Switchable FSS-based 3D Printed Radome using Diodes at 3.6 GHz

被引：0

作者：

Le Dam, T. H. ^{[1
]}

Niembro-Martin, Alejandro ^{[2
]}

Lacrevaz, Thierry ^{[1
]}

Houzet, Gregory ^{[1
]}

Paulet, Damien ^{[3
]}

Reverdy-Bruas, Nadege ^{[4
]}

Duong, Q. Bao ^{[5
]}

Vuong, T. Phu ^{[1
]}

机构：

[1] Univ Savoie Mt Blanc, Univ Grenoble Alpes, CNRS, Grenoble INP,IMEP LAHC, Grenoble, France

[2] Schneider Elect, Rueil Malmaison, France

[3] Univ Grenoble Alpes, CNRS, Grenoble INP, IUT1, Grenoble, France

[4] Univ Grenoble Alpes, CNRS, Grenoble INP, LGP2, Grenoble, France

[5] Univ Grenoble Alpes, S Mart Grenoble Alpes, Grenoble, France

来源：

2023 53RD EUROPEAN MICROWAVE CONFERENCE, EUMC | 2023年

关键词：

printed radome; jetting; FSS; 3.6; GHz; radiation pattern; diode;

D O I：

10.23919/EuMC58039.2023.10290381

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

We present a switchable FSS-based printed radome using p-i-n diodes that allows controlling the radiation pattern of a patch antenna at 3.6 GHz. The jetting technology is employed to print the FSS pattern onto the surface of the plastic hemisphere-based radome. Subsequently, p-i-n diodes are mounted onto the radome surface to connect adjacent FSS unit cells. By controlling the bias of these diodes, the printed radome properties are controlled. Consequently, the radiation pattern of the antenna-radome system can be dynamically adjusted.

引用

页码：416 / 419

页数：4

共 50 条

[41] Predictable 3D guided adhesive bonding of porcelain veneers using 3D printed trays
Silva, Bruno Pereira
Arteaga, Gustavo Mahn
Mahn, Eduardo
JOURNAL OF ESTHETIC AND RESTORATIVE DENTISTRY, 2021, 33 (05) : 692 - 701
[42] Assessment of dimensional accuracy of 3D printed part using resin 3D printing technique
Dhanunjayarao, B. N.
Naidu, N. V. Swamy
MATERIALS TODAY-PROCEEDINGS, 2022, 59 : 1608 - 1614
[43] Performance Comparison of Simple and Low Cost Metallization Techniques for 3D Printed Antennas at 10 GHz and 30 GHz
Alkaraki, Shaker
Gao, Yue
Torrico, Max O. Munoz
Stremsdoerfer, Samuel
Gayets, Edouard
Parini, Clive
IEEE ACCESS, 2018, 6 : 64261 - 64269
[44] 3D printed stents using Fused deposition modelling
Khalaj, Roxanne
Tabriz, Atabak Ghanizadeh
Junqueira, Laura Andrade
Okereke, Michael I.
Douroumis, Dennis
JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY, 2024, 97
[45] Using 3D printed molecules for teaching inorganic chemistry
Scalfani, Vincent F.
Vaid, Thomas P.
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2014, 247
[46] Smart Textile Using 3D Printed Conductive Sequins
Ma, Hua
Yamaoka, Junichi
TEI'22: PROCEEDINGS OF THE SIXTEENTH INTERNATIONAL CONFERENCE ON TANGIBLE, EMBEDDED, AND EMBODIED INTERACTION, 2022,
[47] Chemical analysis using 3D printed glass microfluidics
Gal-Or, Eran
Gershoni, Yaniv
Scotti, Gianmario
Nilsson, Sofia M. E.
Saarinen, Jukka
Jokinen, Ville
Strachan, Clare J.
af Gennas, Gustav Boije
Yli-Kauhaluoma, Jari
Kotiaho, Tapio
ANALYTICAL METHODS, 2019, 11 (13) : 1802 - 1810
[48] Concentration of lambda concatemers using a 3D printed device
Rau, Samantha
Huynh, Thi
Larsen, Alex
Kounovsky-Shafer, Kristy L.
ELECTROPHORESIS, 2023, 44 (7-8) : 744 - 751
[49] Guidelines for 3D printed springs using material extrusion
Enea, Sacco
Moon, Seung Ki
RAPID PROTOTYPING JOURNAL, 2022, 28 (03) : 409 - 427
[50] Fabrication of Terahertz Components using 3D Printed Templates
Byford, Jennifer A.
Purtill, Zachary
Chahal, Premjeet
2016 IEEE 66TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2016, : 817 - 822

← 1 2 3 4 5 →