Electrochemical Performance of Al-Zn-In-Mg-Ga-Mn Alloys as Anodes for Al-Air Batteries

被引：0

作者：

Wu H. ^{[1
,2
]}

Duan T. ^{[2
]}

Ma L. ^{[2
]}

Shao G. ^{[1
]}

Zhang H. ^{[2
]}

机构：

[1] State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan

[2] National State Key Laboratory for Marine Corrision and Protection, Luoyang Ship Material Research Institute, Qingdao

来源：

Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research | 2024年 / 38卷 / 04期

关键词：

Al-Zn-In-Mg-Ga-Mn alloy; aluminum-air battery; corrosion behavior; electrochemical performance; metallic materials;

D O I：

10.11901/1005.3093.2023.256

中图分类号：

学科分类号：

摘要：

The free corrosion behavior and electrochemical properties of Al-Zn-In-Mg-Ga-Mn alloys, as anodes working with 2 mol/L NaCl and 4 mol/L KOH electrolytes were studied. Results revealed that in the two electrolytes, the corrosion potential (Ecorr) of alloy anodes shifted negatively by 0.041 V and 0.018 V, and the free corrosion rates decreased by 0.2146 and 15.1 mg·cm-2·h-1, respectively in the contrast to those of pure Al anode. The electrochemical activity of pure Al anode was improved, while its free corrosion behavior was inhibited. In the 2 mol/L NaCl electrolyte, the discharge capacity peak of the alloy anode reached 2608.96 Ah·kg-1, which was 55.59% higher than that of the pure Al anode. The highest energy density attained 1742.61 Wh·kg-1, being 274.58% superior to that of the pure Al anode. The anode efficiency was 87.55%. In the 4 mol/L KOH electrolyte, the highest discharge capacity of the Al-Zn-In-Mg-Ga-Mn alloy anode was 1605.15 Ah·kg-1, which was 131.27% higher than that of the pure Al anode. The highest energy density was 1404.83 Wh·kg-1, which was 231.52% higher than that of the pure Al anode. The anode efficiency was 53.86%. © 2024 Chinese Journal of Materials Research. All rights reserved.

引用

页码：257 / 268

页数：11

共 48 条

[11] Liang R, Su Y, Sui X L, Et al., Effect of Mg content on discharge behavior of Al-0.05Ga-0.05Sn-0.05Pb-xMg alloy anode for aluminum-air battery, J. Solid State Electrochem, 23, 1, (2019)
[12] Zhou S G, Tian C, Alzoabi S, Et al., Performance of an Al-0.08Sn-0.08Ga-xMg alloy as an anode for Al-air batteries in alkaline electrolytes, J. Mater. Sci, 55, (2020)
[13] Ren J M, Ma J B, Zhang J, Et al., Electrochemical performance of pure Al, Al-Sn, Al-Mg and Al-Mg-Sn anodes for Al-air batteries, J. Alloys Compd, 808, (2019)
[14] Zhang H T, Zheng Y Q, Yin G, Et al., The influence of Ga, Sn, or Bi addition on the electrochemical behavior and discharge performance of Al-Zn-In anodes for Al-air batteries, J. Mater. Sci, 56, 18, (2021)
[15] Wang Q, Miao H, Xue Y J, Et al., Performances of an Al-0.15Bi-0.15Pb-0.035 Ga alloy as an anode for Al-air batteries in neutral and alkaline electrolytes, RSC Adv, 7, 42, (2017)
[16] Senel E, Nisancioglu K., Role of dealloying on the electrochemical behaviour of aluminium alloyed with trace amounts of gallium [J], Corros. Sci, 85, (2014)
[17] Wu Z B, Zhang H T, Guo C, Et al., Effects of indium, gallium, or bismuth additions on the discharge behavior of Al-Mg-Sn-based alloy for Al-air battery anodes in NaOH electrolytes, J. Solid State Electrochem, 23, 8, (2019)
[18] Zhuang Z H, Feng Y, Peng C Q, Et al., Effect of Ga on microstructure and electrochemical performance of Al-0.4Mg-0.05Sn-0.03Hg alloy as anode for Al-air batteries, Trans. Nonferrous Met. Soc. China, 31, 9, (2021)
[19] Sun Z G, Lu H M., Performance of Al-0.5In as anode for Al-Air battery in inhibited alkaline solutions, J. Electrochem. Soc, 162, 8, (2015)
[20] Park I J, Choi S R, Kim J G., Aluminum anode for aluminum-air battery-Part II: influence of In addition on the electrochemical characteristics of Al-Zn alloy in alkaline solution, J. Power Sources, 357, (2017)

← 1 2 3 4 5 →