Experimental and numerical study of the bolt reinforcement of a composite-to-steel butt-joint under three-point bending test

被引：18

作者：

Kharghani, N. ^{[1
]}

Guedes Soares, C. ^{[1
]}

Tsouvalis, N. G. ^{[2
]}

机构：

[1] Univ Lisbon, Inst Super Tecn, Ctr Marine Technol & Ocean Engn CENTEC, Lisbon, Portugal

[2] Natl Tech Univ Athens, Sch Naval Architecture & Marine Engn, Shipbldg Technol Lab, Athens, Greece

来源：

MARINE STRUCTURES | 2019年 / 63卷

关键词：

Composite-to-steel joints; Three-point bending test; Bolted joint; Bonded butt-joint; MECHANICAL-BEHAVIOR; OPTIMIZATION;

D O I：

10.1016/j.marstruc.2018.08.009

中图分类号：

U6 [水路运输]; P75 [海洋工程];

学科分类号：

0814 ; 081505 ; 0824 ; 082401 ;

摘要：

The behaviour of a hybrid bonded butt-joint, comprised of a double lap steel-GFRP and a GFRP sandwich composite part under three-point bending load is analysed through both numerical and experimental studies. The geometry of the joint is typical for marine applications and two possibilities of steel-to-composite connection are investigated: non-bolted and bolted. Deflection under the load point and strains at various locations of the joint were monitored and also numerically calculated. The tests revealed that the bolts used to connect the skin to steel do not have a remarkable effect on the joints capacity and stiffness in bending conditions. The numerical models can contribute to predict the structural response of the joint up to the loading at which debonding initiates and also the failure location.

引用

页码：384 / 403

页数：20

共 50 条

[1] Experimental and numerical study of a composite-to-steel joint under bending and torsion loads
Kharghani, Navid
Alizadeh, Fatemeh
Soares, C. Guedes
Tsouvalis, Nicholas G.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART M-JOURNAL OF ENGINEERING FOR THE MARITIME ENVIRONMENT, 2019, 233 (03) : 722 - 734
[2] Design improvement of a composite-to-steel butt-joint based on finite element analysis
Xu, Lin
Kharghani, Navid
Li, Mengzhen
Soares, C. Guedes
OCEAN ENGINEERING, 2021, 238
[3] Failure and optimization of composite-to-steel adhesive bonded Y-joints under three-point bending
He, Wentao
Qi, Yu
Wu, Jun
Yan, Xiaoshun
Fu, Haoxuan
Feng, Liang
Ocean Engineering, 2024, 314
[4] Flexural behaviour prediction of a conventional composite-to-steel butt-joint of ships using layerwise HSDT
Kharghani, N.
Guedes Soares, C.
TRENDS IN THE ANALYSIS AND DESIGN OF MARINE STRUCTURES, 2019, 2 : 369 - 375
[5] Numerical Analysis on the Butt-Joint under Izod Impact Test
Zheng, Xiaoling
Wu, Ling
You, Min
Liu, Kai
Li, Mei
PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3, 2013, 602-604 : 2279 - 2282
[6] Three-point bending test of pantographic blocks: numerical and experimental investigation
Yildizdag, M. Erden
Barchiesi, Emilio
dell'Isola, Francesco
MATHEMATICS AND MECHANICS OF SOLIDS, 2020, 25 (10) : 1965 - 1978
[7] Experimental and numerical analysis of a biodegradable hybrid composite under tensile and three-point bending tests
Beigpour, Reza
Shokrollahi, Hassan
Khalili, S. Mohammad Reza
COMPOSITE STRUCTURES, 2021, 273
[8] Experimental and Numerical Analysis of Progressive Damage of SiCf/SiC Composite under Three-Point Bending
Li, Xiang
Luo, Ruiying
CRYSTALS, 2022, 12 (05)
[9] Experimental and numerical modelling of sandstone bending using modified three-point test
Gui, Y.
Zhao, G.
Khalili, N.
ROCK DYNAMICS AND APPLICATIONS - STATE OF THE ART, 2013, : 389 - 394
[10] On the mechanical performance and damage evolution of rivet-bonded composite T-joint under three-point bending: A combined experimental and numerical study
Hou, Wenbin
Liu, Zhifeng
Shi, Jinjiang
Han, Xiao
THIN-WALLED STRUCTURES, 2023, 186

← 1 2 3 4 5 →