Electrochemical Performance of Al-Zn-In-Mg-Ga-Mn Alloys as Anodes for Al-Air Batteries

被引：0

作者：

Wu H. ^{[1
,2
]}

Duan T. ^{[2
]}

Ma L. ^{[2
]}

Shao G. ^{[1
]}

Zhang H. ^{[2
]}

机构：

[1] State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Technology, Wuhan

[2] National State Key Laboratory for Marine Corrision and Protection, Luoyang Ship Material Research Institute, Qingdao

来源：

Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research | 2024年 / 38卷 / 04期

关键词：

Al-Zn-In-Mg-Ga-Mn alloy; aluminum-air battery; corrosion behavior; electrochemical performance; metallic materials;

D O I：

10.11901/1005.3093.2023.256

中图分类号：

学科分类号：

摘要：

The free corrosion behavior and electrochemical properties of Al-Zn-In-Mg-Ga-Mn alloys, as anodes working with 2 mol/L NaCl and 4 mol/L KOH electrolytes were studied. Results revealed that in the two electrolytes, the corrosion potential (Ecorr) of alloy anodes shifted negatively by 0.041 V and 0.018 V, and the free corrosion rates decreased by 0.2146 and 15.1 mg·cm-2·h-1, respectively in the contrast to those of pure Al anode. The electrochemical activity of pure Al anode was improved, while its free corrosion behavior was inhibited. In the 2 mol/L NaCl electrolyte, the discharge capacity peak of the alloy anode reached 2608.96 Ah·kg-1, which was 55.59% higher than that of the pure Al anode. The highest energy density attained 1742.61 Wh·kg-1, being 274.58% superior to that of the pure Al anode. The anode efficiency was 87.55%. In the 4 mol/L KOH electrolyte, the highest discharge capacity of the Al-Zn-In-Mg-Ga-Mn alloy anode was 1605.15 Ah·kg-1, which was 131.27% higher than that of the pure Al anode. The highest energy density was 1404.83 Wh·kg-1, which was 231.52% higher than that of the pure Al anode. The anode efficiency was 53.86%. © 2024 Chinese Journal of Materials Research. All rights reserved.

引用

页码：257 / 268

页数：11

共 48 条

[21] Zhang C, Wang R C, Feng Y, Et al., Effects of alloying elements on electrochemical performance of aluminum anodes, J. Central South Univ. (Sci. Technol.), 43, 1, (2012)
[22] Herraiz-Cardona I, Ortega E, Perez-Herranz V., Impedance study of hydrogen evolution on Ni/Zn and Ni-Co/Zn stainless steel based electrodeposits, Electrochim. Acta, 56, 3, (2011)
[23] He J G, Wen J B, Li X D, Et al., Influence of Ga and Bi on electrochemical performance of Al-Zn-Sn sacrificial anodes, Trans. Nonferrous Met. Soc. China, 21, 7, (2011)
[24] Graver B, van Helvoort A T J, Nisancioglu K., Effect of heat treatment on anodic activation of aluminium by trace element indium, Corros. Sci, 52, 11, (2010)
[25] Wu Z B, Zhang H T, Nagaumi H, Et al., Effect of microstructure evolution on the discharge characteristics of Al-Mg-Sn-based anodes for Al-air batteries, J. Power Sources, 521, (2022)
[26] Wu Z B, Zhang H T, Zou J, Et al., Effect of microstructure on discharge performance of Al-0.8 Sn-0.05Ga-0.9Mg-1.0Zn (wt.%) alloy as anode for seawater-activated battery, Mater. Corros, 71, 10, (2020)
[27] Zhang C, Cai Z Y, Wang R C, Et al., Enhancing the electrochemical performance of Al-Mg-Sn-Ga alloy anode for Al-air battery by solution treatment, J. Electrochem. Soc, 168, 3, (2021)
[28] Li Y W, Wang Y C, Zhang S M, Et al., Corrosion inhibition of aromatic acids on Al-7075 anode for Al-air batteries with alkaline electrolyte, J. Power Sources, 523, (2022)
[29] Gelman D, Lasman I, Elfimchev S, Et al., Aluminum corrosion mitigation in alkaline electrolytes containing hybrid inorganic/organic inhibitor system for power sources applications, J. Power Sources, 285, (2015)
[30] Wu S A, Zhang Q, Sun D, Et al., Understanding the synergistic effect of alkyl polyglucoside and potassium stannate as advanced hybrid corrosion inhibitor for alkaline aluminum-air battery, Chem. Eng. J, 383, (2020)

← 1 2 3 4 5 →