Effects of Nozzle Hole Number, Spray Included Angle and Compression Ratio on Combustion Characteristics in a Heavy-Duty Engine

被引：0
|
作者：
Choi, Minhoo [1 ]
Park, Sungwook [2 ]
机构：
[1] Hanyang Univ, Grad Sch, Dept Mech Convergence Engn, 222 Wangsimni Ro, Seoul 04736, South Korea
[2] Hanyang Univ, Sch Mech Engn, 222 Wangsimni Ro, Seoul 04736, South Korea
来源：
4TH THERMAL AND FLUIDS ENGINEERING CONFERENCE, ASTFE 2019 | 2019年
关键词：
Heavy-duty Engine; Nozzle hole Number; Spray Included Angle; Piston Chamber Geometry;
D O I：
暂无
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The purpose of this study is to analyze the effects of combustion on diesel spray included angle, nozzle hole number, and compression ratio. In order to investigate effects of each factor, the other factors except the comparison factor were kept constant under the same conditions. The results of the study were that as nozzle hole number increased, CO and Soot emissions and indicated specific fuel consumption were increased. In addition, the increase of included spray angle caused the spray could not evenly spread out to combustion chamber, CO and Soot emissions became increased. Finally, indicated specific fuel consumption was decreased that is because of compression ratio was increased.
引用
收藏
页数：4
相关论文
共 50 条
  • [21] Investigation of spray angle and combustion chamber geometry to improve combustion performance at full load on a heavy-duty diesel engine using genetic algorithm
    Hao, Caifeng
    Zhang, Zhijin
    Wang, Zhanguang
    Bai, Honglin
    Li, Yaozong
    Li, Yufeng
    Lu, Zhen
    Energy Conversion and Management, 2022, 267
  • [22] Investigation of spray angle and combustion chamber geometry to improve combustion performance at full load on a heavy-duty diesel engine using genetic algorithm
    Hao, Caifeng
    Zhang, Zhijin
    Wang, Zhanguang
    Bai, Honglin
    Li, Yaozong
    Li, Yufeng
    Lu, Zhen
    ENERGY CONVERSION AND MANAGEMENT, 2022, 267
  • [23] CFD analysis of combustion and emission characteristics of primary reference fuels: from transient Diesel spray to heavy-duty engine
    Zhou, Qiyan
    Lucchini, Tommaso
    D'Errico, Gianluca
    Novella, Ricardo
    Garcia-Oliver, Jose Maria
    Lu, Xingcai
    FUEL, 2021, 301
  • [24] Combustion sensitivity to the nozzle hole size in an active pre-chamber ultra-lean heavy-duty natural gas engine
    Onofrio, Gessica
    Napolitano, Pierpaolo
    Tunestal, Per
    Beatrice, Carlo
    ENERGY, 2021, 235
  • [25] Computational Optimization of Reactivity Controlled Compression Ignition in a Heavy-Duty Engine with Ultra Low Compression Ratio
    Dempsey, Adam B.
    Reitz, Rolf D.
    SAE INTERNATIONAL JOURNAL OF ENGINES, 2011, 4 (02) : 2222 - 2239
  • [26] Numerical investigations on the effects of EGR routes on the combustion characteristics and efficiency of a heavy-duty SI methanol engine
    Wei, Yanju
    Zhu, Zengqiang
    Liao, Yifei
    Liu, Shenghua
    Shi, Zihang
    Zeng, Zhixin
    Liu, He
    Guan, Wei
    FUEL PROCESSING TECHNOLOGY, 2023, 250
  • [27] The Effects of Injector Temperature on Spray Characteristics in Heavy-Duty Diesel Sprays
    Daly, Shane R.
    Hagen, Chris
    Cenker, Emre
    Pickett, Lyle M.
    Skeen, Scott A.
    SAE INTERNATIONAL JOURNAL OF ENGINES, 2018, 11 (06) : 879 - 891
  • [28] CFD Study of Reactivity Controlled Compression Ignition (RCCI) combustion in a heavy-duty diesel engine
    Kakaee, Amir-Hasan
    Rahnama, Pourya
    Paykani, Amin
    Periodica Polytechnica Transportation Engineering, 2015, 43 (04): : 177 - 183
  • [29] INVESTIGATION OF THE EFFECT OF ADDITIVES TO NATURAL GAS ON HEAVY-DUTY SI ENGINE COMBUSTION CHARACTERISTICS
    Gharehghani, A.
    Hosseini, R.
    Yusaf, T.
    JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2013, 5 : 677 - 687
  • [30] Numerical investigation of the effect of swirl number on performance, combustion, and emissions characteristics in a converted heavy-duty natural gas engine
    Aktas, Fatih
    PROGRESS IN COMPUTATIONAL FLUID DYNAMICS, 2024, 24 (03): : 162 - 173
12345