The module injection technology - Operating results at Nucor Yamato Steel

被引：0
|
作者：
McCauley, John
Pujadas, Andrè
Iacuzzi, Massimo
机构：
来源：
MPT Metallurgical Plant and Technology International | 2002年 / 25卷 / 03期
关键词：
Carbon - Combustion - Electric arcs - Electric furnaces - Electrodes - Melting - Oxygen - Slags;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Nucor Yamato Steel has installed the Module Injection Technology developed by More srl, Italy, in the two electric arc furnaces in its Blytheville structural steel mill. This new technology exploits the thermal energy generated by the efficient combustion of the oxygen and carbon injected into the electric arc furnace for optimizing the metallurgical process. This additional energy generated during scrap melting is transferred into the steel bath by the foamy slag. The advantages of this process include lower electricity consumption, more homogeneous temperature distribution and chemical composition of the steel, lower electrode consumption and thus higher overall productivity.
引用
收藏
页码：40 / 43
相关论文
共 50 条
  • [41] MASTERING BLAST-FURNACE OPERATING TECHNOLOGY WITH INJECTION OF EMULSION OF WATER AND HEAVY FUEL-OIL INTO FURNACE HEARTH
    VAKULIN, VN
    MINIKES, EE
    SLEPTSOV, ZE
    KUKHTIN, TI
    SAREKENOV, KZ
    STEEL IN THE USSR, 1980, 10 (06): : 294 - 296
  • [42] Parallel 10-channel optical transmitter module operating over 10 Gbit/sec based on Silicon Optical Bench technology
    Delpiano, F
    Bostica, B
    Burzio, R
    Pellegrino, P
    Pesando, L
    ECIO'99: 9TH EUROPEAN CONFERENCE ON INTEGRATED OPTICS AND TECHNICAL EXHIBITION, 1999, : 433 - 436
  • [43] Estimation of Most Frequent Operating Conditions of Different Technology Silicon Photovoltaic Module in India Using IEC 61853-1 Approach
    Mohammed, Humaid
    Gupta, Rajesh
    Sastry, Oruganti
    Bora, Brinchi
    Magare, Dhiraj
    Singh, Yogesh
    Kumar, Sagarika
    9TH INTERNATIONAL CONFERENCE ON CRYSTALLINE SILICON PHOTOVOLTAICS (SILICONPV 2019), 2019, 2147
  • [44] Application of oxygen-injection technology using the RCB system, especially for the production of stainless steel in an EAF
    Moxon, P
    Abel, M
    Knapp, H
    Cooke, R
    REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 2004, 101 (04): : 309 - +
  • [45] Application of oxygen-injection technology using the RCB system, especially for the production of stainless steel in an EAF
    Moxon, P.
    Abel, M.
    Knapp, H.
    Cooke, R.
    Metall Ital, 11-12 (66-68):
  • [46] Doubling tundish volume at AK Steel's Middletown Works: Structural criteria, design considerations and operating results
    Schade, J
    Smith, MP
    Palmer, SE
    79TH STEELMAKING CONFERENCE PROCEEDINGS, 1996, 79 : 345 - 365
  • [47] EXTENSION AND INITIAL OPERATING RESULTS OF THE LD STEEL PLANT NO-3 OF VOEST-ALPINE-STAHL-LINZ
    PRIMAS, K
    STAHL UND EISEN, 1992, 112 (05): : 89 - 94
  • [48] Bifacial PV module operating temperature: high or low? A cross-comparison of thermal modeling results with outdoor on-site measurements
    Liu, Tingting
    Xu, Xiaoqi
    Zhang, Zhigen
    Xiao, Jianwei
    Yu, Yuanjie
    Jaubert, Jean-Nicolas
    2021 IEEE 48TH PHOTOVOLTAIC SPECIALISTS CONFERENCE (PVSC), 2021, : 2070 - 2073
  • [49] Investigation of Stainless Steel Obtained by Additive Technology as Applied to the Operating Conditions of Liquid Metal Heat-Exchange Systems
    Ladyko M.A.
    Lyublinski I.E.
    Eremin A.G.
    Logachev I.A.
    Sentyurina Z.A.
    Dzhumaev P.S.
    Inorganic Materials: Applied Research, 2020, 11 (02) : 343 - 348
  • [50] A Low Operating Power FinFET Transistor Module Featuring Scaled Gate Stack and Strain Engineering for 32/28nm SoC Technology
    Yeh, Chih-Chieh
    Chang, Chih-Sheng
    Lin, Hong-Nien
    Tseng, Wei-Hsiung
    Lai, Li-Shyue
    Perng, Tsu-Hsiu
    Lee, Tsung-Lin
    Chang, Chang-Yun
    Yao, Liang-Gi
    Chen, Chia-Cheng
    Kuan, Ta-Ming
    Xu, Jeff J.
    Ho, Chia-Cheng
    Chen, Tzu-Chiang
    Lin, Shyue-Shyh
    Tao, Hun-Jan
    Cao, Min
    Chang, Chih-Hao
    Ko, Ting-Chu
    Chen, Neng-Kuo
    Chen, Shih-Cheng
    Lin, Chia-Pin
    Lin, Hsien-Chin
    Chan, Ching-Yu
    Lin, Hung-Ta
    Yang, Shu-Ting
    Sheu, Jyh-Cheng
    Fu, Chu-Yun
    Hung, Shih-Ting
    Yuan, Feng
    Shieh, Ming-Feng
    Hu, Chia-Feng
    Wann, Clement
    2010 INTERNATIONAL ELECTRON DEVICES MEETING - TECHNICAL DIGEST, 2010,
12345