Incorporation of petroleum waste in clay ceramics and its characterisation

被引：0
|
作者：
Santos, Rogerio S. [1 ]
Silva, Angelus G.P. [1 ]
Holanda, José Nilson F. [1 ]
机构：
[1] Laboratory of Advanced Materials, Science and Tecnology Centre, Northern Fluminense State University, Av. Alberto Lamego 2000 CEP 28013-602, Campos dos Goytacazes, Brazil
来源：
International Journal of Environment and Waste Management | 2008年 / 2卷 / 06期
关键词：
Petroleum industry - Environmental impact - Leaching;
D O I：
10.1504/IJEWM.2008.021865
中图分类号：
学科分类号：
摘要：
In Brazil, the growth of the petroleum industry has resulted in an increasing amount of toxic oily wastes that have a high environmental impact. This work analyses the possibility of recovering waste from the petroleum industry using the powder technology route to produce clay-based ceramics. Batches of clay-petroleum waste mixes with up to 20 wt.% waste were prepared. The results showed that the incorporation of petroleum waste influenced the technological properties of the fired pieces. Leaching tests have shown that the petroleum waste could be inertised within a clay ceramic fired at 1100C. In addition, petroleum waste containing pieces presented technological properties acceptable for application in clay-based ceramics. © 2008, Inderscience Publishers.
引用
收藏
页码：625 / 635
相关论文
共 50 条
  • [21] Fluorescent Lamp Glass Waste Incorporation into Clay Ceramic: A Perfect Solution
    Cordeiro Morais, Alline Sardinha
    Fontes Vieira, Carlos Mauricio
    Sanchez Rodriguez, Ruben Jesus
    Monteiro, Sergio Neves
    Candido, Veronica Scarpini
    Ferreira, Carlos Luiz
    JOM, 2016, 68 (09) : 2425 - 2434
  • [22] Characterization of Clay Mix with Incorporation of Granite Waste for the Production of Ceramic Tiles
    Azevedo, A. R. G.
    Cecchin, D.
    Luiz, N. F.
    Cruz, V. F.
    Marvila, M. T.
    Zanelato, E. B.
    Monteiro, S. N.
    Morais, G.
    Alexandre, J.
    CHARACTERIZATION OF MINERALS, METALS, AND MATERIALS 2020, 2020, : 469 - 475
  • [23] Evaluation of the Effect of the Incorporation of Blends of Fuel and Fluxing Wastes in Red Clay Ceramics
    Sales Barreto, Gabriela Nunes
    Babisk, Michelle Pereira
    Girondi Delaqua, Geovana Carla
    Borlini Gadioli, Monica Castoldi
    Fontes Vieira, Carlos Mauricio
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2019, 22
  • [24] DISPOSING OF WASTE - ITS INCORPORATION IN TECTONIC SINKS
    BOSTROM, RC
    SHERIF, MA
    TRANSACTIONS-AMERICAN GEOPHYSICAL UNION, 1970, 51 (11): : 762 - &
  • [25] Densification behaviour of petroleum waste bearing clay-based ceramic bodies
    Souza, GP
    Holanda, JNF
    CERAMICS INTERNATIONAL, 2004, 30 (01) : 99 - 104
  • [26] Thermal characterization of sintered clay-petroleum waste mix by the photoacoustic technique
    Rodrigues, MF
    Sthel, MS
    Vargas, H
    Holanda, JNF
    ADVANCED POWDER TECHNOLOGY IV, 2005, 498-499 : 512 - 516
  • [27] Production of red ceramics using gypsum mining clay and gypsum waste
    Cipriano, Pamela Bento
    Oliveira de Rezende, Rafaela Tatianne
    Ferraza, Andrea de Vasconcelos
    ACTA BRASILIENSIS, 2019, 3 (01): : 25 - 29
  • [28] Elastic properties of waste calcite-clay ceramics during firing
    Stubna, Igor
    Trnik, Anton
    Podoba, Rudolf
    Sokolar, Radomir
    Bacik, Peter
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2012, 120 (1405) : 351 - 354
  • [29] Characterisation of sago pith waste and its composites
    Lai, Jau Choy
    Rahman, Wan Aizan Wan Abdul
    Toh, Wen Yee
    INDUSTRIAL CROPS AND PRODUCTS, 2013, 45 : 319 - 326
  • [30] Editorial for Special Issue "Clay Minerals and Waste Fly Ash Ceramics"
    Valaskova, Marta
    MINERALS, 2022, 12 (01)
12345