Fabrication of 3D Nextel™ 720/Mullite at low temperature

被引：0
|
作者：
Zhang, Fu-Ping [1 ]
Chen, Zhao-Feng [1 ]
Zhang, Li-Tong [1 ]
Cheng, Lai-Fei [1 ]
Xu, Yong-Dong [1 ]
机构：
[1] State Key Lab. Solidification Proc., NW Polytechnical University, Xi'an 710072, China
来源：
Hangkong Cailiao Xuebao/Journal of Aeronautical Materials | 2002年 / 22卷 / 02期
关键词：
Fracture toughness - Infiltration - Pyrolysis - Strength of materials;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
3D Nextel™ 720/Mullite composites were fabricated by precursor infiltration pyrolysis method. Influence of the matrix component control, the dense of composite and the treating temperature on the fracture strength of composites was studied. The results indicted that the dense composite were obtained by using the mixture of TEOS(Si(OC2 H5)4) and aluminum-s-butoxide (Al (OC3 H7)3) as precursor through cycle infiltration at relative low temperature(&le 1200°C).
引用
收藏
页码：33 / 36
相关论文
共 50 条
  • [1] Preparation and microstructure of nextel 720/mullite-corundum composite
    Chen, Z
    Zhang, L
    Cheng, L
    Xu, Y
    COMPOSITE MATERIALS III, 2003, 249 : 25 - 29
  • [2] MULLITE CERAMIC FABRICATION BY 3D PRINTING
    Lee, Ruey-Tsung
    Cheng, Wei-Seng
    Lee, Ching-Sheng
    Lin, Fang-Fei
    Liu, Fwu-Hsing
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN (M2D2017), 2017, : 779 - 784
  • [3] Processing of Nextel™ 720/mullite composition composite using electrophoretic deposition
    Kooner, S
    Westby, WS
    Watson, CMA
    Farries, PM
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2000, 20 (05) : 631 - 638
  • [4] Processing of Nextel 720/mullite composition composite using electrophoretic deposition
    Westby, WS
    Kooner, S
    Farries, PM
    Boother, P
    Shatwell, RA
    JOURNAL OF MATERIALS SCIENCE, 1999, 34 (20) : 5021 - 5031
  • [5] Processing of Nextel 720/mullite composition composite using electrophoretic deposition
    W. S. Westby
    S. Kooner
    P. M. Farries
    P. Boother
    R. A. Shatwell
    Journal of Materials Science, 1999, 34 : 5021 - 5031
  • [6] Mullite (Nextel™ 720) fibre-reinforced mullite matrix composites exhibiting favourable thermomechanical properties
    Kaya, C
    Butler, EG
    Selcuk, A
    Boccaccini, AR
    Lewis, MH
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2002, 22 (13) : 2333 - 2342
  • [7] Fabrication of computationally designed scaffolds by low temperature 3D printing
    Castilho, Miguel
    Dias, Marta
    Gbureck, Uwe
    Groll, Juergen
    Fernandes, Paulo
    Pires, Ines
    Gouveia, Barbara
    Rodrigues, Jorge
    Vorndran, Elke
    BIOFABRICATION, 2013, 5 (03)
  • [8] Processing, microstructure and properties of Nextel™ 610, 650 and 720 fiber/porous mullite matrix composites
    Kanka, BJ
    Göring, J
    Schmücker, M
    Schneider, H
    25TH ANNUAL CONFERENCE ON COMPOSITES, ADVANCED CERAMICS, MATERIALS, AND STRUCTURES: A, 2001, 22 (03): : 703 - 710
  • [9] Fatigue behavior of a Nextel™ 720/alumina (N720/A) composite at room and elevated temperature
    Steel, SG
    Zawada, LP
    Mall, S
    25TH ANNUAL CONFERENCE ON COMPOSITES, ADVANCED CERAMICS, MATERIALS, AND STRUCTURES: A, 2001, 22 (03): : 695 - 702
  • [10] EFFECTS OF ENVIRONMENT ON CREEP BEHAVIOR OF NEXTEL™720/ALUMINA-MULLITE CERAMIC COMPOSITE AT 1200°C
    Genelin, C. L.
    Ruggles-Wrenn, M. B.
    PROCESSING AND PROPERTIES OF ADVANCED CERAMICS AND COMPOSITES, 2009, 203 : 193 - 203
12345