Incorporation of petroleum waste in clay ceramics and its characterisation

被引：0
|
作者：
Santos, Rogerio S. [1 ]
Silva, Angelus G.P. [1 ]
Holanda, José Nilson F. [1 ]
机构：
[1] Laboratory of Advanced Materials, Science and Tecnology Centre, Northern Fluminense State University, Av. Alberto Lamego 2000 CEP 28013-602, Campos dos Goytacazes, Brazil
来源：
International Journal of Environment and Waste Management | 2008年 / 2卷 / 06期
关键词：
Petroleum industry - Environmental impact - Leaching;
D O I：
10.1504/IJEWM.2008.021865
中图分类号：
学科分类号：
摘要：
In Brazil, the growth of the petroleum industry has resulted in an increasing amount of toxic oily wastes that have a high environmental impact. This work analyses the possibility of recovering waste from the petroleum industry using the powder technology route to produce clay-based ceramics. Batches of clay-petroleum waste mixes with up to 20 wt.% waste were prepared. The results showed that the incorporation of petroleum waste influenced the technological properties of the fired pieces. Leaching tests have shown that the petroleum waste could be inertised within a clay ceramic fired at 1100C. In addition, petroleum waste containing pieces presented technological properties acceptable for application in clay-based ceramics. © 2008, Inderscience Publishers.
引用
收藏
页码：625 / 635
相关论文
共 50 条
  • [41] Preparation of mullite based ceramics from clay-kaolin waste mixtures
    Alves, Hugo P. A.
    Silva, Jaqueligia B.
    Campos, Liszandra F. A.
    Torres, Sandro M.
    Dutra, Ricardo P. S.
    Macedo, Daniel A.
    CERAMICS INTERNATIONAL, 2016, 42 (16) : 19086 - 19090
  • [42] Characterizations of temperature effects on sintered ceramics manufactured with waste foundry sand and clay
    Deng-Fong Lin
    Huan-Lin Luo
    Jyung-Dong Lin
    Mei-Ling Zhuang
    Journal of Material Cycles and Waste Management, 2018, 20 : 127 - 136
  • [43] Characterizations of temperature effects on sintered ceramics manufactured with waste foundry sand and clay
    Lin, Deng-Fong
    Luo, Huan-Lin
    Lin, Jyung-Dong
    Zhuang, Mei-Ling
    JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT, 2018, 20 (01) : 127 - 136
  • [44] Fabrication and characterisation of porous mullite ceramics from high voltage insulator waste
    Xu, N. N.
    Li, S. J.
    Li, Y. B.
    Yuan, L.
    Zhang, J. L.
    Wang, L.
    Xu, J.
    ADVANCES IN APPLIED CERAMICS, 2015, 114 (02) : 93 - 98
  • [45] A Study of Performance of Compressed Earth Brick Incorporation with Waste Fire Clay Brick as a Filler
    Yassin, Nurain Izzati Mohd
    Burhanudin, Mohd Khairy
    Ekhwan, Nur Ilmiah Izzah
    Hadipramana, Josef
    INTERNATIONAL JOURNAL OF SUSTAINABLE CONSTRUCTION ENGINEERING AND TECHNOLOGY, 2023, 14 (03): : 193 - 199
  • [46] INCORPORATION OF SIMULATED WASTE RAFFINATES CONTAINING CS-134 INTO CEMENT CLAY MATRICES
    ABDELGAWAD, AS
    MIKHAIL, EM
    ELNAGGAR, HA
    HEKAL, EE
    ELENEIN, SAA
    HEALTH PHYSICS, 1991, 61 (03): : 387 - 393
  • [47] Characterisation of Ballina clay
    Pineda, J. A.
    Suwal, L. P.
    Kelly, R. B.
    Bates, L.
    Sloan, S. W.
    GEOTECHNIQUE, 2016, 66 (07): : 556 - 577
  • [48] INDUSTRIAL CERAMICS .1. CLAY AND NON-CLAY CERAMICS
    WAYE, BE
    ENGINEERING MATERIALS AND DESIGN, 1976, 20 (03): : 9 - 12
  • [49] Americium and trivalent Lanthanides incorporation in high-level waste glass-ceramics
    Bardez-Giboire, Isabelle
    Kidari, Abdessamad
    Magnin, Magali
    Dussossoy, Jean-Luc
    Peuget, Sylvain
    Caraballo, Richard
    Tribet, Magaly
    Doreau, Franck
    Jegou, Christophe
    JOURNAL OF NUCLEAR MATERIALS, 2017, 492 : 231 - 238
  • [50] Valorization of coffee waste with Moroccan clay to produce a porous red ceramics (class BIII)
    Manni, Ahmed
    El Haddar, Abdelilah
    El Hassani, Iz-Eddine El Amrani
    El Bouari, Abdeslam
    Sadik, Chaouki
    BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 2019, 58 (05): : 211 - 220
12345