Fabrication of Terahertz Components using 3D Printed Templates

被引：6
|
作者：
Byford, Jennifer A. [1 ]
Purtill, Zachary [1 ]
Chahal, Premjeet [1 ]
机构：
[1] Michigan State Univ, Dept Elect Engn, E Lansing, MI 48824 USA
来源：
2016 IEEE 66TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC) | 2016年
关键词：
terahertz; fabrication; 3D printing; WAVE-GUIDE; MILLIMETER-WAVE;
D O I：
10.1109/ECTC.2016.193
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A new fabrication process for passive terahertz components is introduced. Molds are 3D printed on a commercially available 3D printer using rigid opaque material Vero White. An injection molding machine is used to melt low density polyethylene (LDPE) and high density polyethelene (HDPE) pellets to fill the molds. Sample components are designed in ANSYS HFSS (R) and fabricated using the new process including a set of lenses, various dielectric ridge waveguides, a photonic crystal filter, and probes. Samples are then measured using a frequency domain terahertz system and compared to their expected performance from simulation.
引用
收藏
页码：817 / 822
页数：6
相关论文
共 50 条
  • [1] PDMS lab-on-a-chip fabrication using 3D printed templates
    Comina, German
    Suska, Anke
    Filippini, Daniel
    [J]. LAB ON A CHIP, 2014, 14 (02) : 424 - 430
  • [2] Affordable Terahertz Components using 3D Printing
    Kaur, Amanpreet
    Myers, Joshua C.
    Ghazali, Mohd Ifwat Mohd
    Byford, Jennifer
    Chahal, Premjeet
    [J]. 2015 IEEE 65TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2015, : 2071 - 2076
  • [3] 3D printed templates for steering of needles
    Lindegaard, J. C.
    Petric, P.
    Hansen, A. Traberg
    Nielsen, S. Kynde
    Meisner, B.
    Tanderup, K.
    Fokdal, L. U.
    [J]. RADIOTHERAPY AND ONCOLOGY, 2019, 133 : S63 - S63
  • [4] Porous Geopolymer Components through Inverse Replica of 3D Printed Sacrificial Templates
    Franchin, G.
    Colombo, P.
    [J]. JOURNAL OF CERAMIC SCIENCE AND TECHNOLOGY, 2015, 6 (02): : 105 - 111
  • [5] Tunable metallic nanostructures using 3D printed nanosphere templates
    Jose, Bincy
    Vijayaraghavan, Rajani K.
    Kent, Lorcan
    O'Toole, Sharon
    O'Leary, John
    Forster, Robert J.
    [J]. ELECTROCHEMISTRY COMMUNICATIONS, 2019, 98 : 106 - 109
  • [6] 3D printed diffractive terahertz lenses
    Furlan, Walter D.
    Ferrando, Vicente
    Monsoriu, Juan A.
    Zagrajek, Przemyslaw
    Czerwinska, Bieta
    Szustakowski, Mieczyslaw
    [J]. OPTICS LETTERS, 2016, 41 (08) : 1748 - 1751
  • [7] Flexible Holographic Fabrication of 3D Photonic Crystal Templates with Polarization Control through a 3D Printed Reflective Optical Element
    Lowell, David
    George, David
    Lutkenhaus, Jeffrey
    Tian, Chris
    Adewole, Murthada
    Philipose, Usha
    Zhang, Hualiang
    Lin, Yuankun
    [J]. MICROMACHINES, 2016, 7 (07)
  • [8] Fabrication of Topology Optimized Concrete Components Utilizing 3D Printed Clay Mould
    Wang, Sihan
    Huang, Kunsheng
    Huang, Zixun
    Sodano, Michele
    Xu, Weishun
    Raspall, Felix
    [J]. IASS 60TH ANNIVERSARY SYMPOSIUM (IASS SYMPOSIUM 2019) - 9TH INTERNATIONAL CONFERENCE ON TEXTILE COMPOSITES AND INFLATABLE STRUCTURES (STRUCTURAL MEMBRANES 2019), 2019, : 1263 - 1269
  • [9] Design and Fabrication of Industrial Components Using 3D Printing
    Sathish, T.
    Vijayakumar, M. D.
    Ayyangar, Anshumaan Krishnan
    [J]. MATERIALS TODAY-PROCEEDINGS, 2018, 5 (06) : 14489 - 14498
  • [10] 3D Nanophotonic device fabrication using discrete components
    Melzer, Jeffrey E.
    McLeod, Euan
    [J]. NANOPHOTONICS, 2020, 9 (06) : 1373 - 1390
12345