Incorporation of petroleum waste in clay ceramics and its characterisation

被引:0
|
作者
Santos, Rogerio S. [1 ]
Silva, Angelus G.P. [1 ]
Holanda, José Nilson F. [1 ]
机构
[1] Laboratory of Advanced Materials, Science and Tecnology Centre, Northern Fluminense State University, Av. Alberto Lamego 2000 CEP 28013-602, Campos dos Goytacazes, Brazil
关键词
Petroleum industry - Environmental impact - Leaching;
D O I
10.1504/IJEWM.2008.021865
中图分类号
学科分类号
摘要
In Brazil, the growth of the petroleum industry has resulted in an increasing amount of toxic oily wastes that have a high environmental impact. This work analyses the possibility of recovering waste from the petroleum industry using the powder technology route to produce clay-based ceramics. Batches of clay-petroleum waste mixes with up to 20 wt.% waste were prepared. The results showed that the incorporation of petroleum waste influenced the technological properties of the fired pieces. Leaching tests have shown that the petroleum waste could be inertised within a clay ceramic fired at 1100C. In addition, petroleum waste containing pieces presented technological properties acceptable for application in clay-based ceramics. © 2008, Inderscience Publishers.
引用
收藏
页码:625 / 635
相关论文
共 50 条
  • [1] Incorporation of petroleum waxes in clay bricks
    De, Almeida, J.J.R.C. Valente
    De Carvalho Lucas, J.A.
    Industrial Ceramics, 1991, 11 (04):
  • [2] Valorization of Solid Petroleum Waste as a Potential Raw Material for Clay-Based Ceramics
    A. J. Souza
    B. C. A. Pinheiro
    J. N. F. Holanda
    Waste and Biomass Valorization, 2011, 2 : 381 - 388
  • [3] Valorization of Solid Petroleum Waste as a Potential Raw Material for Clay-Based Ceramics
    Souza, A. J.
    Pinheiro, B. C. A.
    Holanda, J. N. F.
    WASTE AND BIOMASS VALORIZATION, 2011, 2 (04) : 381 - 388
  • [4] Valorization of Mill Scale Waste by its Incorporation in Fired Clay Bricks
    Spiliotis, X.
    Ntampegliotis, K.
    Kasiteropoulou, D.
    Lamprakopoulos, S.
    Lolos, K.
    Karayannis, V.
    Papapolymerou, G.
    TRADITIONAL AND ADVANCED CERAMICS, 2014, 608 : 8 - +
  • [5] Chemical-Environmental Characterization of Waste Coming From Petroleum Industry for Application in Clay Ceramics
    Pinheiro, B. C. A.
    Holanda, J. N. F.
    ADVANCED POWDER TECHNOLOGY VII, 2010, 660-661 : 1053 - 1057
  • [6] Study of incorporation of clay montmorilonites in petroleum asphalt cement
    dos Santos, Karine Pereira
    de Figueiredo Lopes Lucena, Adriano Elisio
    de Figueiredo Lopes Lucena, Leda Christiane
    Almeida e Silva, Jose de Arimateia
    Farias do Egito Costa, Stephanny Conceicao
    MATERIA-RIO DE JANEIRO, 2015, 20 (02): : 501 - 513
  • [7] Incorporation of granite waste in red ceramics
    Vieira, CMF
    Soares, TM
    Sánchez, R
    Monteiro, SN
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 373 (1-2): : 115 - 121
  • [8] Refractory Ceramics of Clay and Alumina Waste
    da Silva, Valmir Jose
    Taveira, Salvador K. A.
    Silva, Karina R.
    Neves, Gelmires A.
    Lira, Helio L.
    Santana, Lisiane N. L.
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2021, 24 (02):
  • [9] INCORPORATION OF WASTE CERAMIC BLOCKS IN STRUCTURAL CERAMICS
    de Oliveira, Orley Magalhaes
    da Silva-Valenzuela, Maria das Gracas
    Bastos Andrade, Christiano Gianesi
    Munhoz Junior, Antonio Hortencio
    Valenzuela-Diaz, Francisco Rolando
    CHARACTERIZATION OF MINERALS, METALS, AND MATERIALS 2016, 2016, : 249 - 253
  • [10] STABILIZED PETROLEUM WASTE INTERACTION WITH SILTY CLAY SUBGRADE
    MARTIN, JP
    BIEHL, FJ
    ROBINSON, WT
    PETROLEUM CONTAMINATED SOILS, VOL 2, 1989, : 177 - 197