Conformal cooling of the injection moulds

被引：0
|
作者：
Běhálek, Luboš [1 ]
Dobránsky, Jozef [2 ]
机构：
[1] Technical University of Liberec, Studentská 2, 461 17 Liberec, Czech Republic
[2] Technical University of Košice, Štúrova 31, 080 01 Prešov, Slovakia
来源：
Applied Mechanics and Materials | 2013年 / 308卷
关键词：
Laser heating - Sintering - Molds - Thermoelectric equipment - Differential scanning calorimetry - Cooling systems - Injection molding - Copper alloys - X ray scattering;
D O I：
10.4028/www.scientific.net/AMM.308.127
中图分类号：
学科分类号：
摘要：
Paper deals with the diagnosis of operating conditions for injection moulding tools. Paper specifically deals with the conformal cooling of injection moulds for its production is using the direct metal laser sintering method. It's quite modern method about injection mould cooling system design to improve cooling intensity. Paper also deals with the evaluation of the temperature fields in the area of the mould shape parts in comparison with the common cooling system with drilled channels namely at using steel or copper alloys for punch production. Moreover there is also evaluated cooling method influence on properties and also injection part morphological structure by methods of wide angle X-ray scattering and differential scanning calorimetry. © (2013) Trans Tech Publications, Switzerland.
引用
收藏
页码：127 / 132
相关论文
共 50 条
  • [11] Automatic Cooling Channel Design for Injection Moulds
    Hopmann, Ch.
    Theunissen, M.
    Schneppe, T.
    Schmitz, M.
    PROCEEDINGS OF 33RD INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-33), 2019, 2139
  • [12] What can pulsed cooling do for injection moulds?
    Schirrmacher, H
    KUNSTSTOFFE-PLAST EUROPE, 2003, 93 (04): : 75 - +
  • [13] Efficiency comparison of conformal cooling channels produced by additive and subtractive manufacturing in automotive industry plastic injection moulds: a hybrid application
    Cemal İrfan Çalışkan
    Aliihsan Koca
    Gökhan Özer
    Ömer Akbal
    Soner Bakır
    The International Journal of Advanced Manufacturing Technology, 2023, 126 : 4419 - 4437
  • [14] Optimisation of Warpage on Plastic Injection Moulding Part with MGSS Conformal Cooling Channels Moulds Using Response Surface Methodology (RSM)
    Hazwan, M. H. M.
    Shayfull, Z.
    Sharif, S.
    Zainal, N.
    Nasir, S. M.
    ADVANCED MATERIALS ENGINEERING AND TECHNOLOGY V, 2017, 1835
  • [15] Efficiency comparison of conformal cooling channels produced by additive and subtractive manufacturing in automotive industry plastic injection moulds: a hybrid application
    Caliskan, Cemal Irfan
    Koca, Aliihsan
    Özer, Gokhan
    Akbal, Omer
    Bakir, Soner
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 126 (9-10): : 4419 - 4437
  • [16] Spiral and conformal cooling in plastic injection molding
    Wang, Yu
    Yu, Kai-Min
    Wang, Charlie C. L.
    COMPUTER-AIDED DESIGN, 2015, 63 : 1 - 11
  • [17] THERMAL CONDUCTIVITY AUGMENTATION OF EPOXY INJECTION MOULDS FOR COOLING TIME REDUCTION
    Altaf, Khurram
    Rani, Ahmad Majdi Abdul
    PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING, 2014, : 270 - 277
  • [18] The application of U-shape milled grooves for cooling of injection moulds
    Sun, YF
    Lee, KS
    Nee, AYC
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2002, 216 (12) : 1561 - 1573
  • [19] Investigation on conformal cooling system design in injection molding
    Hsu, F. H.
    Wang, K.
    Huang, C. T.
    Chang, R. Y.
    ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT, 2013, 8 (02): : 107 - 115
  • [20] The design of conformal cooling channels in injection molding tooling
    Xu, XR
    Sachs, E
    Allen, S
    POLYMER ENGINEERING AND SCIENCE, 2001, 41 (07): : 1265 - 1279
12345