Influence of polymer functionalization on adhesion, friction and mold fouling

被引：0
|
作者：
Haupt S. [1 ]
Kroger M. [1 ]
Kriiger J. [2 ]
机构：
[1] Technische Universitat Bergakademie Freiberg Institut fur Maschinenelemente, Agricolastrabe 1, Freiberg
[2] Material & Process Development & Industrialization Tires Commercial Tire Technology, Continental Reifen Deutschland GmbH, Jadekamp 30, Hannover
来源：
Tribologie und Schmierungstechnik | 2021年 / 68卷 / 3-4期
关键词：
demolding force; Demolding test rig; mold fouling; polymer; side wall friction;
D O I：
10.24053/TuS-2021-0021
中图分类号：
学科分类号：
摘要：
At the IMKF, eight different elastomer compounds with different polymer compositions were examined for their demolding characteristics and mold fouling. Ten demolding cycles were carried out for each compound and the fouling of the mold was photo-technical recorded after ten demolding cycles. The used polymer composition does not seem to have any significant influence. However, the components of the compound have a significant influence on the friction characteristics while removing of the vulcanizate from the mold. Crosslinking that begins very early has an initiating influence on mold fouling. The measurable fluctuations in the maximum demolding force that occur could correlate with the internal friction of the polymer with the filler. © 2021 Expert Verlag. All rights reserved.
引用
收藏
页码：58 / 66
页数：8
相关论文
共 50 条
  • [41] INFLUENCE OF THE TYPE OF MEMBRANE-FORMING POLYMER ON THE MEMBRANE FOULING
    Swierczynska, Anna
    Bohdziewicz, Jolanta
    Kaminska, Gabriela
    Wojciechowski, Kamil
    ENVIRONMENT PROTECTION ENGINEERING, 2016, 42 (02): : 197 - 210
  • [42] Modified Nanodiamonds as a Means of Polymer Surface Functionalization. From Fouling Suppression to Biosensor Design
    Melnikov, Pavel V.
    Alexandrovskaya, Anastasia Yu.
    Naumova, Alina O.
    Popova, Nadezhda M.
    Spitsyn, Boris V.
    Zaitsev, Nikolay K.
    Yashtulov, Nikolay A.
    NANOMATERIALS, 2021, 11 (11)
  • [43] The influence of triboelectricity on textile polymer friction parameters
    Truncyte, Dainora
    Daukantiene, Virginija
    Gutauskas, Matas
    FIBRES & TEXTILES IN EASTERN EUROPE, 2008, 16 (01) : 50 - 53
  • [44] Influence of friction in compression testing of a chromoplastic polymer
    Atanasiu, C.
    Sorohan, S.
    Baciu, F.
    8TH INTERNATIONAL CONFERENCE ON ADVANCED CONCEPTS IN MECHANICAL ENGINEERING, 2018, 444
  • [45] Covalent functionalization of carbon nanotubes for ultimate interfacial adhesion to liquid crystalline polymer
    Sahoo, Nanda Gopal
    Cheng, Henry Kuo Feng
    Bao, Hongqian
    Pan, Yongzheng
    Li, Lin
    Chan, Siew Hwa
    SOFT MATTER, 2011, 7 (19) : 9505 - 9514
  • [46] POLYMER ADHESION TO ENAMEL - INFLUENCE OF VISCOSITY AND PENETRATION
    TENCATE, JM
    KEIZER, S
    ARENDS, J
    JOURNAL OF ORAL REHABILITATION, 1977, 4 (02) : 149 - 156
  • [47] INFLUENCE OF STRUCTURE OF POLYMER SUBSTRATE ON ADHESION BEHAVIOR
    MALOSHUK, YS
    VOINOVSK.EA
    SOROKINA, RA
    ANDREEVA, NV
    VOYUTSKI.SS
    VYSOKOMOLEKULYARNYE SOEDINENIYA SECTION B, 1970, 12 (09): : 686 - &
  • [48] How the surface quality of injection mold influence polymer flow
    Stanek, Michal
    Manas, Miroslav
    Janostik, Vaclav
    Reznicek, Martin
    Fluxa, Petr
    Moravek, Jiri
    22ND INTERNATIONAL CONFERENCE ON CIRCUITS, SYSTEMS, COMMUNICATIONS AND COMPUTERS (CSCC 2018), 2018, 210
  • [49] The effect of temperature on the nanoscale adhesion and friction behaviors of thermoplastic polymer films
    Kim, Kwang-Seop
    Ando, Yasuhisa
    Kim, Kyung-Woong
    NANOTECHNOLOGY, 2008, 19 (10)
  • [50] Adhesion and Friction Properties of Polymer Brushes on Rough Surfaces: A Gradient Approach
    Ramakrishna, Shivaprakash N.
    Espinosa-Marzal, Rosa M.
    Naik, Vikrant V.
    Nalam, Prathima C.
    Spencer, Nicholas D.
    LANGMUIR, 2013, 29 (49) : 15251 - 15259
12345