Influence of polymer functionalization on adhesion, friction and mold fouling

被引：0
|
作者：
Haupt S. [1 ]
Kroger M. [1 ]
Kriiger J. [2 ]
机构：
[1] Technische Universitat Bergakademie Freiberg Institut fur Maschinenelemente, Agricolastrabe 1, Freiberg
[2] Material & Process Development & Industrialization Tires Commercial Tire Technology, Continental Reifen Deutschland GmbH, Jadekamp 30, Hannover
来源：
Tribologie und Schmierungstechnik | 2021年 / 68卷 / 3-4期
关键词：
demolding force; Demolding test rig; mold fouling; polymer; side wall friction;
D O I：
10.24053/TuS-2021-0021
中图分类号：
学科分类号：
摘要：
At the IMKF, eight different elastomer compounds with different polymer compositions were examined for their demolding characteristics and mold fouling. Ten demolding cycles were carried out for each compound and the fouling of the mold was photo-technical recorded after ten demolding cycles. The used polymer composition does not seem to have any significant influence. However, the components of the compound have a significant influence on the friction characteristics while removing of the vulcanizate from the mold. Crosslinking that begins very early has an initiating influence on mold fouling. The measurable fluctuations in the maximum demolding force that occur could correlate with the internal friction of the polymer with the filler. © 2021 Expert Verlag. All rights reserved.
引用
收藏
页码：58 / 66
页数：8
相关论文
共 50 条
  • [1] POLYMER POLYMER FRICTION - RELATION TO ADHESION
    LAVIELLE, L
    WEAR, 1991, 151 (01) : 63 - 75
  • [2] The influence of fatty acids and humidity on friction and adhesion of hydrophilic polymer surfaces
    Garoff, N
    Zauscher, S
    LANGMUIR, 2002, 18 (18) : 6921 - 6927
  • [3] Polymer-polymer friction: adhesion dependence
    Lavielle, L.
    Lamouri, S.
    Journal of Synthetic Lubrication, 1995, 12 (02): : 125 - 131
  • [4] Interfacial Friction and Adhesion of Polymer Brushes
    Landherr, Lucas J. T.
    Cohen, Claude
    Agarwal, Praveen
    Archer, Lynden A.
    LANGMUIR, 2011, 27 (15) : 9387 - 9395
  • [5] FRICTION AND ADHESION OF HIGH POLYMER MATERIALS
    LAVRENTE.V
    VAKULA, V
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 1974, : 109 - 109
  • [6] Adhesion and friction mechanisms of polymer-on-polymer surfaces
    Maeda, N
    Chen, NH
    Tirrell, M
    Israelachvili, JN
    SCIENCE, 2002, 297 (5580) : 379 - 382
  • [7] Static friction and adhesion in polymer-polymer microbearings
    Rymuza, Z
    Kusznierewicz, Z
    Solarski, T
    Kwacz, M
    Chizhik, SA
    Goldade, AV
    WEAR, 2000, 238 (01) : 56 - 69
  • [8] Adhesion and friction mechanisms of polymer-on-polymer surfaces.
    Maeda, N
    Chen, NH
    Tirrell, MV
    Israelachvili, J
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2003, 225 : U624 - U624
  • [9] Surface anchored polymer: Role in adhesion and friction
    Leger, L
    MACROMOLECULAR SYMPOSIA, 1997, 121 : 263 - 267
  • [10] INFLUENCE AND STUDY OF ADHESION IN THE FRICTION AREA
    FONT, D
    BRISSOT, J
    MONTES, H
    VIDE-SCIENCE TECHNIQUE ET APPLICATIONS, 1985, 40 (228): : 449 - 456
12345