Conformal cooling of the injection moulds

被引：0
|
作者：
Běhálek, Luboš [1 ]
Dobránsky, Jozef [2 ]
机构：
[1] Technical University of Liberec, Studentská 2, 461 17 Liberec, Czech Republic
[2] Technical University of Košice, Štúrova 31, 080 01 Prešov, Slovakia
来源：
Applied Mechanics and Materials | 2013年 / 308卷
关键词：
Laser heating - Sintering - Molds - Thermoelectric equipment - Differential scanning calorimetry - Cooling systems - Injection molding - Copper alloys - X ray scattering;
D O I：
10.4028/www.scientific.net/AMM.308.127
中图分类号：
学科分类号：
摘要：
Paper deals with the diagnosis of operating conditions for injection moulding tools. Paper specifically deals with the conformal cooling of injection moulds for its production is using the direct metal laser sintering method. It's quite modern method about injection mould cooling system design to improve cooling intensity. Paper also deals with the evaluation of the temperature fields in the area of the mould shape parts in comparison with the common cooling system with drilled channels namely at using steel or copper alloys for punch production. Moreover there is also evaluated cooling method influence on properties and also injection part morphological structure by methods of wide angle X-ray scattering and differential scanning calorimetry. © (2013) Trans Tech Publications, Switzerland.
引用
收藏
页码：127 / 132
相关论文
共 50 条
  • [1] INVESTIGATION OF THE IMPACT OF CONFORMAL COOLING ON THE PERFORMANCE OF INJECTION MOULDS FOR THE PACKAGING INDUSTRY
    Dimitrov, D.
    Moammer, A.
    JOURNAL FOR NEW GENERATION SCIENCES, 2010, 8 (01) : 29 - 46
  • [2] Cooling injection moulds
    Stitz, Siegfried
    Schink, Klaus
    Popp, Manfred
    Kunststoffe Plast Europe, 2000, 90 (07): : 28 - 31
  • [3] Thermal–structural analysis of bi-metallic conformal cooling for injection moulds
    A. B. M. Saifullah
    S. H. Masood
    I. Sbarski
    The International Journal of Advanced Manufacturing Technology, 2012, 62 : 123 - 133
  • [4] Conformal cooling in moulds with special geometry
    Garcia, M. A.
    Garcia-Pando, C.
    Marto, C.
    INNOVATIVE DEVELOPMENTS ON VIRTUAL AND PHYSICAL PROTOTYPING, 2012, : 409 - 412
  • [5] Thermal-structural analysis of bi-metallic conformal cooling for injection moulds
    Saifullah, A. B. M.
    Masood, S. H.
    Sbarski, I.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 62 (1-4): : 123 - 133
  • [6] Experimental analysis of conformal cooling in SLM produced injection moulds: Effects on process and product quality
    Evens, T.
    Six, W.
    De Keyzer, J.
    Desplentere, F.
    Van Bael, A.
    PROCEEDINGS OF THE EUROPE/AFRICA CONFERENCE DRESDEN 2017 - POLYMER PROCESSING SOCIETY PPS, 2019, 2055
  • [7] HEATING/COOLING OF INJECTION MOULDS.
    Friel, Peter
    Kunststoffe - German Plastics, 1985, 75 (09): : 23 - 24
  • [8] Cooling channel configuration in injection moulds
    Dimitrov, D.
    Moammer, A.
    Harms, T.
    INNOVATIVE DEVELOPMENTS IN DESIGN AND MANUFACTURING: ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2010, : 355 - 360
  • [9] Improvements in Injection Moulds Cooling and Manufacturing Efficiency Achieved by Wire Arc Additive Manufacturing Using Conformal Cooling Concept
    Marques, Alejandro
    Dieste, Jose Antonio
    Monzon, Ivan
    Laguia, Alberto
    Gracia, Pascual
    Javierre, Carlos
    Claveria, Isabel
    Elduque, Daniel
    POLYMERS, 2024, 16 (21)
  • [10] Cooling injection moulds - Effective cooling of very small areas
    Stitz, S
    Schink, K
    Popp, M
    KUNSTSTOFFE-PLAST EUROPE, 2000, 90 (07): : A65 - +
12345