Elekta Hounsfield Unit Calibration and 3D Printed Phantom for CBCT-Based Dose

被引：0
|
作者：
Baron, June Cheng [1 ]
Neath, Catherine [1 ]
机构：
[1] Durham Reg Canc Ctr, Oshawa, ON, Canada
来源：
MEDICAL PHYSICS | 2024年 / 51卷 / 08期
关键词：
D O I：
暂无
中图分类号：
R8 [特种医学]; R445 [影像诊断学];
学科分类号：
1002 ; 100207 ; 1009 ;
摘要：
27
引用
收藏
页码：5813 / 5814
页数：2
相关论文
共 50 条
  • [21] Change in Image Quality According to the 3D Locations of a CBCT Phantom
    Hwang, Jae Joon
    Park, Hyok
    Jeong, Ho-Gul
    Han, Sang-Sun
    PLOS ONE, 2016, 11 (04):
  • [22] CBCT-Based Image Guidance for Percutaneous Access: Electromagnetic Navigation Versus 3D Image Fusion with Fluoroscopy Versus Combination of Both Technologies-A Phantom Study
    Tacher, Vania
    Blain, Maxime
    Herin, Edouard
    Vitellius, Manuel
    Chiaradia, Melanie
    Oubaya, Nadia
    Derbel, Haytham
    Kobeiter, Hicham
    CARDIOVASCULAR AND INTERVENTIONAL RADIOLOGY, 2020, 43 (03) : 495 - 504
  • [23] Assessing CBCT-based patient positioning accuracy on the Gamma Knife Icon™ via Presage® 3D absolute dosimetry
    Xu, Andy Y.
    Wang, Yi-Fang
    Admovics, John
    Wuu, Cheng-Shie
    10TH INTERNATIONAL CONFERENCE ON 3D RADIATION DOSIMETRY (IC3DDOSE), 2019, 1305
  • [24] 3D printed phantom for high frequency ultrasound imaging
    Jacquet, Jean-Rene
    Levassort, Franck
    Ossant, Frederic
    Gregoire, Jean-Marc
    2015 IEEE INTERNATIONAL ULTRASONICS SYMPOSIUM (IUS), 2015,
  • [25] WLAN Antenna on 3D Printed Bracelet and Wrist Phantom
    Sanz-Izquierdo, B.
    Jun, Sungyun
    2014 LOUGHBOROUGH ANTENNAS AND PROPAGATION CONFERENCE (LAPC), 2014, : 372 - 375
  • [26] A 3D printed phantom to assess MRI geometric distortion
    Ramachandran, Prabhakar
    Noble, Christopher
    Langton, Christian
    Perrett, Ben
    Cox, Joshua
    Chapman, Mike
    McGill, George
    BIOMEDICAL PHYSICS & ENGINEERING EXPRESS, 2021, 7 (03):
  • [27] Development and validation of a 3D anthropomorphic phantom for dental CBCT imaging research
    Merken, Karen
    Monnens, Janne
    Marshall, Nicholas
    Johan, Nuyts
    Brasil, Danieli Moura
    Santaella, Gustavo Machado
    Politis, Constantinus
    Jacobs, Reinhilde
    Bosmans, Hilde
    MEDICAL PHYSICS, 2023, 50 (11) : 6714 - 6736
  • [28] Evaluation of 3D printing filaments for construction of a pediatric phantom for dosimetry in CBCT
    Fontes Assemany, Ladyjane Pereira
    Rodrigues Junior, Orlando
    da Silva, Ezequiel
    Potiens, Maria da Penha A.
    RADIATION PHYSICS AND CHEMISTRY, 2020, 167
  • [29] 3D dose reconstruction on CBCT for daily monitoring of delivered patient dose
    Eilertsen, K.
    Vidaurre, F. C.
    Pylypchenko, Y.
    RADIOTHERAPY AND ONCOLOGY, 2017, 123 : S778 - S779
  • [30] Monte Carlo modeling and simulation of a new 3D printed phantom for WBC calibration with ballistic gel as a tissue substitute
    de Andrade, Ester Maria Rodrigues
    Paixao, Lucas
    Mendes, Bruno Melo
    Fonseca, Telma Cristina Ferreira
    APPLIED RADIATION AND ISOTOPES, 2025, 215
12345