Experimental and numerical study of a woven oxide/oxide ceramic matrix composite adhesive joint using four-point bending test

被引：2
|
作者：
Vandellos, T. [1 ]
Malenfant, J. -C. [1 ]
Le Breton, C. [1 ]
机构：
[1] Safran Ceram, Technol Plateform Safran Tech, Rue Touban BP90053, F-33185 Le Haillan, France
来源：
23 EUROPEAN CONFERENCE ON FRACTURE, ECF23 | 2022年 / 42卷
关键词：
woven ceramic matrix composite; bonding; modeling; continuum damage model; cohesive zone model;
D O I：
10.1016/j.prostr.2022.12.005
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Oxide/oxide ceramic matrix composite materials are now used for applications in hot part of engines. To manufacture some components bonding techniques could be used. In order to understand the possible damage mechanisms of adhesive joint with CMC materials, experimental and numerical analysis using a four-point bending test is presented here. The numerical studies are performed using a continuum damage model for the behavior of the substrate and a cohesive zone model for the behavior of the interface between the composite and the bond. The results of the simulations are presented and discussed.
引用
收藏
页码：50 / 57
页数：8
相关论文
共 50 条
  • [41] Crack propagation characterisation of bituminous mixtures using a four-point bending notched specimen test
    Mai Lan Nguyen
    Di Benedetto, Herve
    Sauzeat, Cedric
    ROAD MATERIALS AND PAVEMENT DESIGN, 2016, 17 (01) : 70 - 86
  • [42] Highly Reliable Four-Point Bending Test Using Stealth Dicing Method for Adhesion Evaluation
    Yang, Yi-Lun
    Liu, Jia-Ling
    Chen, Guan Wei
    Kodama, Shoichi
    Kobinata, Kyosuke
    Chen, Kuan-Neng
    Ito, Hiroyuki
    Kim, Young Suk
    Ohba, Takayuki
    2019 INTERNATIONAL CONFERENCE ON ELECTRONICS PACKAGING (ICEP 2019), 2019, : 28 - 31
  • [43] Experimental and numerical study of the bolt reinforcement of a composite-to-steel butt-joint under three-point bending test
    Kharghani, N.
    Guedes Soares, C.
    Tsouvalis, N. G.
    MARINE STRUCTURES, 2019, 63 : 384 - 403
  • [44] The effects of woven fabric Kenaf FRP plates flexural strengthened on plain concrete beam under a four-point bending test
    Omar, Zaim
    Sugiman, Sugiman
    Yussof, Mustafasanie M.
    Ahmad, Hilton
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2022, 17
  • [45] EVALUATION OF DUPLEX STEEL RESISTANCE TO SULFIDE STRESS CRACKING USING TENSILE TEST AND FOUR-POINT BENDING TEST
    Jonsta, Petr
    Sojka, Jaroslav
    Matocha, Karel
    Konecna, Katerina
    Jonsta, Zdenek
    21ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2012), 2012, : 576 - 581
  • [46] Experimental study on four-point cyclic bending behaviours of concrete with high density polyethylene granules
    Chen, Yuzhi
    Xu, Lingyu
    Xuan, Weihong
    Zhou, Zan
    CONSTRUCTION AND BUILDING MATERIALS, 2019, 201 : 691 - 701
  • [47] Mode-II fracture behavior evaluation for adhesively bonded pultruded GFRP/steel joint using four-point bending test
    Jiang, Zhengwen
    Fang, Zhi
    Wan, Shui
    Xie, Kaizhong
    THIN-WALLED STRUCTURES, 2021, 167
  • [48] Bayesian calibration of continuum damage model parameters for an oxide-oxide ceramic matrix composite using inhomogeneous experimental data
    Generale, Adam P.
    Hall, Richard B.
    Brockman, Robert A.
    Joseph, V. Roshan
    Jefferson, George
    Zawada, Larry
    Pierce, Jennifer
    Kalidindi, Surya R.
    MECHANICS OF MATERIALS, 2022, 175
  • [49] Experimental and numerical investigation on failure of PVC foam core tapered sandwich composites under four-point bending
    Kashani, Hamid Babaee
    Shariati, Mahmoud
    Tahani, Masoud
    Zamani, Pedram
    ENGINEERING FAILURE ANALYSIS, 2025, 173
  • [50] Experimental tests and numerical simulations of ultimate strength on acid etching tempered glass under four-point bending
    Wu, Xiufeng
    Li, Longfei
    Wang, Bo
    STRUCTURES, 2023, 53 : 1530 - 1539
12345