Effects of rare earth elements on microstructure and tensile properties of Al-Si-Cu alloy at 250℃

被引:3
|
作者
Shuai-bo Zhang [1 ]
Yong Su [1 ]
Wen-gang Gong [1 ]
机构
[1] School of Materials Science and Engineering, Hefei University of Technology
关键词
D O I
暂无
中图分类号
TG146.21 [];
学科分类号
080502 ;
摘要
The effects of rare earth elements (La,Sm) on the high-temperature (250 °C) microstructure and mechanical properties of Al-Si-Cu alloys were analyzed.The experimental results show that with the addition of La and Sm,the α-Al was significantly refined,and the eutectic Si changed from acicular to rod-like and granular.XRD and SEM analysis shows that the rare earth phases in the alloy were mainly AlSiRe and AlRe.Fracture morphology observations show the fracture mode of the alloy changes from brittle and ductile fracture to ductile fracture.With the increase of La or Sm contents,the mechanical properties of the alloys at 250 °C increase at first,and then decrease.When the contents of La and Sm are 0.4wt.% and 0.2wt.%,the tensile strength of the alloy reaches maximum of 143.91 MPa and 201.48 MPa,respectively.
引用
收藏
页码:474 / 480
页数:7
相关论文
共 50 条
  • [31] Microstructure and microhardness evolution of melt-spun Al-Si-Cu alloy
    Ahmed, Emad M.
    Ebrahim, M. R.
    EUROPEAN PHYSICAL JOURNAL PLUS, 2014, 129 (04): : 1 - 8
  • [32] Fatigue properties and microstructure of Al-Si-Cu system casting alloys
    Kobayashi, T
    Ito, T
    Yao, Q
    Fatahalla, N
    MATERIALS SCIENCE AND TECHNOLOGY, 1999, 15 (09) : 1037 - 1043
  • [33] Modification of Al-Si-Cu cast alloy
    Farkasova, Maria
    Tillova, Eva
    Chalupova, Maria
    FME TRANSACTIONS, 2013, 41 (03): : 210 - 215
  • [34] Effect of Cd micro-addition on microstructure and mechanical properties in ternary Al-Si-Cu alloy
    Cao, Yudong
    Chen, Xiaohua
    Wang, Zidong
    Chen, Kaixuan
    Tang, Weizhong
    Pan, Shiwei
    Yang, Xinghai
    Qin, Junwei
    Li, Shaohua
    Wang, Yanlin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2021, 851
  • [35] Microstructure and mechanical properties of a hypereutectic Al-Si-Cu alloy manufactured by laser powder bed fusion
    Bobel, Andrew
    Kim, Yoojin
    Casalena, Lee
    Maddalena, Roger
    Sachdev, Anil K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 901
  • [36] Synergistic Effects of La and Y on the Microstructure and Mechanical Properties of Cast Al-Si-Cu Alloys
    Shuai, Luming
    Zou, Xiuliang
    Rao, Yuqiang
    Lu, Xiaobin
    Yan, Hong
    MATERIALS, 2022, 15 (20)
  • [37] Effects of rare earth Er addition on microstructure and mechanical properties of hypereutectic Al-20% Si alloy
    Li, Qinglin
    Xia, Tiandong
    Lan, Yefeng
    Li, Pengfei
    Fan, Lu
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 588 : 97 - 102
  • [38] Effect of Samarium Addition on Microstructure and Thermal Conductivity of Al-Si-Cu Aluminum Alloy
    Choi, Jin-Ju
    Kang, Yubin
    Im, Byoungyong
    Lee, Chan-Gi
    Kim, Hangoo
    Park, Kwang Hoon
    Kim, Dae-Guen
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2020, 30 (01): : 31 - 37
  • [39] Effects of Rare Earth Er Additions on Microstructure and Mechanical Properties of an Al-Zn-Mg-Cu Alloy
    Kord, S.
    Alipour, Mohammad
    Siadati, M. H.
    Kord, Masumeh
    Koppad, Praveennath G.
    LIGHT METALS 2018, 2018, : 441 - 449
  • [40] Influence of indirect ultrasonic vibration on the microstructure and mechanical behavior of Al-Si-Cu alloy
    Puga, H.
    Barbosa, J.
    Costa, S.
    Ribeiro, S.
    Pinto, A. M. P.
    Prokic, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 560 : 589 - 595