Characterization of Cu3P phase in Sn3.0Ag0.5Cu0.5P/Cu solder joints

被引：0

作者：

Jian-xun Chen ^{[1
]}

Xing-ke Zhao ^{[1
]}

Xu-chen Zou ^{[1
]}

Ji-hua Huang ^{[1
]}

Hai-chun Hu ^{[1
]}

Hai-lian Luo ^{[1
]}

机构：

[1] School of Materials Science and Engineering,University of Science and Technology Beijing

来源：

InternationalJournalofMineralsMetallurgyandMaterials | 2014年 / 21卷 / 01期

关键词：

lead-free solders; phosphorus; melting temperature; microstructure; thermodynamics;

D O I：

暂无

中图分类号：

TG407 [焊接接头的力学性能及其强度计算];

学科分类号：

摘要：

This article reports the effects of phosphorus addition on the melting behavior,microstructure,and mechanical properties of Sn3.0Ag0.5Cu solder.The melting behavior of the solder alloys was determined by differential scanning calorimetry.The interfacial microstructure and phase composition of solder/Cu joints were studied by scanning electron microscopy and energy dispersive spectrometry.Thermodynamics of Cu-P phase formation at the interface between Sn3.0Ag0.5Cu0.5P solder and the Cu substrate was characterized.The results indicate that P addition into Sn3.0Ag0.5Cu solder can change the microstructure and cause the appearance of rod-like Cu3P phase which is distributed randomly in the solder bulk.The Sn3.0Ag0.5Cu0.5P joint shows a mixture of ductile and brittle fracture after shear testing.Meanwhile,the solidus temperature of Sn3.0Ag0.5Cu solder is slightly enhanced with P addition.

引用

页码：65 / 70

页数：6

共 50 条

[21] Fabrication and characterization of Sn-3.0Ag-0.5Cu, Sn-0.7Cu and Sn-0.3Ag-0.5Cu alloys
Lee, Jung-Il
Paeng, Jong Min
Cho, Hyun Su
Yang, Su Min
Ryu, Jeong Ho
JOURNAL OF THE KOREAN CRYSTAL GROWTH AND CRYSTAL TECHNOLOGY, 2018, 28 (03): : 130 - 134
[22] Tensile fracture behavior of Sn-3.0Ag-0.5Cu solder joints on copper
Ju, Guo-kui
Wei, Xi-cheng
Peng, Sun
Liu, Johan
HDP'07: PROCEEDINGS OF THE 2007 INTERNATIONAL SYMPOSIUM ON HIGH DENSITY PACKAGING AND MICROSYSTEM INTEGRATION, 2007, : 306 - +
[23] Effects of solder ball size and reflow cycles on properties of Sn-3.0Ag-0.5Cu/Cu joints
Eun-Chae Noh
Young-Jin Seo
Jeong-Won Yoon
Journal of Materials Science: Materials in Electronics, 2023, 34
[24] Effects of solder ball size and reflow cycles on properties of Sn-3.0Ag-0.5Cu/Cu joints
Noh, Eun-Chae
Seo, Young-Jin
Yoon, Jeong-Won
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2023, 34 (33)
[25] Influence of temperature and strain on phase growth process in Sn-3.0Ag-0.5Cu solder joints
Mori, Takao
Ejiri, Yasuhiro
Sayama, Toshihiko
Talayanagi, Takeshi
Okamoto, Yoshiyuki
Yu, Qiang
2008 11TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS, VOLS 1-3, 2008, : 652 - +
[26] The tensile impact properties of aged Sn-3Ag-0.5Cu/Cu solder joints
Van Luong Nguyen
Chung, Chin-Sung
Kim, Ho-Kyung
MICROELECTRONICS RELIABILITY, 2015, 55 (12) : 2808 - 2816
[27] The Effects of Cu Nanoparticles addition in Sn3.0Ag-0.5Cu Solder Paste on the Microstructure and Shear Strength of the Solder Joints
Liu, Ping
Gu, Xiaolong
Fu, Haifeng
Liu, Yang
2016 17TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2016, : 852 - 855
[28] Microstructure and properties of Sn1.0Ag0.5Cu and Sn3.0Ag0.5Cu lead-free solder
School of Mechanical and Electrical Engineering, Jiangsu Normal University, Xuzhou
221116, China
不详
450001, China
Xiyou Jinshu, 7 (589-593):
[29] Effect of Cu6Sn5 nanoparticles addition on properties of Sn3.0Ag0.5Cu solder joints
Ziwen Lv
Jintao Wang
Fengyi Wang
Weiwei Zhang
Jianqiang Wang
Chunjin Hang
Hongtao Chen
Journal of Materials Science: Materials in Electronics, 2023, 34
[30] Effect of Cu6Sn5 nanoparticles addition on properties of Sn3.0Ag0.5Cu solder joints
Lv, Ziwen
Wang, Jintao
Wang, Fengyi
Zhang, Weiwei
Wang, Jianqiang
Hang, Chunjin
Chen, Hongtao
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2023, 34 (08)

← 1 2 3 4 5 →