefvand, P.
    STRENGTH OF MATERIALS, 2014, 46 (01) : 140 - 152
  • [26] On the Strength and Crack Propagation Process of the Pre-Cracked Rock-Like Specimens under Uniaxial Compression
    H. Haeri
    K. Shahriar
    M. F. Marji
    P. Moarefvand
    Strength of Materials, 2014, 46 : 140 - 152
  • [27] Non-parallel double-crack propagation in rock-like materials under uniaxial compression
    Pan, Weidong
    Wang, Xin
    Liu, Qiming
    Yuan, Yongkang
    Zuo, Baodong
    INTERNATIONAL JOURNAL OF COAL SCIENCE & TECHNOLOGY, 2019, 6 (03) : 372 - 387
  • [28] Acoustic Emission and Mechanical Characteristics of Rock-Like Material Containing Single Crack Under Uniaxial Compression
    Kesheng Li
    Zhen Zhao
    Depeng Ma
    Chuanxiao Liu
    Jinpeng Zhang
    Arabian Journal for Science and Engineering, 2022, 47 : 4749 - 4761
  • [29] Experimental study on rock-like material with pre-cracks under uniaxial compression
    School of Energy and Safety, Hunan University of Science and Technology, Xiangtan 411201, China
    不详
    Electron. J. Geotech. Eng., 2013, (1775-1786):
  • [30] Experimental and numerical investigation on crack mechanism of folded flawed rock-like material under uniaxial compression
    Fan, Wenchen
    Yang, Hui
    Jiang, Xueliang
    Cao, Ping
    ENGINEERING GEOLOGY, 2021, 291