Microstructure and mechanical properties of C/C composite joint brazed with Ni-based filler

被引：1

作者：

PENG H.-L. ^{[1
,2
]}

ZHANG Y.-X. ^{[3
]}

CHEN X. ^{[1
,2
]}

ZHANG H.-Q. ^{[3
]}

XUE J.-L. ^{[3
]}

GUO W. ^{[3
]}

机构：

[1] Shanghai Spaceflight Precision Machinery Institute, Shanghai

[2] Shanghai Engineering Technology Research Center of Near-net Shape Forming for Metallic Materials, Shanghai

[3] School of Mechanical Engineering and Automation, Beihang University, Beijing

来源：

Transactions of Nonferrous Metals Society of China (English Edition) | 2022年 / 32卷 / 03期

基金：

中国国家自然科学基金;

关键词：

brazing; C/C composites; microstructure; shear strength;

D O I：

10.1016/S1003-6326(22)65843-6

中图分类号：

学科分类号：

摘要：

The novel Ni-based brazing filler was used to join C/C composites. When brazing temperature increased from 1080 to 1100 °C, the wetting angle decreased from 23° to 14°, and the brazing filler had good wettability on the surface of C/C composites. The brazing seam of the brazed joint consisted of Ni(s,s) and Cr3C2 phases. As brazing temperature increased, lots of Cr3C2 phases were generated at the bonding interface, and the thick reaction layer was formed. When brazing temperature was 1120 °C, the shear strength of C/C joint reached the maximum value of 31.5 MPa. The fracture path extended in the C/C matrix close to the bonding interface. © 2022 The Nonferrous Metals Society of China

引用

页码：927 / 934

页数：7

共 50 条

[41] Microstructure evolution and mechanical properties of Ti2AlNb-C/C joints brazed with Ag-Cu filler
Xu, Jingxin
Zhou, Wenlong
Song, Xiaoguo
Fu, Wei
Song, Yanyu
Long, Fei
Hu, Shengpeng
MATERIALS TODAY COMMUNICATIONS, 2025, 43
[42] Interfacial microstructure and mechanical properties of TiAl and C/SiC joint brazed with TiH2-Ni-B brazing powder
Yang, Zhenwen
Zhang, LiXia
Tian, Xiaoyu
Liu, Yuzhang
He, Peng
Peng, Jicai
MATERIALS CHARACTERIZATION, 2013, 79 : 52 - 59
[43] Microstructure evolution and mechanical behavior of Ni-based single crystal superalloy joint brazed with mixed powder at elevated temperature
Wang, Guanglei
Sun, Yuan
Wang, Xinguang
Liu, Jide
Liu, Jinlai
Li, Jinguo
Yu, Jinjiang
Zhou, Yizhou
Jin, Tao
Sun, Xudong
Sun, Xiaofeng
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2017, 33 (10) : 1219 - 1226
[44] MICROSTRUCTURE AND MECHANICAL PROPERTIES OF WELDING JOINT OF A NEW CORROSION RESISTANT Ni-BASED ALLOY
Zhao Xia
Liu Yang
Zha Xiangdong
Cheng Leming
Ma Yingche
Liu Kui
ACTA METALLURGICA SINICA, 2014, 50 (11) : 1377 - 1383
[45] Microstructures and mechanical properties of Ti3Al/Ni-based superalloy joints brazed with AuNi filler metal
H.S.Ren
H.P.Xiong
W.M.Long
B.Chen
Y.X.Shen
S.J.Pang
JournalofMaterialsScience&Technology, 2019, 35 (09) : 2070 - 2078
[46] Microstructure and Mechanical Properties of SiC Joint Brazed by Al-Ti Alloys as Filler Metal
Xu Puhao
Zhang Xiangzhao
Liu Guiwu
Zhang Mingfen
Gui Xinyi
Qiao Guanjun
JOURNAL OF INORGANIC MATERIALS, 2022, 37 (06) : 683 - +
[47] MICROSTRUCTURE AND MECHANICAL PROPERTIES OF(Nb,Ti)C-Ni COMPOSITE
蔡克峰
南策文
袁润章
叶能
JournalofWuhanUniversityofTechnology-MaterialsScience, 1994, (03) : 15 - 18
[48] Microstructure and mechanical properties of welding joint of a new corrosion resistant Ni-based alloy
Zhao, Xia
Liu, Yang
Zha, Xiangdong
Cheng, Leming
Ma, Yingche
Liu, Kui
Jinshu Xuebao/Acta Metallurgica Sinica, 2014, 50 (11): : 1377 - 1383
[49] Microstructure and Properties of 2D C/SiC Composite/GH783 Joint Brazed with Cu-Ti plus Mo Composite Filler
Wang Xing
Cheng Laifei
Fan Shangwu
Zhang Litong
RARE METAL MATERIALS AND ENGINEERING, 2012, 41 (09) : 1544 - 1548
[50] Composite brazing of C/C composite and Ni-based superalloy using (Ag-10Ti)+TiC filler material
Wang, Yonglei
Wang, Wanli
Huang, Jihua
Zhou, Shuanbao
Yang, Jian
Chen, Shuhai
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2021, 288

← 1 2 3 4 5 →