Conformal cooling of the injection moulds

被引：0
|
作者：
Běhálek, Luboš [1 ]
Dobránsky, Jozef [2 ]
机构：
[1] Technical University of Liberec, Studentská 2, 461 17 Liberec, Czech Republic
[2] Technical University of Košice, Štúrova 31, 080 01 Prešov, Slovakia
来源：
Applied Mechanics and Materials | 2013年 / 308卷
关键词：
Laser heating - Sintering - Molds - Thermoelectric equipment - Differential scanning calorimetry - Cooling systems - Injection molding - Copper alloys - X ray scattering;
D O I：
10.4028/www.scientific.net/AMM.308.127
中图分类号：
学科分类号：
摘要：
Paper deals with the diagnosis of operating conditions for injection moulding tools. Paper specifically deals with the conformal cooling of injection moulds for its production is using the direct metal laser sintering method. It's quite modern method about injection mould cooling system design to improve cooling intensity. Paper also deals with the evaluation of the temperature fields in the area of the mould shape parts in comparison with the common cooling system with drilled channels namely at using steel or copper alloys for punch production. Moreover there is also evaluated cooling method influence on properties and also injection part morphological structure by methods of wide angle X-ray scattering and differential scanning calorimetry. © (2013) Trans Tech Publications, Switzerland.
引用
收藏
页码：127 / 132
相关论文
共 50 条
  • [41] Goodbye injection moulds
    不详
    KUNSTSTOFFE-PLAST EUROPE, 2004, 94 (11): : 34 - +
  • [42] EFFICIENT COOLING OF FFF INJECTION MOLDING TOOLS WITH CONFORMAL COOLING CHANNELS, -AN INTRODUCTORY ANALYSIS
    Rannar, Lars-Erik
    PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2003, : 389 - 393
  • [43] The Effects of Cooling and Shrinkage on the Life of Polymer 3D Printed Injection Moulds
    Bagalkot, Anurag
    Pons, Dirk
    Symons, Digby
    Clucas, Don
    POLYMERS, 2022, 14 (03)
  • [44] Design and FEM analysis of the milled groove insert method for cooling of plastic injection moulds
    Sun, YF
    Lee, KS
    Nee, AYC
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2004, 24 (9-10): : 715 - 726
  • [45] Design and FEM analysis of the milled groove insert method for cooling of plastic injection moulds
    Y.F. Sun
    K.S. Lee
    A.Y.C. Nee
    The International Journal of Advanced Manufacturing Technology, 2004, 24 : 715 - 726
  • [46] Optimisation of the moulds cooling process
    Emhart Glass SA, Switzerland
    Glass Int, 2007, 6 (57-59):
  • [47] A comprehensive review of injection mold cooling by using conformal cooling channels and thermally enhanced molds
    Arman, Samaneh
    Lazoglu, Ismail
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 127 (5-6): : 2035 - 2106
  • [48] Improving Cooling Performance of Injection Molding Tool with Conformal Cooling Channel by Adding Hybrid Fillers
    Kuo, Chil-Chyuan
    Chen, Wei-Hua
    POLYMERS, 2021, 13 (08)
  • [49] Numerical study of profiled conformal cooling channels for cooling time reduction in injection mould tools
    Altaf, Khurram
    Rani, Ahmad Majdi bin Abdul
    INTERNATIONAL JOURNAL OF ENGINEERING SYSTEMS MODELLING AND SIMULATION, 2015, 7 (04) : 230 - 237
  • [50] A comprehensive review of injection mold cooling by using conformal cooling channels and thermally enhanced molds
    Samaneh Arman
    Ismail Lazoglu
    The International Journal of Advanced Manufacturing Technology, 2023, 127 : 2035 - 2106
12345