Effect of adding micro amount rare earthelementLaNd on mechanical property of Bi5Sb8Sn solder alloy

被引:0
|
作者
Li, Shuai [1 ]
Yan, Yanfu [1 ]
Feng, Lifang [1 ]
Zhao, Yongmeng [1 ]
机构
[1] College of Material Science and Engineering, Henan University of Science and Technology, Luoyang,471003, China
关键词
Rare earths - Microstructure - Neodymium alloys - Shear flow - Shear strength;
D O I
暂无
中图分类号
学科分类号
摘要
A new Bi5Sb8SnRE quaternary alloy was formed by adding different content of rare earthLa, Nd into Bi5Sb8Sn solder alloy to study the effect of its mechanical property and microstructure. The results shows that: The tensile strength and shear strengthreaches a maximum are 58.30 MPa and 15.50 MPa, compared with Bi5Sb8Sn matrix, in which increased by 44.17% and 57.0% respectivelywhen RE adds up to 0.2%. The Microscopic analysis shows that adding micro amount of RE could refine the microstructure. Meanwhile, more uniform microstructure, improvements of the mechanical properties were obtained with RE additon. However, the RE compounts are increased and the mechanical properties were decreased when the addition of RE more than 0.2wt.%.
引用
收藏
页码:9 / 12
相关论文
共 50 条
  • [31] Enhancing the ductility and mechanical behavior of Sn-1.0Ag-0.5Cu lead-free solder by adding trace amount of elements Ni and Sb
    Hammad, A. E.
    MICROELECTRONICS RELIABILITY, 2018, 87 : 133 - 141
  • [32] Effect of Zr-adding on microstructure and mechanical properties for Mg-5Sn alloy
    Liu Hongmei
    Chen Yungui
    Tang Yongbai
    Huang Deming
    Tu Mingjing
    Zhao Min
    Li Yiguo
    RARE METAL MATERIALS AND ENGINEERING, 2006, 35 (12) : 1912 - 1915
  • [33] Effect of Homogenization on the Indentation Creep of Cast Lead-Free Sn-5%Sb Solder Alloy
    R. Mahmudi
    A. R. Geranmayeh
    M. Allami
    M. Bakherad
    Journal of Electronic Materials, 2007, 36 : 1703 - 1710
  • [34] Effect of homogenization on the indentation creep of cast lead-free Sn-5%Sb solder alloy
    Mahmudi, R.
    Geranmayeh, A. R.
    Allami, M.
    Bakherad, M.
    JOURNAL OF ELECTRONIC MATERIALS, 2007, 36 (12) : 1703 - 1710
  • [35] Effect of cooling method and aging treatment on the microstructure and mechanical properties of Sn–10Bi solder alloy
    Zhongmin Lai
    Dan Ye
    Journal of Materials Science: Materials in Electronics, 2016, 27 : 1398 - 1407
  • [36] Effect of Bi Content on the Microstructure and Mechanical Performance of Sn-1Ag-0.5Cu Solder Alloy
    Zahran, Heba Y.
    Mahmoud, Ashraf S.
    Abd El-Rehim, Alaa F.
    CRYSTALS, 2021, 11 (03)
  • [37] Effect of cooling method and aging treatment on the microstructure and mechanical properties of Sn-10Bi solder alloy
    Lai, Zhongmin
    Ye, Dan
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2016, 27 (02) : 1398 - 1407
  • [38] Effect of adding Ni nanoparticles on the melting characteristics, mechanical properties and intermetallic compound growth of Sn58Bi solder
    Zhang, Jiamin
    Zhang, Liang
    Huang, Xi
    Wu, Chuanjiang
    Deng, Kai
    Long, Wei-Min
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2025, 37 (01) : 60 - 70
  • [39] Effect of Cu6Sn5 particles on microstructure formation and mechanical properties of Sn-58Bi solder
    Liu, Xiaoying
    Huang, Mingliang
    Zhao, Ning
    2012 13TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP 2012), 2012, : 422 - 424
  • [40] Effect of Bi on microstructure and mechanical properties of Sn-10Sb-1.5Cu (SSC1015) solder alloys
    Bi, Xiaoyang
    Hu, Xiaowu
    Li, Yulong
    Jiang, Xiongxin
    MATERIALS RESEARCH EXPRESS, 2019, 6 (02)