Effects of rare earth elements on microstructure and tensile properties of Al-Si-Cu alloy at 250℃

被引:3
|
作者
Shuai-bo Zhang [1 ]
Yong Su [1 ]
Wen-gang Gong [1 ]
机构
[1] School of Materials Science and Engineering, Hefei University of Technology
关键词
D O I
暂无
中图分类号
TG146.21 [];
学科分类号
080502 ;
摘要
The effects of rare earth elements (La,Sm) on the high-temperature (250 °C) microstructure and mechanical properties of Al-Si-Cu alloys were analyzed.The experimental results show that with the addition of La and Sm,the α-Al was significantly refined,and the eutectic Si changed from acicular to rod-like and granular.XRD and SEM analysis shows that the rare earth phases in the alloy were mainly AlSiRe and AlRe.Fracture morphology observations show the fracture mode of the alloy changes from brittle and ductile fracture to ductile fracture.With the increase of La or Sm contents,the mechanical properties of the alloys at 250 °C increase at first,and then decrease.When the contents of La and Sm are 0.4wt.% and 0.2wt.%,the tensile strength of the alloy reaches maximum of 143.91 MPa and 201.48 MPa,respectively.
引用
收藏
页码:474 / 480
页数:7
相关论文
共 50 条
  • [21] Microstructure and properties of diffusion brazed aluminum/copper joint with Al-Si-Cu alloy powder
    Nan, Shuiping
    Huang, Jihua
    Chen, Shuhai
    Zhao, Xingke
    Wang, Qi
    Li, Dehua
    Hanjie Xuebao/Transactions of the China Welding Institution, 2014, 35 (01): : 79 - 82
  • [22] Influence of solutionising and aging temperatures on microstructure and mechanical properties of cast Al-Si-Cu alloy
    Haro, S.
    Ramirez, J.
    Dwivedi, D. K.
    Martinez, E.
    MATERIALS SCIENCE AND TECHNOLOGY, 2009, 25 (07) : 886 - 891
  • [23] Effects of multi-modification of rare earth oxides PrxOy and LaxOy on microstructure and tensile properties of casting Al-Cu alloy
    Xia, Yumei
    Bai, Zhihao
    Qiu, Feng
    Jin, Shenbao
    Jiang, Qichuan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 558 : 602 - 606
  • [24] The effects of Mn additions on the microstructure and mechanical properties of Al-Si-Cu casting alloys
    Hwang, J. Y.
    Doty, H. W.
    Kaufman, M. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 488 (1-2): : 496 - 504
  • [25] Effects of element additions on the microstructure and mechanical properties of Al-Si-Cu filler metals
    石磊
    马志鹏
    张誉喾
    许志武
    周飞
    闫久春
    China Welding, 2016, 25 (03) : 1 - 8
  • [26] Effects of T6 Age Hardening on Microstructure and Mechanical Properties of Al-Si-Cu Cast Aluminium Alloy
    Wiengmoon, Amporn
    Apichai, Pattama
    Pearce, John T. H.
    Chairuangsri, Torranin
    APPLIED PHYSICS AND MATERIAL APPLICATIONS, 2013, 770 : 88 - +
  • [27] The Impact of Major Alloying Elements and Refiner on the SDAS of Al-Si-Cu Alloy
    Djurdievic, Mile
    Pavlovic, Jelena
    Byczynski, Glenn
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2009, 46 (02): : 97 - 114
  • [28] Effects of Rare Earth and Ca Elements Additions on the Microstructure and Tensile Properties of Mg-6Zn-3Al-1Cu Alloys
    Wang, Zhongjun
    Zhu, Jing
    Cheng, Jia
    ADVANCED SCIENCE LETTERS, 2011, 4 (11-12) : 3691 - 3695
  • [29] Microstructure and microhardness evolution of melt-spun Al-Si-Cu alloy
    Emad M. Ahmed
    M. R. Ebrahim
    The European Physical Journal Plus, 129
  • [30] Microstructure and Tensile Properties of Al-Cu-Si Alloy with Different Solidification Pressures
    Ouyang, X. X.
    Zhao, H. D.
    Zhang, K. W.
    Li, Y. Y.
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY XIII, VOL II: MODERN DESIGN THEORY AND METHODOLOGY, MEMS AND NANOTECHNOLOGY, AND MATERIAL SCIENCE AND TECHNOLOGY IN MANUFACTURING, 2009, 628-629 : 593 - 598