Effect of adding micro amount rare earthelementLaNd on mechanical property of Bi5Sb8Sn solder alloy

被引:0
|
作者
Li, Shuai [1 ]
Yan, Yanfu [1 ]
Feng, Lifang [1 ]
Zhao, Yongmeng [1 ]
机构
[1] College of Material Science and Engineering, Henan University of Science and Technology, Luoyang,471003, China
关键词
Rare earths - Microstructure - Neodymium alloys - Shear flow - Shear strength;
D O I
暂无
中图分类号
学科分类号
摘要
A new Bi5Sb8SnRE quaternary alloy was formed by adding different content of rare earthLa, Nd into Bi5Sb8Sn solder alloy to study the effect of its mechanical property and microstructure. The results shows that: The tensile strength and shear strengthreaches a maximum are 58.30 MPa and 15.50 MPa, compared with Bi5Sb8Sn matrix, in which increased by 44.17% and 57.0% respectivelywhen RE adds up to 0.2%. The Microscopic analysis shows that adding micro amount of RE could refine the microstructure. Meanwhile, more uniform microstructure, improvements of the mechanical properties were obtained with RE additon. However, the RE compounts are increased and the mechanical properties were decreased when the addition of RE more than 0.2wt.%.
引用
收藏
页码:9 / 12
相关论文
共 50 条
  • [1] Effect of adding micro amount rare earth element Er on mechanical property of Bi5Sb8Sn solder alloy
    Li Shuai
    Yan Yan-fu
    Jiu Yong-tao
    Wang Hong-na
    ADVANCED RESEARCH ON AUTOMATION, COMMUNICATION, ARCHITECTONICS AND MATERIALS, III, 2013, 738 : 30 - 33
  • [2] Effect of the Er on resistivity and spreading properties of Bi5Sb8Sn solder alloy
    Li, Shuai
    Yan, YanFu
    Feng, LiFang
    Wang, HongNa
    ADVANCED RESEARCH ON MATERIALS, APPLIED MECHANICS AND DESIGN SCIENCE, 2013, 327 : 147 - 150
  • [3] Effect of the LaNd Addition on Melting Point and Spreading Properties of Bi5Sb8Sn Solder Alloy
    Sheng Yang-yang
    Yan Yan-fu
    Han Cun-cang
    Tang Kun
    Zhao Kuai-le
    Xu Zhi-wei
    ADVANCED STRUCTURAL MATERIALS, 2011, 686 : 488 - +
  • [4] Effect of the content of Sn on microstructure and mechanical properties of Bi5Sb solder alloy
    Tang Kun
    Yan Yan-fu
    Zhao Kuai-le
    Sheng Yang-yang
    Feng Li-fang
    MECHANICAL ENGINEERING AND GREEN MANUFACTURING, PTS 1 AND 2, 2010, : 774 - 779
  • [5] Influence of Ni addition on the mechanical properties of Bi-5Sb-8Sn solder alloys
    Wang, W. L.
    Yan, Y. F.
    MATERIALS RESEARCH INNOVATIONS, 2015, 19 : 1102 - 1106
  • [6] Effect of content of Sn on spreading properties and tensile properties of Bi5Sb solder alloy
    Sheng, Yangyang
    Yan, Yanfu
    Tang, Kun
    Zhao, Kuaile
    Hanjie Xuebao/Transactions of the China Welding Institution, 2011, 32 (06): : 85 - 88
  • [7] Effect of the Content of Cu on Solderability and Mechanical Properties of Bi5Sb Solder Alloy
    Yan, Yanfu
    Feng, Lifang
    Guo, Xiaoxiao
    Tang, Kun
    Song, Kexing
    MATERIALS RESEARCH, PTS 1 AND 2, 2009, 610-613 : 537 - 541
  • [8] 微量稀土镧钕对Bi5Sb8Sn力学性能影响
    李帅
    闫焉服
    冯丽芳
    赵永猛
    焊接学报, 2014, 35 (07) : 9 - 12+113
  • [9] Effect of the Bi content on the mechanical properties of a Sn-Zn-Al-Bi solder alloy
    Soares, D
    Vilarinho, C
    Barbosa, J
    Silva, R
    Pinho, M
    Castro, F
    ADVANCED MATERIALS FORUM II, 2004, 455-456 : 307 - 311
  • [10] Tensile, creep and ABI tests on Sn5%Sb solder for mechanical property evaluation
    Murty, KL
    Haggag, FM
    Mahidhara, RK
    CREEP AND STRESS RELAXATION IN MINIATURE STRUCTURES AND COMPONENTS, 1996, : 191 - 204