Investigation of sensitivity of two-dimensional integrated magnetic sensor fabricated in sub-micron CMOS process

被引：2

作者：

Kimura T. ^{[1
]}

Furuya H. ^{[2
]}

Masuzawa T. ^{[1
]}

机构：

[1] Faculty of Engineering, Ibaraki University, Hitachi-shi, Ibaraki 316-8511, 4-12-1, Nakanarusawa-cho

[2] Graduate School of Science and Engineering, Ibaraki University, Hitachi-shi, Ibaraki 316-8511, 4-12-1, Nakanarusawa-cho

来源：

Kyokai Joho Imeji Zasshi/Journal of the Institute of Image Information and Television Engineers | 2011年 / 65卷 / 03期

关键词：

D O I：

10.3169/itej.65.364

中图分类号：

学科分类号：

摘要：

To realize a high-resolution two-dimensional integrated magnetic sensor, the process rule was changed from 0.35 to 0.18 /im. The fabricated magnetic sensor was an n-type Hall sensor that uses an inversion layer under the gate oxide of the MOSFET. The decided sensor area size was 6.6 × 6.6νm 2. The Hall sensors were arrayed in 32×32 pixels. The average sensitivity of the fabricated magnetic sensors was 34.6mV/(mAT), and this value was the same as that of fabricated magnetic sensors in the 0.35μm standard CMOS process. No degradation of sensitivity was introduced to a magnetic sensor fabricated in 0.18 μm process rule. From the result of two-dimensional integrated magnetic sensor, two-dimensional magnetic flux distribution was successfully measured from the 1-mm diameter Nd-Fe-B rare-earth permanent magnet. By changing the position of the probe that measures Hall voltage, the sensitivity of magnetic sensors was increased by 17%.

引用

页码：364 / 366

页数：2

共 50 条

[41] Integrated magnetic field sensors fabricated with a standard CMOS process
Bruschi, P
Navarrini, D
Piotto, M
Di Piro, L
Sensors and Microsystems, 2002, : 397 - 401
[42] Two-Dimensional CMOS MEMS Thermal Flow Sensor With High Sensitivity and Improved Accuracy
Xu, Wei
Wang, Xiaoyi
Zhao, Xu
Lee, Yi-Kuen
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2020, 29 (02) : 248 - 254
[43] Study on the integrated controlling and measuring circuits of the two-dimensional CMOS silicon wind sensor
Key Laboratory of MEMS, Southeast University, Nanjing 210096, China
Dianzi Qijian, 2006, 1 (95-97+101):
[44] Sub-micron structures of magnetic materials fabricated by laser holographic lithography combined with ion beam etching
Zhang, Zijun
Xu, Xiangdong
Liu, Ying
Qiu, Keqiang
Fu, Shaojun
Hong, Yilin
Guo, Yuxian
Xu, Pengshou
Cai, Jianwang
Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2008, 28 (06): : 493 - 497
[45] Sub-micron Junction Termination for 1200V Class Devices toward CMOS Process Compatibility
Seto, Kota
Takaishi, Junpei
Imaki, Hironori
Tanaka, Masahiro
Tsukuda, Masanori
Omura, Ichiro
2013 25TH INTERNATIONAL SYMPOSIUM ON POWER SEMICONDUCTOR DEVICES AND ICS (ISPSD), 2013, : 281 - 284
[46] Titanium self-aligned silicide process fabrication issues for deep sub-micron CMOS devices
Lahiri, SK
Lim, CW
Chan, L
PHYSICS OF SEMICONDUCTOR DEVICES, VOLS 1 AND 2, 1998, 3316 : 957 - 966
[47] Repeater insertion in deep sub-micron CMOS: Ramp-based analytical model and placement sensitivity analysis
Nalamalpu, A
Burleson, W
ISCAS 2000: IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS - PROCEEDINGS, VOL III: EMERGING TECHNOLOGIES FOR THE 21ST CENTURY, 2000, : 766 - 769
[48] A Power Efficient Wide Band Trans-Impedance Amplifier in sub-micron CMOS Integrated Circuit Technology
Raut, Rabin
Ghasemi, Omidreza
2008 JOINT IEEE NORTH-EAST WORKSHOP ON CIRCUITS AND SYSTEMS AND TAISA CONFERENCE, 2008, : 113 - 116
[49] Highly sensitive size discrimination of sub-micron objects using optical Fourier processing based on two-dimensional Gabor filters
Pasternack, Robert M.
Qian, Zhen
Zheng, Jing-Yi
Metaxas, Dimitris N.
Boustany, Nada N.
OPTICS EXPRESS, 2009, 17 (14): : 12001 - 12012
[50] Characteristics of a two-dimensional integrated magnetic sensor for position sensing and motor control
Kimura, Takayuki
Takasaki, Keigo
Masuzawa, Toru
IEEJ TRANSACTIONS ON ELECTRICAL AND ELECTRONIC ENGINEERING, 2006, 1 (02) : 188 - 193

← 1 2 3 4 5 →