Incorporation of petroleum waste in clay ceramics and its characterisation

被引:0
|
作者
Santos, Rogerio S. [1 ]
Silva, Angelus G.P. [1 ]
Holanda, José Nilson F. [1 ]
机构
[1] Laboratory of Advanced Materials, Science and Tecnology Centre, Northern Fluminense State University, Av. Alberto Lamego 2000 CEP 28013-602, Campos dos Goytacazes, Brazil
关键词
Petroleum industry - Environmental impact - Leaching;
D O I
10.1504/IJEWM.2008.021865
中图分类号
学科分类号
摘要
In Brazil, the growth of the petroleum industry has resulted in an increasing amount of toxic oily wastes that have a high environmental impact. This work analyses the possibility of recovering waste from the petroleum industry using the powder technology route to produce clay-based ceramics. Batches of clay-petroleum waste mixes with up to 20 wt.% waste were prepared. The results showed that the incorporation of petroleum waste influenced the technological properties of the fired pieces. Leaching tests have shown that the petroleum waste could be inertised within a clay ceramic fired at 1100C. In addition, petroleum waste containing pieces presented technological properties acceptable for application in clay-based ceramics. © 2008, Inderscience Publishers.
引用
收藏
页码:625 / 635
相关论文
共 50 条
  • [31] Custom formulation of red ceramics with clay, sewage sludge and forest waste
    Devant, M.
    Cusido, J. A.
    Soriano, C.
    APPLIED CLAY SCIENCE, 2011, 53 (04) : 669 - 675
  • [32] PROPERTIES OF CLAY-BASED CERAMICS ADDED WITH CONSTRUCTION AND DEMOLITION WASTE
    Acchar, Wilson
    Silva, Juliana Emidia
    Mello-Castanho, Sonia R. H.
    Segadaes, Ana Maria
    EPD CONGRESS 2009, PROCEEDINGS, 2009, : 907 - +
  • [33] Characterization of sunflower husk ashes and feasibility analysis of their incorporation in soil and clay mixtures for ceramics
    Quaranta, N. E.
    Pelozo, G. G.
    Cesari, A.
    Cristobal, A. A.
    ENVIRONMENTAL IMPACT III, 2016, 203 : 13 - 23
  • [34] Incorporation of sludge from effluent treatment plant of an industrial laundry into heavy clay ceramics
    Girondi Delaqua, Geovana Carla
    Ferreira, Milena das Neves
    Amaral, Lucas Fonseca
    Sanchez Rodriguez, Ruben Jesus
    de Carvalho, Eduardo Atem
    Fontes Vieira, Carlos Mauricio
    JOURNAL OF BUILDING ENGINEERING, 2022, 47
  • [35] Evaluation of the Incorporation of Waste Generated from Titanium Dioxide Manufacturing in Red Ceramics
    Ribeiro, Daniel Veras
    Figueiredo, Samia Cordeiro
    Machado, Alexandre Teixeira
    Valenzuela Diaz, Francisco Rolando
    Caldas Souza, Carlos Alberto
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2015, 18 (01): : 98 - 105
  • [36] CHARACTERIZATION OF CIVIL CONSTRUCTION WASTE AND ITS INCORPORATION TO MORTAR
    Cunha, G. A.
    Andrade, A. C. D.
    Souza, J. M. M.
    Evangelista, A. C. J.
    Almeida, V. C.
    ADVANCED POWDER TECHNOLOGY VII, 2010, 660-661 : 1043 - 1048
  • [37] Effectiveness of technogenic waste usage in products of building ceramics and expanded clay concrete
    Malaiskiene, J.
    Vaiciene, M.
    Zurauskiene, R.
    CONSTRUCTION AND BUILDING MATERIALS, 2011, 25 (10) : 3869 - 3877
  • [38] The Effect of the Addition of Construction & Demolition Waste on the Properties of Clay-based Ceramics
    Angjusheva, Biljana
    Ducman, Vilma
    Fidanchevski, Emilija
    SCIENCE OF SINTERING, 2022, 54 (03) : 359 - 371
  • [39] PROPERTIES OF CLAY FOR CERAMICS WITH ROCK WASTE FOR PRODUCTION STRUCTURAL BLOCK BY PRESSING AND FIRING
    Cerqueira, N. A.
    Choe, D.
    Alexandre, J.
    Azevedo, A. R. G.
    Xavier, C. G.
    Souza, V. B.
    CHARACTERIZATION OF MINERALS, METALS, AND MATERIALS 2016, 2016, : 653 - 659
  • [40] Increased added value reuse of construction waste in clay based building ceramics
    Acchar, W.
    Silva, J. E.
    Segadaes, A. M.
    ADVANCES IN APPLIED CERAMICS, 2013, 112 (08) : 487 - 493