Influence of polymer functionalization on adhesion, friction and mold fouling

被引：0
|
作者：
Haupt S. [1 ]
Kroger M. [1 ]
Kriiger J. [2 ]
机构：
[1] Technische Universitat Bergakademie Freiberg Institut fur Maschinenelemente, Agricolastrabe 1, Freiberg
[2] Material & Process Development & Industrialization Tires Commercial Tire Technology, Continental Reifen Deutschland GmbH, Jadekamp 30, Hannover
来源：
Tribologie und Schmierungstechnik | 2021年 / 68卷 / 3-4期
关键词：
demolding force; Demolding test rig; mold fouling; polymer; side wall friction;
D O I：
10.24053/TuS-2021-0021
中图分类号：
学科分类号：
摘要：
At the IMKF, eight different elastomer compounds with different polymer compositions were examined for their demolding characteristics and mold fouling. Ten demolding cycles were carried out for each compound and the fouling of the mold was photo-technical recorded after ten demolding cycles. The used polymer composition does not seem to have any significant influence. However, the components of the compound have a significant influence on the friction characteristics while removing of the vulcanizate from the mold. Crosslinking that begins very early has an initiating influence on mold fouling. The measurable fluctuations in the maximum demolding force that occur could correlate with the internal friction of the polymer with the filler. © 2021 Expert Verlag. All rights reserved.
引用
收藏
页码：58 / 66
页数：8
相关论文
共 50 条
  • [21] The Influence of Adhesion on Rolling and Sliding Friction: an Experiment
    Lyashenko, I. A.
    Popov, V. L.
    TECHNICAL PHYSICS, 2022, 67 (03) : 203 - 214
  • [22] The influence of structures in the nanometre range on adhesion and friction
    Meine, K
    Kloss, H
    Schneider, T
    Spaltmann, D
    NANOFAIR 2003: NEW IDEAS FOR INDUSTRY, 2003, 1803 : 237 - 241
  • [23] Influence of polymer on fouling and heat transfer on metal surfaces
    Yuan, Rui
    Lin, Riyi
    Lu, Chang
    Yang, Zhengda
    Wang, Xinwei
    Zhang, Liqiang
    APPLIED THERMAL ENGINEERING, 2023, 225
  • [24] INFLUENCE OF CRYSTALLIZATION ON ADHESION IN SYSTEM POLYMER-POLYMER
    RAISIN, IB
    CHALYKH, AE
    VYSOKOMOLEKULYARNYE SOEDINENIYA SERIYA A, 1974, 16 (05): : 1068 - 1072
  • [25] Insights into the Enhancement of MOF/Polymer Adhesion in Mixed-Matrix Membranes via Polymer Functionalization
    Carja, Ionela-Daniela
    Tavares, Sergio Rodrigues
    Shekhah, Osama
    Ozcan, Aydin
    Semino, Rocio
    Kale, Vinayak S.
    Eddaoudi, Mohamed
    Maurin, Guillaume
    ACS APPLIED MATERIALS & INTERFACES, 2021, 13 (24) : 29041 - 29047
  • [26] Single polymer adhesion and friction at the liquid-solid interface
    Hugel, Thorsten
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2014, 247
  • [27] Surface-anchored polymer chains:: Their role in adhesion and friction
    Léger, L
    Raphaël, E
    Hervet, H
    POLYMERS IN CONFINED ENVIRONMENTS, 1999, 138 : 185 - 225
  • [28] FRICTION OF POLYETHYLENE TERPOLYMER MIXTURES ON POLYMER SUBSTRATES - ADHESION DEPENDENCE
    LAVIELLE, L
    WEAR, 1992, 157 (01) : 181 - 187
  • [29] Polymer adhesion and friction: Importance of the outermost molecular groups.
    Maeda, N
    Chen, NH
    Ji, HN
    Mays, JW
    Tirrell, MV
    Israelachvili, J
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2004, 227 : U820 - U820
  • [30] Fluoro-polymer functionalization for enhanced interfacial adhesion and mechanical properties in polymer bonded explosives
    Lin, Congmei
    Zeng, Chengcheng
    Liu, Shijun
    Jin, Bo
    Yang, Zhijian
    Liu, Jiahui
    Pan, Liping
    Ji, Chunliang
    Hao, Lixiao
    Wen, Yushi
    Gong, Feiyan
    Li, Jiang
    Guo, Shaoyun
    POLYMER, 2025, 323
12345