Switchable FSS-based 3D Printed Radome using Diodes at 3.6 GHz

被引：0

作者：

Le Dam, T. H. ^{[1
]}

Niembro-Martin, Alejandro ^{[2
]}

Lacrevaz, Thierry ^{[1
]}

Houzet, Gregory ^{[1
]}

Paulet, Damien ^{[3
]}

Reverdy-Bruas, Nadege ^{[4
]}

Duong, Q. Bao ^{[5
]}

Vuong, T. Phu ^{[1
]}

机构：

[1] Univ Savoie Mt Blanc, Univ Grenoble Alpes, CNRS, Grenoble INP,IMEP LAHC, Grenoble, France

[2] Schneider Elect, Rueil Malmaison, France

[3] Univ Grenoble Alpes, CNRS, Grenoble INP, IUT1, Grenoble, France

[4] Univ Grenoble Alpes, CNRS, Grenoble INP, LGP2, Grenoble, France

[5] Univ Grenoble Alpes, S Mart Grenoble Alpes, Grenoble, France

来源：

2023 53RD EUROPEAN MICROWAVE CONFERENCE, EUMC | 2023年

关键词：

printed radome; jetting; FSS; 3.6; GHz; radiation pattern; diode;

D O I：

10.23919/EuMC58039.2023.10290381

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

We present a switchable FSS-based printed radome using p-i-n diodes that allows controlling the radiation pattern of a patch antenna at 3.6 GHz. The jetting technology is employed to print the FSS pattern onto the surface of the plastic hemisphere-based radome. Subsequently, p-i-n diodes are mounted onto the radome surface to connect adjacent FSS unit cells. By controlling the bias of these diodes, the printed radome properties are controlled. Consequently, the radiation pattern of the antenna-radome system can be dynamically adjusted.

引用

页码：416 / 419

页数：4

共 50 条

[31] Terahertz Imaging System based on Bessel Beams via 3D Printed axicons at 100GHz
Liu, Changming
Wei, Xuli
Zhang, Zhongqi
Wang, Kejia
Yang, Zhengang
Liu, Jinsong
INFRARED, MILLIMETER-WAVE, AND TERAHERTZ TECHNOLOGIES III, 2014, 9275
[32] 3D Printed Ferrofluid Based Soft Actuators
Keneth, Ela Sachyani
Epstein, Alexander R.
Harari, Michal Soreni
St Pierre, Ryan
Magdassi, Shlomo
Bergbreiter, Sarah
2019 INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION (ICRA), 2019, : 7569 - 7574
[33] 3D printed cellulose based product applications
Firmanda, Afrinal
Syamsu, Khaswar
Sari, Yessie Widya
Cabral, Jaydee
Pletzer, Daniel
Mahadik, Bhushan
Fisher, John
Fahma, Farah
MATERIALS CHEMISTRY FRONTIERS, 2022, 6 (03) : 254 - 279
[34] Design of 3D Wireless Power Transfer System Based on 3D Printed Electronics
Hou, Tao
Xu, Jun
Elkhuizen, Willemijn S.
Wang, Charlie C. L.
Jiang, Jiehui
Geraedts, Jo M. P.
Song, Yu
IEEE ACCESS, 2019, 7 : 94793 - 94805
[35] Analysis and Design of Dual-Wide Band (28/38 GHz) Chebyshev Linear Antenna Array Integrated with 3D Printed Radome for 5G Applications
Khairy A.
Elboushi A.
Shaalan A.A.
Ahmed M.F.
Progress In Electromagnetics Research C, 2023, 131 : 259 - 273
[36] Using a 3D Printed Microscope For Assessing Liquid Based Cervical Cytology Specimens
Rosen, Daniel
Arbab, Farinaz
Ramani, Nisha
MODERN PATHOLOGY, 2022, 35 (SUPPL 2) : 1092 - 1093
[37] Using a 3D Printed Microscope For Assessing Liquid Based Cervical Cytology Specimens
Rosen, Daniel
Arbab, Farinaz
Ramani, Nisha
LABORATORY INVESTIGATION, 2022, 102 (SUPPL 1) : 1092 - 1093
[38] Enhancing 5G antenna performance by using 3D FSS structures
Guidoum, Ferial
Tounsi, Mohamed Lamine
Vuong, Tan-Phu
Ababou, Noureddine
Yagoub, Mustapha C. E.
INTERNATIONAL JOURNAL OF RF AND MICROWAVE COMPUTER-AIDED ENGINEERING, 2021, 31 (08)
[39] Optimization of 3D printed truss meta-structure for structural performance and switchable vibration attenuation
Kim, Samuel
Hong, Hyunsoo
Jeong, Jaemoon
Kim, Wonvin
Kim, Wonki
Sim, Gyumin
Lee, Jieun
Kim, Seong Su
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2025, 193
[40] Assessing warping issues with 3D printed ceramic models using SLA 3D printers
Rodriguez, Leslie
Ruzycki, Nancy
ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2019, 257

← 1 2 3 4 5 →