Effects of rare earth elements on microstructure and tensile properties of Al-Si-Cu alloy at 250℃

被引:3
|
作者
Shuai-bo Zhang [1 ]
Yong Su [1 ]
Wen-gang Gong [1 ]
机构
[1] School of Materials Science and Engineering, Hefei University of Technology
关键词
D O I
暂无
中图分类号
TG146.21 [];
学科分类号
080502 ;
摘要
The effects of rare earth elements (La,Sm) on the high-temperature (250 °C) microstructure and mechanical properties of Al-Si-Cu alloys were analyzed.The experimental results show that with the addition of La and Sm,the α-Al was significantly refined,and the eutectic Si changed from acicular to rod-like and granular.XRD and SEM analysis shows that the rare earth phases in the alloy were mainly AlSiRe and AlRe.Fracture morphology observations show the fracture mode of the alloy changes from brittle and ductile fracture to ductile fracture.With the increase of La or Sm contents,the mechanical properties of the alloys at 250 °C increase at first,and then decrease.When the contents of La and Sm are 0.4wt.% and 0.2wt.%,the tensile strength of the alloy reaches maximum of 143.91 MPa and 201.48 MPa,respectively.
引用
收藏
页码:474 / 480
页数:7
相关论文
共 50 条
  • [41] Microstructure and Tensile Properties of a Cast Eutectic Al–Si–Cu Alloy Modified by Zr and V
    Jianbo Sun
    Guangkai Zeng
    Dewang Rao
    Yuchen Wang
    Yiwang Yang
    Liwen Pan
    Zhiliu Hu
    Metals and Materials International, 2021, 27 : 5436 - 5449
  • [43] Effects of adding Mg and Cu elements on microstructure and mechanical properties of Al-Fe-V-Si alloy
    Zhang, Lin-Lin
    Xiao, Yu-De
    Zhou, Juan
    Li, Wen-Xian
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2006, 16 (05): : 874 - 880
  • [44] Influences of pouring temperature and cooling rate on microstructure and mechanical properties of casting Al-Si-Cu aluminum alloy
    Hu, Xiaowu
    Ai, Fanrong
    Yan, Hong
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2012, 25 (04) : 272 - 278
  • [45] Hot tensile deformation and fracture behavior of friction stir processed Al-Si-Cu alloy
    Golafshani, Kamran Babapour
    Nourouzi, Salman
    Aval, Hamed Jamshidi
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2021, 35 : 41 - 52
  • [46] IMPACT PROPERTIES OF AL-SI-CU ALLOYS
    SHIVKUMAR, S
    WANG, L
    KELLER, C
    ZEITSCHRIFT FUR METALLKUNDE, 1994, 85 (06): : 394 - 399
  • [47] Effect of trace elements on β-Al5FeSi characteristics, porosity and tensile properties of Al-Si-Cu (319) cast alloys
    Samuel, AM
    Samuel, FH
    Villeneuve, C
    Doty, HW
    Valtierra, S
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2001, 14 (02) : 97 - 120
  • [48] Effects of Cu and La on microstructure and properties of Al-12.6Si alloy
    Gao, B. (gaob@smm.neu.edu.cn), 1603, Northeast University (33):
  • [49] Hot tensile deformation and fracture behavior of friction stir processed Al-Si-Cu alloy
    Babapour Golafshani, Kamran
    Nourouzi, Salman
    Jamshidi Aval, Hamed
    CIRP Journal of Manufacturing Science and Technology, 2021, 35 : 41 - 52
  • [50] Effect of rare earth Eu on microstructure and properties of Al-Mg-Si-Fe alloy
    Chen, Haiyan
    Pan, Meishi
    Deng, Quanwei
    Long, Xie
    Huang, Xiaohan
    Wang, Chao
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2025, 53 (02): : 160 - 166