Electrochemical Performance of Al-Zn-In-Mg-Ga-Mn Alloys as Anodes for Al-Air Batteries

被引：0

作者：

Wu H. ^{[1
,2
]}

Duan T. ^{[2
]}

Ma L. ^{[2
]}

Shao G. ^{[1
]}

Zhang H. ^{[2
]}

机构：

[1] State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan

[2] National State Key Laboratory for Marine Corrision and Protection, Luoyang Ship Material Research Institute, Qingdao

来源：

Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research | 2024年 / 38卷 / 04期

关键词：

Al-Zn-In-Mg-Ga-Mn alloy; aluminum-air battery; corrosion behavior; electrochemical performance; metallic materials;

D O I：

10.11901/1005.3093.2023.256

中图分类号：

学科分类号：

摘要：

The free corrosion behavior and electrochemical properties of Al-Zn-In-Mg-Ga-Mn alloys, as anodes working with 2 mol/L NaCl and 4 mol/L KOH electrolytes were studied. Results revealed that in the two electrolytes, the corrosion potential (Ecorr) of alloy anodes shifted negatively by 0.041 V and 0.018 V, and the free corrosion rates decreased by 0.2146 and 15.1 mg·cm-2·h-1, respectively in the contrast to those of pure Al anode. The electrochemical activity of pure Al anode was improved, while its free corrosion behavior was inhibited. In the 2 mol/L NaCl electrolyte, the discharge capacity peak of the alloy anode reached 2608.96 Ah·kg-1, which was 55.59% higher than that of the pure Al anode. The highest energy density attained 1742.61 Wh·kg-1, being 274.58% superior to that of the pure Al anode. The anode efficiency was 87.55%. In the 4 mol/L KOH electrolyte, the highest discharge capacity of the Al-Zn-In-Mg-Ga-Mn alloy anode was 1605.15 Ah·kg-1, which was 131.27% higher than that of the pure Al anode. The highest energy density was 1404.83 Wh·kg-1, which was 231.52% higher than that of the pure Al anode. The anode efficiency was 53.86%. © 2024 Chinese Journal of Materials Research. All rights reserved.

引用

页码：257 / 268

页数：11

共 48 条

[41] Ma J L, Wen J B, Gao J W, Et al., Performance of Al-0.5 Mg-0.02 Ga-0.1 Sn-0.5 Mn as anode for Al-air battery in NaCl solutions, J. Power Sources, 253, (2014)
[42] Liu X, Zhang P J, Xue J L, Et al., High energy efficiency of Al-based anodes for Al-air battery by simultaneous addition of Mn and Sb, Chem. Eng. J, 417, (2021)
[43] Feng Y, Li X G, Wang R C, Et al., Influence of cerium on micro-structures and electrochemical properties of Al-Mg-Sn-Hg anode materials for seawater battery, J. Rare Earths, 33, 9, (2015)
[44] Liu X, Xue J L, Zhang P J, Et al., Effects of the combinative Ca, Sm and La additions on the electrochemical behaviors and discharge performance of the as-extruded AZ91 anodes for Mg-air batteries, J. Power Sources, 414, (2019)
[45] Zhang P J, Liu X, Xue J L, Et al., The role of microstructural evolution in improving energy conversion of Al-based anodes for metal-air batteries, J. Power Sources, 451, (2020)
[46] Newman R C., Local chemistry considerations in the tunnelling corrosion of aluminium, Corros. Sci, 37, 3, (1995)
[47] Li L, Liu H, Yan Y, Et al., Effects of alloying elements on the electrochemical behaviors of Al-Mg-Ga-In based anode alloys, Int. J. Hyd. Energy, 44, 23, (2019)
[48] Yu M Z, Cui J, Tang Z C, Et al., Effect of Er-rich precipitates on microstructure and electrochemical behavior of the Al-5Zn-0.03In alloy, Metals, 12, 1, (2022)

← 1 2 3 4 5 →