Effect of adding micro amount rare earthelementLaNd on mechanical property of Bi5Sb8Sn solder alloy

被引:0
|
作者
Li, Shuai [1 ]
Yan, Yanfu [1 ]
Feng, Lifang [1 ]
Zhao, Yongmeng [1 ]
机构
[1] College of Material Science and Engineering, Henan University of Science and Technology, Luoyang,471003, China
关键词
Rare earths - Microstructure - Neodymium alloys - Shear flow - Shear strength;
D O I
暂无
中图分类号
学科分类号
摘要
A new Bi5Sb8SnRE quaternary alloy was formed by adding different content of rare earthLa, Nd into Bi5Sb8Sn solder alloy to study the effect of its mechanical property and microstructure. The results shows that: The tensile strength and shear strengthreaches a maximum are 58.30 MPa and 15.50 MPa, compared with Bi5Sb8Sn matrix, in which increased by 44.17% and 57.0% respectivelywhen RE adds up to 0.2%. The Microscopic analysis shows that adding micro amount of RE could refine the microstructure. Meanwhile, more uniform microstructure, improvements of the mechanical properties were obtained with RE additon. However, the RE compounts are increased and the mechanical properties were decreased when the addition of RE more than 0.2wt.%.
引用
收藏
页码:9 / 12
相关论文
共 50 条
  • [21] Effect of SiC Nanoparticles Dispersion on the Microstructure and Mechanical Properties of Electroplated Sn-Bi Solder Alloy
    Lee, C. W.
    Shin, Y. S.
    Yoo, S. H.
    JOURNAL OF NANO RESEARCH, 2010, 11 : 113 - 118
  • [22] Effect of electron flow on the microstructure and mechanical property of Cu/Sn-30Bi/Cu solder joint
    Lai, Zhongmin
    Kong, Xinda
    You, Qingrong
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2017, 28 (05) : 4506 - 4512
  • [23] Effect of electron flow on the microstructure and mechanical property of Cu/Sn–30Bi/Cu solder joint
    Zhongmin Lai
    Xinda Kong
    Qingrong You
    Journal of Materials Science: Materials in Electronics, 2017, 28 : 4506 - 4512
  • [24] The effect of Ge on the microstructure, thermal behavior, and mechanical properties of lead-free Sn-5Sb-0.7Cu solder alloy
    Hoda Pooshgan
    Homam Naffakh-Moosavy
    Journal of Materials Science: Materials in Electronics, 2023, 34 (1)
  • [25] The effect of Ge on the microstructure, thermal behavior, and mechanical properties of lead-free Sn5Sb-0.7Cu solder alloy
    Pooshgan, Hoda
    Naffakh-Moosavy, Homam
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2023, 34 (01)
  • [26] Effect of minor Sb addition on microstructure, interfacial behavior, and mechanical properties of Sn-15Bi solder joints
    Wang, Fengjiang
    Lv, Pengcheng
    Zhang, Jiayu
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2024, 35 (18)
  • [27] Indentation Creep of Lead-Free Sn-5Sb Solder Alloy with 1.5 wt% Ag and Bi Additions
    Geranmayeh, A. R.
    Mahmudi, R.
    Khalatbari, F.
    Kashi, N.
    Nayyeri, G.
    JOURNAL OF ELECTRONIC MATERIALS, 2014, 43 (03) : 717 - 723
  • [28] Microstructure and impression creep behavior of lead-free Sn-5Sb solder alloy containing Bi and Ag
    Geranmayeh, A. R.
    Nayyeri, G.
    Mahmudi, R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 547 : 110 - 119
  • [29] Effect of Zr-adding on microstructure and mechanical properties for Mg-5Sn alloy
    Sichuan University, Chengdu 610065, China
    不详
    不详
    Xiyou Jinshu Cailiao Yu Gongcheng, 2006, 12 (1912-1915):
  • [30] Indentation Creep of Lead-Free Sn-5Sb Solder Alloy with 1.5 wt% Ag and Bi Additions
    A.R. Geranmayeh
    R. Mahmudi
    F. Khalatbari
    N. Kashi
    G. Nayyeri
    Journal of Electronic Materials, 2014, 43 : 717 - 723