Study on tightening torque of thread forming screws

被引：0
|
作者：
机构：
[1] Suzuki, H.
来源：
Suzuki, H. | 1714年 / CRC Press/Balkema卷
关键词：
In this paper; the driving torque when driving thread forming screws in structural steel plates is measured from the start of driving until failure of the joint; and the target driving torque is investigated. An example of setting the target driving torque TT based on the penetration torque TP when the thread at the tip of a screw being driven into a steel plate penetrates through the plate and the failure torque TF when the joint fails; is presented. Although the number of cases studied here is limited; penetration torque TP and failure torque TF are obtained by using two types of steel plates (t = 4.5 mm; t = 6.0 mm) and two types of screw diameters (φ = 8 mm; φ; 12; mm); and the target driving torque values are calculated. © 2021 Taylor & Francis Group; London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
172353
引用
收藏
相关论文
共 50 条
  • [41] Cutting Flute and Thread Design on Self-Tapping Pedicle Screws Influence the Insertion Torque and Pullout Strength
    Wu, Lien-Chen
    Hsieh, Yueh-Ying
    Tsuang, Fon-Yih
    Kuo, Yi-Jie
    Chiang, Chang-Jung
    APPLIED SCIENCES-BASEL, 2022, 12 (04):
  • [42] Susceptibility of thread-forming screws made from stainless steels with relation to stress corrosion cracking
    Landgrebe, R.
    Gugau, M.
    Friederich, H.
    Materials and Corrosion, 2002, 53 (03) : 165 - 175
  • [43] Study on Heading and Thread-rolling Processes of Magnesium Alloy Screws
    Hwang, Yeong-Maw
    Hwang, Kai-Neng
    Chang, Chia-Yu
    ADVANCES IN ENGINEERING PLASTICITY XI, 2013, 535-536 : 322 - 325
  • [44] Susceptibility of thread-forming screws made from stainless steels with relation to stress corrosion cracking
    Landgrebe, R
    Gugau, M
    Friederich, H
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2002, 53 (03): : 165 - 175
  • [45] Preload from Tightening and Removal Torque
    Hess, D. P.
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2019, 19 (04) : 1055 - 1066
  • [46] Preload from Tightening and Removal Torque
    D. P. Hess
    Journal of Failure Analysis and Prevention, 2019, 19 : 1055 - 1066
  • [47] TORQUE TIGHTENING - BASIS FOR INTERNATIONAL COMPETITION
    WEIMER, GA
    IRON AGE, 1985, 228 (06): : 44 - 46
  • [48] Investigation into Thread Rolling Characteristics of Subminiature Screws According to Thread Shapes
    Lee, Ji Eun
    Kim, Jong Bong
    Park, Keun
    Ra, Seung Woo
    TRANSACTIONS OF THE KOREAN SOCIETY OF MECHANICAL ENGINEERS A, 2016, 40 (11) : 971 - 978
  • [49] Fixation stability comparison of bone screws based on thread design: buttress thread, triangle thread, and square thread
    Feng, Xiaoreng
    Luo, Zhaopei
    Li, Yupeng
    Yao, Yiyi
    Qi, Weichen
    Chen, Bin
    Liang, Hongfeng
    BMC MUSCULOSKELETAL DISORDERS, 2022, 23 (01)
  • [50] In vitro test: Tightening of implant superstructures' differents screws
    Tomaghelli, CA
    Kitrilakis, AE
    Luchetti, CG
    JOURNAL OF DENTAL RESEARCH, 2000, 79 (05) : 1034 - 1034
12345