Experimental and numerical study of the bolt reinforcement of a composite-to-steel butt-joint under three-point bending test

被引：18

作者：

Kharghani, N. ^{[1
]}

Guedes Soares, C. ^{[1
]}

Tsouvalis, N. G. ^{[2
]}

机构：

[1] Univ Lisbon, Inst Super Tecn, Ctr Marine Technol & Ocean Engn CENTEC, Lisbon, Portugal

[2] Natl Tech Univ Athens, Sch Naval Architecture & Marine Engn, Shipbldg Technol Lab, Athens, Greece

来源：

MARINE STRUCTURES | 2019年 / 63卷

关键词：

Composite-to-steel joints; Three-point bending test; Bolted joint; Bonded butt-joint; MECHANICAL-BEHAVIOR; OPTIMIZATION;

D O I：

10.1016/j.marstruc.2018.08.009

中图分类号：

U6 [水路运输]; P75 [海洋工程];

学科分类号：

0814 ; 081505 ; 0824 ; 082401 ;

摘要：

The behaviour of a hybrid bonded butt-joint, comprised of a double lap steel-GFRP and a GFRP sandwich composite part under three-point bending load is analysed through both numerical and experimental studies. The geometry of the joint is typical for marine applications and two possibilities of steel-to-composite connection are investigated: non-bolted and bolted. Deflection under the load point and strains at various locations of the joint were monitored and also numerically calculated. The tests revealed that the bolts used to connect the skin to steel do not have a remarkable effect on the joints capacity and stiffness in bending conditions. The numerical models can contribute to predict the structural response of the joint up to the loading at which debonding initiates and also the failure location.

引用

页码：384 / 403

页数：20

共 50 条

[41] Influence of polymer flexible joint on concrete beams in three-point bending test
Zdanowicz, Lukasz
Kwiecień, Arkadiusz
Engineering Transactions, 2015, 63 (04): : 397 - 406
[42] Numerical Prediction of Three-Point Bending of Braided Composite Tubes With Axial Yarns
Liu, Yisheng
Li, Jianhui
Wu, Zhenyu
Chen, Xiaohan
APPLIED COMPOSITE MATERIALS, 2024, 31 (02) : 645 - 667
[43] Numerical Prediction of Three-Point Bending of Braided Composite Tubes With Axial Yarns
Yisheng Liu
Jianhui Li
Zhenyu Wu
Xiaohan Chen
Applied Composite Materials, 2024, 31 : 645 - 667
[44] Numerical correction of Weibull function's nomogram for three-point bending test
Elgueta, M
ENGINEERING FRACTURE MECHANICS, 2003, 70 (11) : 1467 - 1470
[45] Mathematical Simulation of Nonlinear Problem of Three-Point Composite Sample Bending Test
Badriev, I. B.
Makarov, M. V.
Paimushin, V. N.
2ND INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING (ICIE-2016), 2016, 150 : 1056 - 1062
[46] Analysis of the fracture response of anchored rock under three-point bending from experimental and numerical perspectives
Su, Haijian
Zhang, Luqing
Yu, Liyuan
Jiang, Ying
Feng, Xihui
Huang, Xiang
Theoretical and Applied Fracture Mechanics, 2024, 134
[47] Three-point bending test investigation and numerical analyses of composite stiffened panels with “ex-situ” toughen
Wang W.
Chen P.
Li N.
Chen, Puhui (phchen@nuaa.edu.cn), 1600, Beijing University of Aeronautics and Astronautics (BUAA) (33): : 2500 - 2509
[48] Experimental investigation and numerical simulation of three-point bending fatigue of 3D orthogonal woven composite
Sun, Baozhong
Niu, Zhilin
Jin, Limin
Zhang, Yan
Gu, Bohong
JOURNAL OF THE TEXTILE INSTITUTE, 2012, 103 (12) : 1312 - 1327
[49] Numerical Analysis of Sandwich Beam with Corrugated Core under Three-point Bending
Wittenbeck, Leszek
Grygorowicz, Magdalena
Paczos, Piotr
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE OF NUMERICAL ANALYSIS AND APPLIED MATHEMATICS 2014 (ICNAAM-2014), 2015, 1648
[50] Numerical modeling of crack propagation in rocks under the condition of three-point bending
Zhu, Wan-Cheng
Tang, Chun-An
Yang, Tian-Hong
Zhang, Zhe
2002, Northeastern University (23): : 592 - 595

← 1 2 3 4 5 →