Temperature stable SAW devices using directly bonded LiTaO3/glass substrates

被引：0

作者：

Sato, H. ^{[1
]}

Onishi, K. ^{[1
]}

Shimamura, T. ^{[1
]}

Tomita, Y. ^{[1
]}

机构：

[1] Matsushita Electric Industrial Co, Ltd, Osaka, Japan

来源：

Proceedings of the IEEE Ultrasonics Symposium | 1998年 / 1卷

关键词：

Bonding - Glass - Lithium compounds - Piezoelectric materials - Single crystals - Thermal expansion - Thermal stress - Thermodynamic stability - Ultrasonic transmission - Ultrasonic velocity;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Temperature-stable surface acoustic wave (SAW) devices were fabricated using a stacking procedure based on the direct bonding of a piezoelectric single crystal LiTaO3 layer on a glass substrates. The piezoelectric layer experienced thermal stress due to the smaller thermal expansion coefficient (TEC) of the glass substrate. By using a glass substrate with small TEC and minimizing the LiTaO3/glass thickness ratio, the temperature coefficient of frequency of the SAW devices was maintained at approximately -6 ppm/°C from -30 °C to 80 °C.

引用

页码：335 / 338

共 50 条

[1] Temperature stable SAW devices using directly bonded LiTaO3/glass substrates
Sato, H
Onishi, K
Shimamura, T
Tomita, Y
1998 IEEE ULTRASONICS SYMPOSIUM - PROCEEDINGS, VOLS 1 AND 2, 1998, : 335 - 338
[2] Temperature compensated SAW devices using bonded LiTaO3/sapphire
Fujitsu Laboratories Ltd., 64 Nishiwaki, Ohkubo-cho, Akashi Hyogo 674-8555, Japan
不详
不详
不详
IEEJ Trans. Electron. Inf. Syst., 2007, 8 (1161-1165+4):
[3] SAW VELOCITY VARIATION OF LITAO3 SUBSTRATES
SATO, M
IWAMA, A
YAMADA, J
HIKITA, M
FURUKAWA, Y
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1989, 28 : 111 - 113
[4] DLC films on LiTaO3 for SAW devices
Meunier, C
Munnik, F
Germann, E
Schluechter, R
Pujol, MD
Kondratiev, SN
Mikhailov, S
SURFACE & COATINGS TECHNOLOGY, 2004, 180 : 234 - 237
[5] Suppression of Propagation Losses in TC SAW Resonators Using Thin Plates of LiTaO3 Bonded to Quartz Substrates
Naumenko, Natalya
2018 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), 2018,
[6] High frequency SAW Devices on 36°YX LiTaO3 substrates realized using electron beam lithography
Kirsch, P.
Assouar, M. B.
Elmazria, O.
Tiusan, C.
Alnot, P.
2006 15TH IEEE INTERNATIONAL SYMPOSIUM ON APPLICATIONS OF FERROELECTRICS, 2007, : 272 - +
[7] SAW Filters With Excellent Temperature Stability and High Power Handling Using LiTaO3/SiC Bonded Wafers
Shen, Junyao
Fu, Sulei
Su, Rongxuan
Xu, Huiping
Lu, Zengtian
Zhang, Qiaozhen
Zeng, Fei
Song, Cheng
Wang, Weibiao
Pan, Feng
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2022, 31 (02) : 186 - 193
[8] Evolution of SAW and BAW Devices Using Thin LiTaO3 and LiNbO3
Tanaka, Shuji
Guo, Yong
Kadota, Michio
2024 IEEE MTT-S INTERNATIONAL CONFERENCE ON MICROWAVE ACOUSTICS & MECHANICS, IC-MAM, 2024, : 169 - 172
[9] SAW DEVICES UTILIZING LITAO3 SINGLE-CRYSTAL
HIRANO, H
FERROELECTRICS, 1982, 42 (1-4) : 591 - 602
[10] Temperature Behavior of SAW Resonators Based on LiNbO3/Quartz and LiTaO3/Quartz Substrates
Naumenko, Natalya F.
IEEE TRANSACTIONS ON ULTRASONICS FERROELECTRICS AND FREQUENCY CONTROL, 2021, 68 (11) : 3430 - 3437

← 1 2 3 4 5 →