Conformal cooling of the injection moulds

被引：0
|
作者：
Běhálek, Luboš [1 ]
Dobránsky, Jozef [2 ]
机构：
[1] Technical University of Liberec, Studentská 2, 461 17 Liberec, Czech Republic
[2] Technical University of Košice, Štúrova 31, 080 01 Prešov, Slovakia
来源：
Applied Mechanics and Materials | 2013年 / 308卷
关键词：
Laser heating - Sintering - Molds - Thermoelectric equipment - Differential scanning calorimetry - Cooling systems - Injection molding - Copper alloys - X ray scattering;
D O I：
10.4028/www.scientific.net/AMM.308.127
中图分类号：
学科分类号：
摘要：
Paper deals with the diagnosis of operating conditions for injection moulding tools. Paper specifically deals with the conformal cooling of injection moulds for its production is using the direct metal laser sintering method. It's quite modern method about injection mould cooling system design to improve cooling intensity. Paper also deals with the evaluation of the temperature fields in the area of the mould shape parts in comparison with the common cooling system with drilled channels namely at using steel or copper alloys for punch production. Moreover there is also evaluated cooling method influence on properties and also injection part morphological structure by methods of wide angle X-ray scattering and differential scanning calorimetry. © (2013) Trans Tech Publications, Switzerland.
引用
收藏
页码：127 / 132
相关论文
共 50 条
  • [21] Transient Analysis of an Injection Mould with Conformal Cooling Channels
    Sharma, Shivsagar G.
    Singraur, Deepika Singh
    Sudhakar, D. S. S.
    RECENT ADVANCES IN MECHANICAL INFRASTRUCTURE ( ICRAM 2019), 2020, : 235 - 244
  • [22] Analysis and Manufacturing of Conformal Cooling Channels in Injection Mold
    Gao, Guoqiang
    Liu, Yushan
    Cai, Yujun
    MATERIAL SCIENCE, CIVIL ENGINEERING AND ARCHITECTURE SCIENCE, MECHANICAL ENGINEERING AND MANUFACTURING TECHNOLOGY II, 2014, 651-653 : 630 - 633
  • [23] Automatic Generation of Conformal Cooling Channels in Injection Moulding
    Barbeiro S.
    Enguiça R.
    Lobo D.
    CAD Computer Aided Design, 2022, 150
  • [24] COOLING SIMULATION OF CONFORMAL COOLING INJECTION MOULD INSERT PRODUCED BY HYBRID MANUFACTURING
    Homar, David
    Cerce, Luka
    Kopac, Janez
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2017, 24 (04): : 981 - 986
  • [25] Optimization Design of Injection Mold Conformal Cooling Channel for Improving Cooling Rate
    Li, Jinyi
    Ong, Yung Chieh
    Muhamad, Wan Mansor Wan
    PROCESSES, 2024, 12 (06)
  • [26] Design and Optimization of Conformal Cooling Channels for Increasing Cooling Efficiency in Injection Molding
    Wang, Yuandi
    Lee, Changmyung
    APPLIED SCIENCES-BASEL, 2023, 13 (13):
  • [27] Utilizing of inner porous structure in injection moulds for application of special cooling method
    Seidl, M.
    Bobek, J.
    Safka, J.
    Habr, J.
    Novakova, I.
    Behalek, L.
    INTERNATIONAL CONFERENCE ON MICROTECHNOLOGY AND THERMAL PROBLEMS IN ELECTRONICS (MICROTHERM'2015) AND INTERNATIONAL CONFERENCE ON SMART ENGINEERING OF NEW MATERIALS (SENM'2015), 2016, 709
  • [28] An adaptive system for cooling injection-moulding moulds via thermoelectric modules
    Zagar, Bostjan
    Nardin, Blaz
    Glojek, Andrej
    Krizaj, Dejan
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2006, 52 (10): : 630 - 644
  • [29] Automatic design of conformal cooling channels in injection molding tooling
    Zhang, Yingming
    Hou, Binkui
    Wang, Qian
    Li, Yang
    Huang, Zhigao
    INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND APPLIED COMPOSITE MATERIALS, 2018, 307
  • [30] Study on the Optimization of Conformal Cooling Channels for Plastic Injection Mold
    Qian, Ying-ping
    Wang, Yong
    Huang, Ju-hua
    Zhou, Xi-zhi
    MANUFACTURING ENGINEERING AND AUTOMATION II, PTS 1-3, 2012, 591-593 : 502 - +
12345