Characterization of Cu3P phase in Sn3.0Ag0.5Cu0.5P/Cu solder joints

被引：0

作者：

Jian-xun Chen ^{[1
]}

Xing-ke Zhao ^{[1
]}

Xu-chen Zou ^{[1
]}

Ji-hua Huang ^{[1
]}

Hai-chun Hu ^{[1
]}

Hai-lian Luo ^{[1
]}

机构：

[1] School of Materials Science and Engineering,University of Science and Technology Beijing

来源：

InternationalJournalofMineralsMetallurgyandMaterials | 2014年 / 21卷 / 01期

关键词：

lead-free solders; phosphorus; melting temperature; microstructure; thermodynamics;

D O I：

暂无

中图分类号：

TG407 [焊接接头的力学性能及其强度计算];

学科分类号：

摘要：

This article reports the effects of phosphorus addition on the melting behavior,microstructure,and mechanical properties of Sn3.0Ag0.5Cu solder.The melting behavior of the solder alloys was determined by differential scanning calorimetry.The interfacial microstructure and phase composition of solder/Cu joints were studied by scanning electron microscopy and energy dispersive spectrometry.Thermodynamics of Cu-P phase formation at the interface between Sn3.0Ag0.5Cu0.5P solder and the Cu substrate was characterized.The results indicate that P addition into Sn3.0Ag0.5Cu solder can change the microstructure and cause the appearance of rod-like Cu3P phase which is distributed randomly in the solder bulk.The Sn3.0Ag0.5Cu0.5P joint shows a mixture of ductile and brittle fracture after shear testing.Meanwhile,the solidus temperature of Sn3.0Ag0.5Cu solder is slightly enhanced with P addition.

引用

页码：65 / 70

页数：6

共 50 条

[31] Effect of solder volume on shear strength of Sn-3.0Ag-0.5Cu solder and Cu metallization
School of Materials and Engineering, Harbin Institute of Technology, Harbin 150001, China
不详
J. Shanghai Jiaotong Univ. Sci., 2008, SUPPL. (149-152):
[32] Crystal orientation of β-Sn grain in Ni(P)/Sn-0.5Cu/Cu and Ni(P)/Sn-1.8Ag/Cu joints
Seo, Sun-Kyoung
Cho, Moon Gi
Lee, Hyuck Mo
JOURNAL OF MATERIALS RESEARCH, 2010, 25 (10) : 1950 - 1957
[33] Crystal orientation of β-Sn grain in Ni(P)/Sn-0.5Cu/Cu and Ni(P)/Sn-1.8Ag/Cu joints
Sun-Kyoung Seo
Moon Gi Cho
Hyuck Mo Lee
Journal of Materials Research, 2010, 25 : 1950 - 1957
[34] Low cycle fatigue performance of ball grid array structure Cu/Sn-3.0Ag-0.5Cu/Cu solder joints
Qin, H. B.
Li, W. Y.
Zhou, M. B.
Zhang, X. P.
MICROELECTRONICS RELIABILITY, 2014, 54 (12) : 2911 - 2921
[35] Size effect on interfacial reactions of Sn-3.0Ag-0.5Cu solder balls on Cu and Ni-P pads
Huang, M. L.
Yang, F.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2015, 26 (02) : 933 - 942
[36] Growth Behavior of Intermetallic Compounds in Cu/Sn3.0Ag0.5Cu Solder Joints with Different Rates of Cooling
Linmei Yang
Z. F. Zhang
Journal of Electronic Materials, 2015, 44 : 590 - 596
[37] Effect of the Welding Process on the Microstructure and Mechanical Properties of Au/Sn-3.0Ag-0.5Cu/Cu Solder Joints
Zhai, Xinmeng
Chen, Yue
Li, Yuefeng
Zou, Jun
Shi, Mingming
Yang, Bobo
JOURNAL OF ELECTRONIC MATERIALS, 2022, 51 (04) : 1597 - 1607
[38] Size effect on interfacial reactions of Sn–3.0Ag–0.5Cu solder balls on Cu and Ni–P pads
M. L. Huang
F. Yang
Journal of Materials Science: Materials in Electronics, 2015, 26 : 933 - 942
[39] Effect of Microwave Hybrid Heating on Mechanical Properties and Microstructure of Sn3.0Ag0.5Cu/Cu Solder Joints
Idris, S. R. A.
Mazelan, M. N.
INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2023, 20 (03) : 10736 - 10744
[40] Growth Behavior of Intermetallic Compounds in Cu/Sn3.0Ag0.5Cu Solder Joints with Different Rates of Cooling
Yang, Linmei
Zhang, Z. F.
JOURNAL OF ELECTRONIC MATERIALS, 2015, 44 (01) : 590 - 596

← 1 2 3 4 5 →