Study on tightening torque of thread forming screws

被引：0
|
作者：
机构：
[1] Suzuki, H.
来源：
Suzuki, H. | 1714年 / CRC Press/Balkema卷
关键词：
In this paper; the driving torque when driving thread forming screws in structural steel plates is measured from the start of driving until failure of the joint; and the target driving torque is investigated. An example of setting the target driving torque TT based on the penetration torque TP when the thread at the tip of a screw being driven into a steel plate penetrates through the plate and the failure torque TF when the joint fails; is presented. Although the number of cases studied here is limited; penetration torque TP and failure torque TF are obtained by using two types of steel plates (t = 4.5 mm; t = 6.0 mm) and two types of screw diameters (φ = 8 mm; φ; 12; mm); and the target driving torque values are calculated. © 2021 Taylor & Francis Group; London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
172353
引用
收藏
相关论文
共 50 条
  • [21] Optimal control of screwing speed in assembly with thread-forming screws
    Roman Chumakov
    The International Journal of Advanced Manufacturing Technology, 2008, 36 : 395 - 400
  • [22] Optimal control of screwing speed in assembly with thread-forming screws
    Chumakov, Roman
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 36 (3-4): : 395 - 400
  • [23] Tightening the Screws on PsbA in Cyanobacteria
    Srivastava, Amit
    Shukla, Pratyoosh
    TRENDS IN GENETICS, 2021, 37 (03) : 211 - 215
  • [24] An artificial neural network for fault detection in the assembly of thread-forming screws
    Chumakov, Roman
    JOURNAL OF INTELLIGENT MANUFACTURING, 2008, 19 (03) : 327 - 333
  • [25] An artificial neural network for fault detection in the assembly of thread-forming screws
    Roman Chumakov
    Journal of Intelligent Manufacturing, 2008, 19 : 327 - 333
  • [26] Thread Forming in Lightweight Material Joints Using Self-Tapping Screws
    Wu, Zhijun
    Nassar, Sayed A.
    Jagatap, Shraddha
    Satav, Kshitij
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2016, 138 (09):
  • [27] Study on Auto Thread Inspection Torque
    Yao, Yu
    Cui, Yu-shu
    Cao, Xiao-gen
    Hao, Jian-jun
    CHINA FUNCTIONAL MATERIALS TECHNOLOGY AND INDUSTRY FORUM, 2013, 320 : 727 - +
  • [28] STUDY ON VIBRATION SCREW TIGHTENING - HOW ACCURACY OF SCREWS IS DEPENDS ON
    HORI, R
    ISHIKAWA, K
    YOKOYAMA, Y
    BULLETIN OF THE JAPAN SOCIETY OF PRECISION ENGINEERING, 1985, 19 (04): : 292 - 293
  • [29] EFFECT OF NUMBER OF ROLLERS IN THREAD ROLLING HEADS ON FORMING PRESSURE AND TORQUE
    KIRPICHNIKOV, FP
    BYKASOV, VI
    RUSSIAN ENGINEERING JOURNAL, 1977, 57 (10): : 48 - 50
  • [30] Loosening torque of Universal Abutment screws after cyclic loading: influence of tightening technique and screw coating
    Bacchi, Atais
    Regalin, Alexandre
    Brilhante Bhering, Claudia Lopes
    Alessandretti, Rodrigo
    Spazzin, Aloisio Oro
    JOURNAL OF ADVANCED PROSTHODONTICS, 2015, 7 (05): : 375 - 379
12345