Study on tightening torque of thread forming screws

被引：0
|
作者：
机构：
[1] Suzuki, H.
来源：
Suzuki, H. | 1714年 / CRC Press/Balkema卷
关键词：
In this paper; the driving torque when driving thread forming screws in structural steel plates is measured from the start of driving until failure of the joint; and the target driving torque is investigated. An example of setting the target driving torque TT based on the penetration torque TP when the thread at the tip of a screw being driven into a steel plate penetrates through the plate and the failure torque TF when the joint fails; is presented. Although the number of cases studied here is limited; penetration torque TP and failure torque TF are obtained by using two types of steel plates (t = 4.5 mm; t = 6.0 mm) and two types of screw diameters (φ = 8 mm; φ; 12; mm); and the target driving torque values are calculated. © 2021 Taylor & Francis Group; London;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
172353
引用
收藏
相关论文
共 50 条
  • [31] Tips on implant screws tightening - an overview
    Moreira, A.
    Batista, R.
    Oliveira, S.
    Ferras, P.
    Gois, F.
    Reis Campos, J. C.
    BIODENTAL ENGINEERING V, 2019, : 259 - 262
  • [32] CALCULATION METHODS FOR THE JOINING OF PLASTICS PARTS BY THREAD-FORMING METAL SCREWS.
    Ehrenstein, G.W.
    Onasch, J.
    Kunststoffe - German Plastics, 1982, 72 (11): : 17 - 19
  • [33] Tightening the screws on human subjects protection
    Tilden, V
    NURSING RESEARCH, 2001, 50 (04) : 193 - 193
  • [34] REPRODUCIBILITY OF THREAD-FORMING TESTS IN THE FALEX TAPPING-TORQUE MACHINE
    HOLODNIK, E
    WEBB, TH
    LUBRICATION ENGINEERING, 1983, 39 (09): : 570 - 576
  • [35] STUDY ON VIBRATION SCREW THREAD TIGHTENING BY MEANS OF PNEUMATIC CONTROL.
    Ishikawa, Ken-ichi
    Hori, Ryuichi
    Suwabe, Hitoshi
    Yokoyama, Yasuo
    Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1987, 53 (486): : 466 - 470
  • [36] Tightening up torque standards
    不详
    AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 2007, 79 (05): : 536 - 536
  • [37] An approach to torque and temperature thread by thread on tapping
    Igor Cézar Pereira
    Pedro Ivo Vianello
    Denis Boing
    Gilmar Guimarães
    Marcio Bacci da Silva
    The International Journal of Advanced Manufacturing Technology, 2020, 106 : 4891 - 4901
  • [38] TIGHTENING THE SCREWS ON DIRECTORS: CARE, DELEGATION AND RELIANCE
    Golding, Greg
    UNIVERSITY OF NEW SOUTH WALES LAW JOURNAL, 2012, 35 (01): : 266 - 290
  • [39] An approach to torque and temperature thread by thread on tapping
    Pereira, Igor Cezar
    Vianello, Pedro Ivo
    Boing, Denis
    Guimaraes, Gilmar
    da Silva, Marcio Bacci
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 106 (11-12): : 4891 - 4901
  • [40] Control of influence of a thread on a bending of screws
    Proskuriakov, N. E.
    Lopa, I. V.
    Trapeznikov, E. V.
    MECHANICAL SCIENCE AND TECHNOLOGY UPDATE, 2017, 2017, 858
12345