Experimental and numerical study of a woven oxide/oxide ceramic matrix composite adhesive joint using four-point bending test

被引：2
|
作者：
Vandellos, T. [1 ]
Malenfant, J. -C. [1 ]
Le Breton, C. [1 ]
机构：
[1] Safran Ceram, Technol Plateform Safran Tech, Rue Touban BP90053, F-33185 Le Haillan, France
来源：
23 EUROPEAN CONFERENCE ON FRACTURE, ECF23 | 2022年 / 42卷
关键词：
woven ceramic matrix composite; bonding; modeling; continuum damage model; cohesive zone model;
D O I：
10.1016/j.prostr.2022.12.005
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Oxide/oxide ceramic matrix composite materials are now used for applications in hot part of engines. To manufacture some components bonding techniques could be used. In order to understand the possible damage mechanisms of adhesive joint with CMC materials, experimental and numerical analysis using a four-point bending test is presented here. The numerical studies are performed using a continuum damage model for the behavior of the substrate and a cohesive zone model for the behavior of the interface between the composite and the bond. The results of the simulations are presented and discussed.
引用
收藏
页码：50 / 57
页数：8
相关论文
共 50 条
  • [31] Inverse characterisation of gradient distribution of the modulus of bamboo using a four-point bending test
    Gao, Xianzhi
    Liu, Guangyan
    Wang, Lu
    Yi, Yanan
    Lin, Guang
    Ma, Shaopeng
    HOLZFORSCHUNG, 2021, 75 (07) : 626 - 634
  • [32] Modeling the Ligament Breakage Mechanism in Concrete Specimens Using a Four-Point Bending Test
    Fu, J. W.
    Haeri, H.
    Sarfarazi, V
    Marji, M. F.
    STRENGTH OF MATERIALS, 2022, 54 (04) : 671 - 680
  • [33] Modeling the Ligament Breakage Mechanism in Concrete Specimens Using a Four-Point Bending Test
    J. W. Fu
    H. Haeri
    V. Sarfarazi
    M. F. Marji
    Strength of Materials, 2022, 54 : 671 - 680
  • [34] Accelerated Thermal Fatigue Test of Metallized Ceramic Substrates for SiC Power Modules by Repeated Four-Point Bending
    Miyazaki, Hiroyuki
    Hyuga, Hideki
    Hirao, Kiyoshi
    Sato, Hiroshi
    Yamaguchi, Hiroshi
    Iwakiri, Shoji
    Hirotsuru, Hideki
    PRODCEEDINGS OF THE 2018 IEEE 30TH INTERNATIONAL SYMPOSIUM ON POWER SEMICONDUCTOR DEVICES AND ICS (ISPSD), 2018, : 264 - 267
  • [35] Experimental and Theoretical Study on the Failure of Sandwich Specimens with Tabs under Four-Point Bending
    Paimushin, V. N.
    Kholmogorov, S. A.
    Makarov, M. V.
    Levshonkova, N. V.
    UCHENYE ZAPISKI KAZANSKOGO UNIVERSITETA-SERIYA FIZIKO-MATEMATICHESKIE NAUKI, 2024, 166 (02): : 200 - 219
  • [36] Study of interfacial adhesion energy of multilayered ULSI thin film structures using four-point bending test
    Gan, ZH
    Mhaisalkar, SG
    Chen, Z
    Zhang, S
    Chen, Z
    Prasad, K
    SURFACE & COATINGS TECHNOLOGY, 2005, 198 (1-3): : 85 - 89
  • [37] Experimental investigation on interlaminar tension strength of curved composite laminates subjected to four-point bending load
    Huang, Whenchao
    Li, Changyou
    Xie, Liyang
    Jia, Dawei
    Zhang, Xiulu
    Fang, Caiwen
    ADVANCED COMPOSITE MATERIALS, 2023, 32 (01) : 107 - 132
  • [38] Fatigue-healing performance evaluation of asphalt mixture using four-point bending test
    Xiang, Hao
    Zhang, Wenwu
    Liu, Peng
    He, Zhaoyi
    MATERIALS AND STRUCTURES, 2020, 53 (03)
  • [39] Highly Reliable Four-Point Bending Test Using Stealth Dicing Method for Adhesion Evaluation
    FIRST, Tokyo Institute of Technology, Yokohama
    226-8503, Japan
    不详
    300, Taiwan
    不详
    143-8580, Japan
    Int. Conf. Electron. Packag., ICEP, 2019, (28-31):
  • [40] Loading Conditions Effects on Fatigue Life of Notched Rods Using Four-Point Bending Test
    Chouikhi, H.
    Mahdi, M.
    Saber, M.
    EXPERIMENTAL TECHNIQUES, 2024, 48 (06) : 1039 - 1052
12345