Effect of RE on molybdenum partitioning and resultant mechanical and microstructural behavior of a duplex stainless steel during hot working condition

被引:0
|
作者
陈雷 [1 ,2 ]
马筱聪 [2 ]
王明家 [3 ]
薛红燕 [1 ,2 ]
机构
[1] National Engineering Research Center for Equipment and Technology of Cold Strip Rolling,Yanshan University
[2] School of Mechanical Engineering, Yanshan University
[3] State Key Laboratory of Metastable Materials Science and Technology, Yanshan University
基金
中国国家自然科学基金;
关键词
duplex stainless steel; rare earths; partitioning; hot working;
D O I
暂无
中图分类号
TG142.71 [不锈钢、耐酸钢];
学科分类号
080502 ;
摘要
The effect of rare earth(RE) on Mo partitioning and resultant mechanical and microstructural behavior of a duplex stainless steel during hot working condition was investigated. It was found that RE effect was sensitive to temperature. At the high temperature, the development of dynamic recovery(DRV) in α phase was slowed down while the dynamic recrystallization(DRX) process in γ phase was accelerated by RE, whereby both work hardening rate(at low strain) and dynamic softening rate(at high strain) increased and moreover, the discrepancy on the hardness of the both phase reduced. Whereas at the low temperature, the effect of RE was opposite as compared with those in the high temperature. Mo partitioning analysis by EPMA indicated that RE enhanced the partitioning of Mo in α phase while reduced Mo concentration in γ phase at higher temperature whereby the mismatch between two phases could be improved indicated by the elimination of voids and cracks at α/γ interface, but it was contrary to that at the low temperature. Mo partitioning was believed to be an important cause for the RE effect on the differences of mechanical and microstructural behavior. Also this result provided a reasonable evidence for micro-alloying of RE in DSSs.
引用
下载
收藏
页码:107 / 112
页数:6
相关论文
共 50 条
  • [21] Influence of hot working on microstructure and mechanical behavior of high nitrogen stainless steel
    Cheng-miao Hong
    Jie Shi
    Li-yuan Sheng
    Wen-quan Cao
    Wei-jun Hui
    Han Dong
    Journal of Materials Science, 2011, 46 : 5097 - 5103
  • [22] Influence of hot working on microstructure and mechanical behavior of high nitrogen stainless steel
    Hong, Cheng-miao
    Shi, Jie
    Sheng, Li-yuan
    Cao, Wen-quan
    Hui, Wei-jun
    Dong, Han
    JOURNAL OF MATERIALS SCIENCE, 2011, 46 (15) : 5097 - 5103
  • [23] BEHAVIOR OF NONMETALLIC INCLUSIONS DURING HOT MECHANICAL WORKING OF STEEL
    TSIVIRKO, EI
    GONTARENKO, VI
    BYALIK, GA
    STEEL IN TRANSLATION, 1992, 22 (02) : 77 - 79
  • [24] Partitioning behavior of N and its effect on hot deformation behavior of duplex stainless steels 2101 and 2205
    Li, Wang
    Feng, Zhihui
    Gu, Jinbo
    Cao, Zhu
    Mu, Wangzhong
    Li, Jingyuan
    JOURNAL OF MATERIALS SCIENCE, 2022, 57 (48) : 22119 - 22139
  • [25] Partitioning behavior of N and its effect on hot deformation behavior of duplex stainless steels 2101 and 2205
    Wang Li
    Zhihui Feng
    Jinbo Gu
    Zhu Cao
    Wangzhong Mu
    Jingyuan Li
    Journal of Materials Science, 2022, 57 : 22119 - 22139
  • [26] Microstructural features and mechanical behavior of duplex stainless steel/low carbon steel friction stir dissimilar weld
    Ansari, Reza
    Movahedi, Mojtaba
    Pouranvari, Majid
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 25 : 5352 - 5371
  • [27] Interfacial healing behavior of 2507 duplex stainless steel during hot compression bonding
    Li, Chuanzong
    Yu, Zhiyuan
    Lu, Hao
    MATERIALS LETTERS, 2022, 327
  • [28] Microstructural changes during heating of super duplex stainless steel and its thermal deformation behavior
    ZHOU Candong
    AO Ying
    LIU Xiaorong
    Baosteel Technical Research, 2017, 11 (04) : 22 - 33
  • [29] Dynamic Recrystallization Behavior of 13%Cr Martensitic Stainless Steel under Hot Working Condition
    G.R.Ebrahimi
    H.Keshmiri
    A.R.Maldar
    A.Momeni
    Journal of Materials Science & Technology, 2012, 28 (05) : 467 - 473
  • [30] Dynamic Recrystallization Behavior of 13%Cr Martensitic Stainless Steel under Hot Working Condition
    Ebrahimi, G. R.
    Keshmiri, H.
    Maldar, A. R.
    Momeni, A.
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2012, 28 (05) : 467 - 473